排序方式: 共有67条查询结果,搜索用时 296 毫秒
51.
随着全球经济的发展,世界各国都面临着严峻的资源危机,而开发利用深海固体矿产资源已成为许多国家的重要选择。人们越来越意识到,海洋已经成为实现新世纪人类社会经济可持续发展的重要空间。随着中国大洋调查的进展,有必要系统梳理世界国际海域深海多金属结核资源调查历程、研究现状及进展。深海多金属结核资源作为可能是海底分布最广、储量最大的金属资源,历来得到国际和国内学者的广泛关注。近几十年的调查和估算表明,全球海洋中大约覆盖了54×106km2的多金属结核,有商业开采潜力的资源量达75×109t。但是很多海域涉及到具体区域性的资源调查工作还有待开展,同时在新的理论认识如热液成因和生物化学作用在多金属结核形成过程中的影响以及如何使金属提取过程更加绿色环保和科学高效等学科已经逐渐成为各国学者关注的新方向。中国应该合理有效开展具有针对性的多金属结核调查,争取使中国在深海海域矿产资源的调查和开发工作中走在国际前列。 相似文献
52.
雅鲁藏布江米林宽谷段爬升沙丘粒度分异特征研究 总被引:3,自引:0,他引:3
雅鲁藏布江米林宽谷段爬升沙丘分布广泛。选择卧龙镇西侧雅鲁藏布江右岸典型爬升沙丘,根据沙丘爬升高度和叠置沙丘地貌部位对其表面沉积物进行了系统采样。作为河谷风沙地貌的重要组成部分,相应采集了河漫滩、阶地沙丘沙样品。粒度分析表明,爬升沙丘对河漫滩沙丘、阶地沙丘在物源和形成过程方面具有继承性,其表面沉积物以细沙和极细沙为主(2.07~3.71Φ),分选中等或较好(0.20~1.41Φ),细偏,多峰。由坡脚向丘顶的沉积物粒径变细,分选变好,偏度和峰度降低。爬升沙丘表面叠置沙丘的粒度向丘顶变粗、分选变好。细沙、极细沙等粒级组分与高度相关,反映颗粒爬升能力不同。叠置条带状沙丘脊部和槽部的粒度存在分异。 相似文献
53.
54.
To measure elastic wave velocities in rocks at high temperature and high pressure is an important way to acquire the mechanics and thermodynamics data of rocks in the earth's interior and also a substantial approach to studying the structure and composition of materials there. In recent years, a rapid progress has been made in methodology pertaining to the measurements of elastic wave velocities in rocks at high temperature and high pressure with solids as the pressure-transfer media. However, no strict comparisons have been made of the elastic wave velocity data of rocks measured at high temperature and high pressure by various laboratories. In order to compare the experimental results from various laboratories, we have conducted a comparative experimental study on three measuring methods and made a strict comparison with the results obtained by using the transmission method with fluid as the pressure-transfer medium. Our experimental results have shown that the measurements obtained by the three methods are comparable in the pressure ranges of their application. The cubic sample pulse transmission method used by Kern is applicable to measuring elastic wave velocities in crustal rocks at lower temperature and lower pressure. The prism sample pulse reflection-transmission method has some advantages in pressure range, heating temperature and measuring precision. Although the measurements obtained under relatively low pressure conditions by the prism sample pulse transmission method are relatively low in precision, the samples are large in length and their assemblage is simple. So this method is suitable to the experiments that require large quantities of samples and higher pressures. Therefore, in practical application the latter two methods are usually recommended because their measurements can be mutually corrected and supplemented. 相似文献
55.
高压下岩石弹性波速度几种测量方法的比较实验研究 总被引:2,自引:0,他引:2
在高压高温条件下测量岩石弹性波速是获得岩石在地球内部的各种力学和热力学数据的主要途径, 也是研究地球内部物质结构和组成的重要手段. 近年来, 用固体作为传压介质的高压高温岩石弹性波速测量方法发展较快, 然而目前各个实验室在高温高压条件下所测量出的岩石弹性波数据, 还没有进行过严格的对比. 为了对比各实验室的实验测量结果, 对3种测量方法进行了比较实验研究, 并与流体传压介质透射法的测量结果进行了对比. 实验表明, 3种测量方法在其适用压力范围内的测量结果都能相互对比. 其中Kern所使用的六面体样品脉冲透射法适用于压力温度较低的地壳类岩石样品的测量. 柱状样品脉冲反射-透射法在适用压力范围、加热温度和测量精度方面均有一定优势. 柱状样品脉冲透射法虽然在压力较低时测量精度较低, 但样品长度大, 组装简便, 适用于样品量大, 要求压力较高的实验. 因此在实际应用中, 后两种方法可进行相互校正和相互补充. 相似文献
56.
57.
58.
利用YJ-3000t和JL-3600t多顶砧压力机,以哀牢山造山带南部红河县大白能—乐育剖面上的天然块状斜长角闪岩为初始样品,在950℃、1.0~3.5GPa、恒温20~300h条件下进行了两个系列的斜长角闪岩块状样品脱水部分熔融实验:(1)保持温度T=950℃,加热时间t=100h不变,改变压力(1.0~3.5GPa)的实验;(2)保持温度T=950℃,压力p=3.0GPa不变,改变加热时间(20~300h)的实验。结果表明,1.0~3.5GPa、950℃、恒温100h的条件下,随压力升高,斜长角闪岩中依次生成了单斜辉石+石榴石+熔体的矿物组合(1.0~1.5GPa)和单斜辉石+石榴石+熔体+硬玉+SiO2矿物+蓝晶石(2.0~3.5GPa)的矿物组合。3.0GPa、950℃条件下,随加热时间增加,实验产物中依次生成了单斜辉石+石榴石+熔体+硬玉+SiO2矿物+蓝晶石的矿物组合(20~100h)和单斜辉石+石榴石+熔体的矿物组合(150~300h)。斜长角闪岩的原岩结构决定了实验产物中新生矿物和熔体的分布。依据实验产物的矿物组合和新生矿物的分布特征,讨论了950℃、1.0~3.5GPa、恒温(20~300h)条件下,斜长角闪岩部分熔融过程的结构变化、变质反应以及石榴石冠状体的成因。 相似文献
59.
60.