中国大陆活动地块的运动与应变状态

从地壳运动与应变的角度给出了活动地块的定义,根据中国大陆及周边地区最近几年GPS观测得到的由1598个GPS站速度组成的统一速度场,估计了各个活动地块的运动与应变参数,分析了各个活动地块的运动与应变状态。中国大陆各地块存在一致的向东运动分量,但其南北分量是不一致的。西部地块存在一致的向北运动分量,东部地块存在一致的向南运动分量。在90°E以东,从喜马拉雅地块向NE方向,各地块的运动方向按顺时针方向旋转,各地块的运动速率是不相同的。从总体上看是西部大、东部小,南部大、北部小,西部大约是东部的3～4倍。各地块主压应变方向的空间分布是不相同的。在90°E以西各地块的主应变方向基本上为SN向,在青藏高原的东北部各地块的主压应变方向基本为NE向,在青藏高原东南部各地块的主压应变方向绕喜马拉雅构造东端顺时针方向旋转。各地块的主应变与剪应变率也是不同的,其中喜马拉雅、天山地块的主压和最大剪应变率最高,其次是拉萨、羌塘、滇西南、祁连与川滇地块。东部各地块的应变率较小。根据应变状态推测,喜马拉雅地块南北向的缩短速率为(15.2±1.5)mm/a,仍然是现今构造活动最强烈的地区,其次是天山地块,天山地块南北向的缩短速率为(10.1±0.9)mm/a。这两个地块目前仍处于隆升状态,从面应变看,面膨胀在中国大陆占优势,东部基本都是膨胀区,在西部面压缩与面膨胀从南向北相间分布。中国大陆的大多数东西向或近东西向断裂两侧的相对运动都是左旋或类似左旋走滑型的,大多数南北向断裂两侧的相对运动都是右旋或类似右旋走滑型的。GPS测定的阿尔金断裂中部的左旋走滑速为(4.8±1.3)mm/a,鲜水河断裂的左旋走滑速为(9.8±2.2)mm/a。地块边界断裂带的运动为地块运动创造了条件,地块及其边界的运动是协调一致的统一的,各个地块的活动程度是不相同的,统计检验结果表明,大多数地块之间的相对运动是显著的与非常显著的,这证明活动地块是客观存在的,喜马拉雅、拉萨、天山、羌塘和滇西南是活动最强烈的地块,中蒙、中朝西、阿拉善和华南是较稳定的地块,印度、太平洋、菲律宾板块与欧亚板块的互相作用力是中国大陆地块运动的主要驱动力。青藏高原地壳物质在印度板块NNE向的强烈推挤下,向NNE和NE方向运动,由于受到北部、东北部和东部地块的阻挡,经高原的东南部向印度洋方向运移,     

依法行政,加强管理,提高防震减灾法制化管理能力和水平

结合广东省防震减灾工作实际，针对依法行政管理工作中存在的问题，提出强化法制观念，提高法制化管理水平；坚持依法行政，加强防震减灾行政执法工作；加强法律法规宣传教育，增强全社会防震减灾意识；认真履行管理职责，提高防震减灾管理能力和水平的建议。     

兰州地区冬季非尘暴降尘通量初步观测

现代黄土高原上冬季非尘暴条件下的大气粉尘,主要由来自黄土物源区的远源粉尘和黄土高原本身的近源粉尘共同组成。它们各自的贡献如何,以往的研究均未做过明确的讨论。由于前者的浓度及其相应的降尘通量在较小空间内的分布是比较均匀的,而后者则往往存在显著的差异性,因此可以通过对某个小区域内不同地点降尘通量的比较和分析来推断其贡献的大小。若各点的通量均很接近,则当地的大气粉尘应以远源输入为主,而来源于本地的近源粉尘贡献很小,或者近源的大气粉尘在空间上的分布也是很均匀的;若各点的通量相差悬殊,则表明本地来源的粉尘对总降尘通量具有显著的影响,并且,由各观测点中的最小降尘通量还可以近似了解远源.     

Synthesis of zeolites using fly ash and their application in removing heavy metals from waters

Fly ash is the solid waste of thermal power plants where coal is used as fuel, and its management and utilization have been of environmental concern for decades. Since the technique of synthesizing zeolite from coal fly ash was introduced by Holler[1] (19…     

鄂尔多斯盆地奥陶系马家沟组溶斑形成机理

鄂尔多斯盆地中部气田奥陶系马家沟组属蒸发边缘海相地层,其风化壳是中部气田的主要产气层段。该层中广泛发育毫米级、厘米级的溶斑,这些溶斑的产状、大小、成分以及溶孔内的充填物十分复杂,有的具多期充填,充填物为石膏、石英、方解石、白云石、高岭石、黄铁矿等多种矿物。溶斑中下半部残留的岩石经溶蚀后的白云石晶粒形成的渗流砂示底构造十分明显。研究表明,溶斑的形成不仅具有适宜的岩相古地理环境和其复杂的生成演化史,而且与原始沉积以及不同地史阶段的岩溶作用相关。     

Movement and strain conditions of active blocks in the Chinese mainland

The definition of active block is given from the angles of crustal deformation and strain. The movement and strain parameters of active blocks are estimated according to the unified velocity field composed of the velocities at 1598 GPS stations obtained from GPS measurements carried out in the past years in the Chinese mainland and the surrounding areas. The movement and strain conditions of the blocks are analyzed. The active blocks in the Chinese mainland have a consistent E-trending movement component, but its N and S components are not consistent. The blocks in the western part have a consistent N-trending movement and the blocks in the eastern part have a consistent S-trending movement. In the area to the east of 90°E, that is the area from Himalayas block towards NE, the movement direction of the blocks rotates clockwisely and the movement rates of the blocks are different. Generally, the movement rate is large in the west and south and small in the east and north with a difference of 3 to 4 times between the rates in the west and east. The distributions of principal compressive strain directions of the blocks are also different. The principal strain of the blocks located to the west of 90oE is basically in the SN direction, the principal compressive strain of the blocks in the northeastern part of Qingzang plateau is roughly in the NE direction and the direction of principal compressive strain of the blocks in the southeastern part of Qingzang plateau rounds clockwisely the east end of Himalayas structure. In addition, the principal strain and shear strain rates of the blocks are also different. The Himalayas and Tianshan blocks have the largest principal compressive strain and the maximum shear strain rate. Then, Lhasa, Qiangtang, Southwest Yunnan (SW Yunnan), Qilian and Sichuan-Yunan (Chuan-Dian) blocks followed. The strain rate of the blocks in the eastern part is smaller. The estimation based on the stain condition indicates that Himalayas block is still the area with the most intensive tectonic activity and it shortens in the NS direction at the rate of 15.2±1.5 mm/a. Tianshan block ranks the second and it shortens in the NS direction at the rate of 10.1±0.9 mm/a. At present, the two blocks are still uprising. It can be seen from superficial strain that the Chinese mainland is predominated by superficial expansion. Almost the total area in the eastern part of the Chinese mainland is expanded, while in the western part, the superficial compression and expansion are alternatively distributed from the south to the north. In the Chinese mainland, most EW-trending or proximate EW-trending faults have the left-lateral or left-lateral strike-slip relative movements along both sides, and most NS-trending faults have the right-lateral or right-lateral strike-slip relative movements along both sides. According to the data from GPS measurements the left-lateral strike-slip rate is 4.8±1.3 mm/a in the central part of Altun fault and 9.8±2.2 mm/a on Xianshuihe fault. The movement of the fault along the block boundary has provided the condition for block movement, so the movements of the block and its boundary are consistent, but the movement levels of the blocks are different. The statistic results indicate that the relative movement between most blocks is quite significant, which proves that active blocks exist. Himalayas, Tianshan, Qiangtang and SW Yunnan blocks have the most intensive movement; China-Mongolia, China-Korea (China-Korea), Alxa and South China blocks are rather stable. The mutual action of India, Pacific and Philippine Sea plates versus Eurasia plate is the principal driving force to the block movement in the Chinese mainland. Under the NNE-trending intensive press from India plate, the crustal matter of Qingzang plateau moves to the NNE and NE directions, then is hindered by the blocks located in the northern, northeastern and eastern parts. The crustal matter moves towards the Indian Ocean by the southeastern part of the plateau.     

高填方路堤互锚式薄壁挡土墙土压力试验研究

在山区修建高等级公路工程中，挡土墙结构广泛应用于高填方路堤工程。在提出一种新型互锚式薄壁挡土墙结构的基础上，通过埋设土压力盒的方法对该种挡土墙的结构型式进行了力学模型试验，并进行了模型土压力强度特性分析。试验及分析表明，该挡土墙结构成本低廉，施工方便，结构合理，可以应用于高填方路堤实际工程。     

综合物探在工程地质勘察中的应用

以衢州—窑上高速公路D、E合同段综合物探应用为例，本文介绍了高密度电阻率法、自然电位法、探地雷达等工作原理和方法，总结了综合物探在高速公路地质灾害调查，包括岩性、构造、岩溶等方面地球物理探测的应用成果，从而说明在高速公路路线勘察及施工过程中，物探工作是不可缺少的辅助手段。     

某住宅楼基础沉降原因分析及治理方法

通过工程事故勘察及原因分析，提出了用石灰桩配合注浆法加固处理自重湿陷性黄土地基的方法。科学、经济、快捷的治理，使工程事故得到了及时有效控制。     

宜兴抽水蓄能电站试验洞的反分析研究

结合江苏宜兴抽水蓄能电站地下厂房试验洞量测资料的分析,研究了成层各向异性岩体中洞室工程问题的反分析方法。采用分层均质模型进行反分析计算。计算区域的各层岩层均被分别视为均质各向同性体,初始地应力假设呈线性分布。有限元分析中,对倾斜成层的岩层、软弱夹层及断层节理等分别划分了单元,据以模拟成层岩体的各向异性特征。为使计算过程简化,对离洞室较远的岩层拟按地质资料对材料特性参数赋值,反分析计算的目标未知数为初始地应力和试验洞相邻围岩的弹性模量。结果表明,与工程实践符合较好。