Sources of fine-sized organic matter in North Atlantic Heinrich Layers: δC and δN tracers

Organic carbon (OC) and total nitrogen (TN) concentrations and stable isotope ratios (δ¹³C, δ¹⁵N) of fine (<50 μm) size fractions of deep-sea sediments from the central North Atlantic were employed to identify changes in sources of organic matter over the past 50 ka BP. Ambient glacial sediments are characterised by values that reflect mixtures of marine and terrestrial inputs (averages ± 1σ: OC/TN = 7.6 ± 0.8; δ¹³C = −22.8 ± 1.0‰; δ¹⁵N = 5.5 ± 0.6‰). δ¹³C, OC, and TN concentrations shift to higher values during the Holocene, indicating a gradual decrease of fine terrigenous supply to the North Atlantic. The unchanged δ¹⁵N record between last glacial and Holocene stages indicates that the central North Atlantic region remained oligotrophic at least during the past 50 ka BP, but additional studies are required to support this result in terms of nitrogen oceanic budget. During the phases of enhanced ice-rafted detrital supply corresponding to prominent Heinrich events (HL₁, HL₂, HL₄, and HL₅), fine-sized sedimentary organic matter has lower OC and TN concentrations, contrasting sharply with those of ambient glacial sediments. Lower δ¹³C (down to −28‰) and δ¹⁵N (down to 1.6‰) values and high OC:TN ratios (up to 14.7 ± 1.1) are found for HL₁, HL₂, and with lesser extent for HL₄. These values reflect enhanced detrital supply originating from poorly differentiated soil horizons that characterise periglacial climate conditions and from organic matter-bearing rock sources of the underlying geological basement. During HL₅, only the δ¹³C offset records the input of fine size ice-rafted organic matter. Gradually changing soil development conditions during the time interval covering HL₅ to HL₁ (marine isotope stages 5 to 2), as well as varying erosion levels, have been hypothesized on the basis of constant δ¹³C, increasing OC/TN and decreasing δ¹⁵N values.     

Simulation of Meteorological Fields Within and Above Urban and Rural Canopies with a Mesoscale Model

Accurate simulation of air quality at neighbourhood scales (on order of 1-km horizontal grid spacing) requires detailed meteorological fields inside the roughness sub-layer (RSL). Since the assumptions of the roughness approach, used by most of the mesoscale models, are unsatisfactory at this scale, a detailed urban and rural canopy parameterisation, called DA-SM2-U, is developed inside the Penn State/NCAR Mesoscale Model (MM5) to simulate the meteorological fields within and above the urban and rural canopies. DA-SM2-U uses the drag-force approach to represent the dynamic and turbulent effects of the buildings and vegetation, and a modified version of the soil model SM2-U, called SM2-U(3D), to represent the thermodynamic effects of the canopy elements. The turbulence length scale is also modified inside the canopies. SM2-U(3D) assesses the sensible and latent heat fluxes from rural and urban surfaces in each of the computational layers inside the canopies by considering the shadowing effect, the radiative trapping by the street canyons, and the storage heat flux by the artificial surfaces. DA-SM2-U is tested during one simulated day above the city of Philadelphia, U.S.A. It is shown that DA-SM2-U is capable of simulating the important features observed in the urban and rural RSL, as seen in the vertical profiles of the shear stress, turbulent kinetic energy budget components, eddy diffusivity, potential air temperature, and specific humidity. Within the canopies, DA-SM2-U simulates the decrease of the wind speed inside the dense canopies, the skirting of the flow around the canopy blocks, warmer air inside the vegetation canopy than above open areas during the night and conversely during the day, and constantly warmer air inside the urban canopy. The comparison with measurements shows that the surface air temperature above rural and urban areas is better simulated by DA-SM2-U than by the `standard version' of MM5.     

Seismic Microzonation: A Comparison between Geotechnical and Seismological Approaches in Pointe-à-Pitre (French West Indies)

Pointe-à-Pitre, the main city of Guadeloupe in the French West Indies, has on several occasions been partially destroyed by major historical earthquakes. Moreover, a post-seismic assessment of the damage from the 1985 Montserrat earthquake indicates that the town is prone to site effects. Consequently, from 1996 to 1998, BRGM conducted a seismic microzonation study based on geotechnical and geological data. At the same time, three seismological studies were being conducted – two based on earthquake recordings using a time-series analysis and the classical spectral ratio (CSR) method (CETE/LCPC and BRGM), and the third based on noise measurement at 400 points using the horizontal-to-vertical noise ratio (HVNR) method (CETE/LCPC). The objective of this paper is not to carry out a new microzonation study by taking into account all the results, but rather to show in what respects the results of these different methods are in agreement or not. A comparison of the results of the seismological studies with the geotechnical microzonation shows that they are in fairly good agreement, albeit with some discrepancies. The results indicate that the seismological methods and the geotechnical data are highly complementary and should be used together in compiling seismic transfer-function microzonation maps. This revised version was published online in July 2006 with corrections to the Cover Date.     

The surface energy balance and the mixing height in urban areas—activities and recommendations of COST-Action 715

The specific problems of determining and simulating the surface energy balance (SEB) and the mixing height (MH) over urban areas are examined. The SEB and MH are critical components of algorithms and numerical models for the urban boundary layer, though the constituent parts of the SEB and the MH are not routinely measured by national weather services. Parameterisations are thus needed in applications. In this investigation, several recently developed algorithms and models for estimating the SEB and MH were applied to new datasets and assessed. Results are discussed in terms of the need for spatial resolution and the parameters needed to describe the urban atmosphere. Limitations of models are identified and recommendations for further development and observations are given. Having identified gaps in knowledge, key findings from new urban experiments and numerical modelling for the SEB and MH are given. The diurnal cycle for the SEB is significantly different from rural conditions—urban heat storage is needed in urban parameterisations. The urban MH is increased over the rural MH, as shown by several numerical schemes and careful sodar analyses. This work has been carried out within the COST-715 Action “Meteorology applied to urban air pollution problems (1998–2004). COST 715 reached a consensus proposing representatively sited measurements of meteorological parameters and turbulent fluxes above roof-tops, and recognised that such data are needed to improve numerical models of the urban surface processes.     

Observing water-level variations from space-borne high-resolution Synthetic Aperture Radar (SAR) image correlation

The potential of correlating high-resolution Synthetic Aperture Radar images to estimate local water-level variations is analysed based on observing the motions of floating structures. By computing range and azimuth offsets on a COSMO-SkyMed multi-temporal data-set in an area of the French Atlantic Coast, displacement signatures were detected in several harbours of the region. They can be associated with specific floating structures, whose vertical motion is mostly driven by tides. Although the image resolution is not the best achievable for the COSMO-SkyMed sensor, comparison with ground-based tide information revealed that the obtained space-borne measurements are consistent with the tide gauges to a decimetric accuracy. Even if the requirements for traditional users of tidal data are not met by the current revisit time of the COSMO-SkyMed constellation, the method proposed here provides complementary measures, which are already well aligned to requirements of users concerned with long-term sea-level variation and river or lake water stocks.     

Variability of the water stock dynamics in karst: insights from surface-to-tunnel geophysics

Hydrogeology Journal - A hydrogeophysical field experiment was conducted on a karst hydrosystem in the south of France to investigate groundwater transfer and storage variability at a scale of a...     

On the advantage of sharing a holdfast: effects of density and occurrence of kin aggregation in the kelp Lessonia berteroana

We investigated the density‐dependent and genetic relatedness that regulate the occurrence of inter‐individual (genet) fusion forming plurigenotypic organisms in the brown alga Lessonia berteroana. Recruitment generally occurs at high densities in the inter‐tidal, allowing contact of neighbouring holdfasts as they grow and expand on the substrate. Algal density, by contrast, is regulated by the effects of herbivory and wave impact, which often lead to low holdfast density. Herein, we investigated whether the occurrence of plurigenotypic organisms and their genotypic composition (number of genotypes per plurigenotypic organism) are density dependent and affected by kin selection in the inter‐tidal kelp L. berteroana. Four microsatellite loci were used to analyse DNA from 260 samples obtained from shared and non‐shared holdfasts, at two sites with high and two site with low holdfast density. Analyses showed that fusions forming plurigenotypic organisms are extremely common. Interestingly, the frequency of fusions was higher in low‐density sites, in which 100% of the plants had at least two genotypes and the average was 3.5. In high‐density sites, 62% of plants were plurigenotypic, with an average of 2.8 genotypes per plant. Additionally, we found that genotypes that shared a holdfast had a significantly higher genetic relatedness than the average in the population, compatible with a kin structure. Density dependence and kin structure suggest that the occurrence of plurigenotypic organisms is linked to environmental quality, and that kin or multilevel selection may be favouring the fusion of genetically related genets.     

Computation of GPS P1–P2 Differential Code Biases with JASON-2

GPS Differential Code Biases (DCBs) computation is usually based on ground networks of permanent stations. The drawback of the classical methods is the need for the ionospheric delay so that any error in this quantity will map into the solution. Nowadays, many low-orbiting satellites are equipped with GPS receivers which are initially used for precise orbitography. Considering spacecrafts at an altitude above the ionosphere, the ionized contribution comes from the plasmasphere, which is less variable in time and space. Based on GPS data collected onboard JASON-2 spacecraft, we present a methodology which computes in the same adjustment the satellite and receiver DCBs in addition to the plasmaspheric vertical total electron content (VTEC) above the satellite, the average satellite bias being set to zero. Results show that GPS satellite DCB solutions are very close to those of the IGS analysis centers using ground measurements. However, the receiver DCB and VTEC are closely correlated, and their value remains sensitive to the choice of the plasmaspheric parametrization.     

Stratigraphic hierarchy and three-dimensional evolution of an exhumed submarine slope channel system

Submarine slope channel systems have complicated three-dimensional geometries and facies distributions, which are challenging to resolve using subsurface data. Outcrop analogues can provide sub-seismic-scale detail, although most exhumed systems only afford two-dimensional constraints on the depositional architecture. A rare example of an accessible fine-grained slope channel complex set situated in a tectonically quiescent basin that offers seismic-scale, down-dip and across-strike exposures is the Klein Hangklip area, Tanqua-Karoo Basin, South Africa. This study investigates the three-dimensional architecture of this channel complex set to characterise the stratigraphic evolution of a submarine channel-fill and the implications this has for both sediment transport to the deep-oceans and reservoir quality distribution. Correlated sedimentary logs and mapping of key surfaces across a 3 km² area reveal that: (i) the oldest channel elements in channel complexes infill relatively deep channel cuts and have low aspect-ratios. Later channel elements are bound by comparatively flat erosion surfaces and have high aspect-ratios; (ii) facies changes across depositional strike are consistent and predictable; conversely, facies change in successive down depositional dip positions indicating longitudinal variability in depositional processes; (iii) stratigraphic architecture is consistent and predictable at seismic-scale both down-dip and across-strike in three-dimensions; (iv) channel-base-deposits exhibit spatial heterogeneity on one to hundreds of metres length-scales, which can inhibit accurate recognition and interpretations drawn from one-dimensional or limited two-dimensional datasets; and (v) channel-base-deposit character is linked to sediment bypass magnitude and longevity, which suggests that time-partitioning is biased towards conduit excavation and maintenance rather than the fill-phase. The data provide insights into the stratigraphic evolution and architecture of slope channel-fills on fine-grained continental margins and can be utilised to improve predictions derived from lower resolution and one-dimensional well data.