New data on alstonite

New chemical and X-ray data on alstonite are reported. These indicate that alstonite is a double salt with formula CaBa(CO₂)₂ and that it has triclinic symmetry with a prominent orthorhombic pseudo-cell where $\text{a′}\text{= 5.02,}\text{b′}\text{= 8.70,}\text{c′}\text{= 6.12}\text{A}\text{?}\text{,}\text{z}\text{= 2}$, which correspondes closely to Gossner & Mussgnug? cell. The large number of weak super-structure reflections observed shows that the true cell (keeping the setting given by Gossner & Mussnug) has the following parameters: $\text{a = 30.14, b= 17.40, c = 6.12}\text{A}\text{?}\text{, α=β=γ=90°,}\text{Z}\text{= 24}$. The possible space groups are C₁ and C₁. The peculiar features of the diffraction pattern suggest that alstonite is probably an ordered member of a family of possible order-disorder structures.     

Coastal and estuarine habitat mapping, using LIDAR height and intensity and multi-spectral imagery

The airborne laser scanning LIDAR (LIght Detection And Ranging) provides high-resolution Digital Terrain Models (DTM) that have been applied recently to the characterization, quantification and monitoring of coastal environments. This study assesses the contribution of LIDAR altimetry and intensity data, topographically-derived features (slope and aspect), and multi-spectral imagery (three visible and a near-infrared band), to map coastal habitats in the Bidasoa estuary and its adjacent coastal area (Basque Country, northern Spain). The performance of high-resolution data sources was individually and jointly tested, with the maximum likelihood algorithm classifier in a rocky shore and a wetland zone; thus, including some of the most extended Cantabrian Sea littoral habitats, within the Bay of Biscay. The results show that reliability of coastal habitat classification was more enhanced with LIDAR-based DTM, compared with the other data sources: slope, aspect, intensity or near-infrared band. The addition of the DTM, to the three visible bands, produced gains of between 10% and 27% in the agreement measures, between the mapped and validation data (i.e. mean producer's and user's accuracy) for the two test sites. Raw LIDAR intensity images are only of limited value here, since they appeared heterogeneous and speckled. However, the enhanced Lee smoothing filter, applied to the LIDAR intensity, improved the overall accuracy measurements of the habitat classification, especially in the wetland zone; here, there were gains up to 7.9% in mean producer's and 11.6% in mean user's accuracy. This suggests that LIDAR can be useful for habitat mapping, when few data sources are available. The synergy between the LIDAR data, with multi-spectral bands, produced high accurate classifications (mean producer's accuracy: 92% for the 16 rocky habitats and 88% for the 11 wetland habitats). Fusion of the data enabled discrimination of intertidal communities, such as Corallina elongata, barnacles (Chthamalus spp.), and stands of Spartina alterniflora and Phragmites australis, which presented misclassification when conventional visible bands were used alone. All of these results were corroborated by the kappa coefficient of agreement. The high classification accuracy found here, selecting data sources, highlights the value of integrating LIDAR data with multi-spectral imagery for habitat mapping in the intertidal complex fringe.     

Biochemical alterations in juvenile carp (Cyprinus carpio) exposed to zinc: glutathione reductase as a target

The aim of this study was to investigate biochemical changes in juvenile carp (Cyprinus carpio) exposed to zinc chloride (10, 30 and 100 microM) for a period of 48 h. Zinc exposure caused a concentration-dependent reduction in glutathione reductase (GR) activity in gills, liver and brain. Gill glutathione S-transferase (GST) was reduced when animals were exposed to the highest concentration of 100 microM zinc. The phosphorylation of p38(MAPK) increased in the brain of fish exposed to zinc 100 microM, while phosphorylation of the extracellular signal-regulated protein kinase 1/2 (ERK1/2) and c-Jun N-terminal protein kinase 1/2 (JNK1/2) remained unchanged. Expression of proteins HSP60 and HSP70 were not affected by zinc exposure. Considering the significant concentration-dependent inhibition of GR in all tissues analyzed, this enzyme could be a potential biomarker of exposure to zinc, which has to be confirmed.     

Life history of the bathyal octopus Pteroctopus tetracirrhus (Mollusca,Cephalopoda) in the Mediterranean Sea

The life cycle of the deep-sea octopus Pteroctopus tetracirrhus was studied from monthly samples obtained throughout the year in different areas of the western Mediterranean (mainly around the Balearic Islands and along the coast of the Iberian Peninsula). A total of 373 individuals (205 females, 168 males) were analyzed; females ranged from 4.5 to 14.0 cm mantle length (ML) and males from 4.5 to 11.5 cm ML. There were few small-sized octopuses (<7 cm ML) in the samples, which might indicate that these individuals inhabit rocky grounds that are not accessible to trawlers or waters deeper than the maximum depth sampled (800 m). The species occurred more frequently around the Balearic Islands than along the Iberian Peninsula as they appeared in 20% and 7%, respectively, of the hauls in these areas. The octopus inhabits the lower continental shelf and upper slope in both areas, primarily between 200 and 500 m depth. Modal lengths were followed from autumn, when recruits were caught by trawlers, to summer, when reproduction took place. Females grew from 8 to 10 cm ML from winter to spring, but this modal size did not increase further in summer; males grew from 7 to 9 cm ML from winter to spring. The total disappearance of large individuals after summer suggests a life cycle lasting a single year. The evolution of the monthly mean sizes showed that the growth was best described by log-linear functions in both sexes. The length at first maturity was clearly higher in females (12 cm ML) than in males (8 cm ML). A total of 30 different prey items, belonging to four major taxonomic groups (crustaceans, osteichthyes, cephalopods and gastropods), were identified in the stomach contents. The diet of the octopus was based on crustaceans and teleosts, which accounted for 75% and 23% of the prey items, respectively. Cephalopods and gastropods were accessory prey as they only represented 1.6% and 0.7%, respectively, of the total. The octopus showed a marked preference for the benthic fish Symphurus nigrescens and the endobenthic crustacean Alpheus glaber. The bathymetric distribution of P. tetracirrhus coincides with those of these two main prey, which suggests that the distribution of the octopus might be strongly linked to its trophic resources.     

Prototype measurements and small-scale model tests of wave overtopping at shallow rubble-mound breakwaters: the Ostia-Rome yacht harbour case

The paper presents the comparison between the results of small-scale model tests and prototype measurements of wave overtopping at a rubble-mound breakwater. The specific structure investigated is the west breakwater of the yacht harbour of Rome at Ostia (Italy) and is characterized by a gentle seaward slope (1/4) and by a long, shallow foreshore. The laboratory tests firstly aimed at carefully reproducing two measured storms in which overtopping occurred and was measured. The tests have been carried out in two independent laboratories, in a wave flume and in a wave basin, hence using a two-dimensional (2-D) and a three-dimensional (3-D) setup. In the 2-D laboratory tests no overtopping occurred during the storm reproductions; in the 3-D case discharges five to ten times smaller than those observed in prototype have been measured. This indicates the existence of model and scale effects. These effects have been discussed on the basis of the results of several parametric tests, which have been carried out in both laboratories, in addition to the storm reproductions, varying wave and water level characteristics. Final comparison of all the performed tests with 86 prototype measurements still suggests the existence of scale and model effects that induce strong underestimation of overtopping discharge at small scale. The scale reproduction of wave breaking on the foreshore, together with the 3-D features of the prototype conditions and the absence of wind stress in the laboratory measurements, have been individuated as the main sources of scale and model effects. The paper also provides a comparison between the data and a largely used formula for wave overtopping discharges in the presence of structures similar to the one at hand. The suitable value of a roughness factor that appears in that formula is investigated and good agreement is found with other recent researches on rubble-mound breakwaters.     

The meteoritic origin of Tutankhamun's iron dagger blade

Scholars have long discussed the introduction and spread of iron metallurgy in different civilizations. The sporadic use of iron has been reported in the Eastern Mediterranean area from the late Neolithic period to the Bronze Age. Despite the rare existence of smelted iron, it is generally assumed that early iron objects were produced from meteoritic iron. Nevertheless, the methods of working the metal, its use, and diffusion are contentious issues compromised by lack of detailed analysis. Since its discovery in 1925, the meteoritic origin of the iron dagger blade from the sarcophagus of the ancient Egyptian King Tutankhamun (14th C. BCE) has been the subject of debate and previous analyses yielded controversial results. We show that the composition of the blade (Fe plus 10.8 wt% Ni and 0.58 wt% Co), accurately determined through portable x‐ray fluorescence spectrometry, strongly supports its meteoritic origin. In agreement with recent results of metallographic analysis of ancient iron artifacts from Gerzeh, our study confirms that ancient Egyptians attributed great value to meteoritic iron for the production of precious objects. Moreover, the high manufacturing quality of Tutankhamun's dagger blade, in comparison with other simple‐shaped meteoritic iron artifacts, suggests a significant mastery of ironworking in Tutankhamun's time.     

Infiltration effects on a two-dimensional molecular dynamics model of landslides

We propose a two-dimensional computational model for deep landslides triggered by rainfall, based on interacting particles or grains. The model describes a vertical section of a fictitious granular material along a slope, in order to study the behavior of a wide-thickness landslide. The triggering of the landslide is caused by the exceeding of two conditions: a threshold speed and a condition on the static friction of the particles, the latter based on the Mohr–Coulomb failure criterion (Coulomb in Mem Acad R Div Sav 7:343–387, 1776; Mohr in Abhandlungen aus dem Gebiete der Technischen Mechanik. Ernst, Berlin, 1914). The interparticle interactions are represented as a potential that, in the absence of suitable experimental data and due to the arbitrariness of the grain dimension, is modeled similarly to the Lennard-Jones’ one (Lennard-Jones in Proc R Soc Lond A 106(738):463–477, 1924), i.e., with an attractive and a repulsive part. For the updating of the particle positions, we use a molecular dynamics method, which is quite suitable for this type of systems (Herrmann and Luding in Continuum Mech Thermodyn 10:189–231, 1998). An infiltration scheme is introduced for modeling the increasing pore pressure due to the rainfall. Finally, we also introduce the viscosity in the dynamical equations of motion. The statistical characterization and dynamical behavior of the results of simulations are quite satisfactory relative to real landslides: We obtain a power law distribution of landslide triggering times, and the velocity patterns are typical of real cases, including the acceleration progression. Therefore, we can claim that this type of modeling can represent a new method to simulate landslides triggered by rainfall.     

Probabilistic estimates of future changes in California temperature and precipitation using statistical and dynamical downscaling

Sixteen global general circulation models were used to develop probabilistic projections of temperature (T) and precipitation (P) changes over California by the 2060s. The global models were downscaled with two statistical techniques and three nested dynamical regional climate models, although not all global models were downscaled with all techniques. Both monthly and daily timescale changes in T and P are addressed, the latter being important for a range of applications in energy use, water management, and agriculture. The T changes tend to agree more across downscaling techniques than the P changes. Year-to-year natural internal climate variability is roughly of similar magnitude to the projected T changes. In the monthly average, July temperatures shift enough that that the hottest July found in any simulation over the historical period becomes a modestly cool July in the future period. Januarys as cold as any found in the historical period are still found in the 2060s, but the median and maximum monthly average temperatures increase notably. Annual and seasonal P changes are small compared to interannual or intermodel variability. However, the annual change is composed of seasonally varying changes that are themselves much larger, but tend to cancel in the annual mean. Winters show modestly wetter conditions in the North of the state, while spring and autumn show less precipitation. The dynamical downscaling techniques project increasing precipitation in the Southeastern part of the state, which is influenced by the North American monsoon, a feature that is not captured by the statistical downscaling.     

On mean sea-level along the Brazilian coast

Summary. (Part 1) Fourier analyses of mean monthly sea-level data from Belém, Fortaleza, Salvador and Imbituba, ports on the Brazilian coast, are made with simultaneous data of air temperature, sea surface atmospheric pressure, atmospheric precipitation and evaporation. Results show that the mean monthly sea-levels of ports below Recife's latitude show peaks in February-March and April-May which are apparently related to the seasonal temperature changes and the combined action of precipitation, winds and oceanographic large-scale changes. The port of Belém showed a stronger semi-annual seasonal component, which seems to be related to the alternate southern and northern hemispheres' influences of the atmospheric precipitation. (Part 2 of the paper presented at the Symposium concerned the longer term changes of sea-level, including an analysis of principal components. These subjects will be treated in a separate paper.)