Reconstructing the ancestral (Plio-Pleistocene) Rio Grande in its active tectonic setting, southern Rio Grande rift, New Mexico, USA

Deposits of the ancestral Rio Grande (aRG) belonging to the Camp Rice Formation are preserved and exposed in the uplifted southern portion of the Robledo Mountains horst of the southern Rio Grande rift. The sediments are dated palaeomagnetically to the Gauss chron (upper Pliocene). The lower part of the succession lies in a newly discovered palaeocanyon cut into underlying Eocene rocks whose margins are progressively onlapped by the upper part. Detailed sedimentological studies reveal the presence of numerous river channel and floodplain lithofacies, indicative of varied deposition in channel bar complexes of low‐sinuosity, pebbly sandbed channels that traversed generally dryland floodplains and shifted in and out of the study area five times over the 1 Myr or so recorded by the succession. Notable discoveries in the deposits are: (1) complexes of initial avulsion breakout channels at the base of major sandstone storeys; (2) common low‐angle bedsets ascribed to deposition over low‐angle dunes in active channels; (3) palaeocanyon floodplain environments with evidence of fluctuating near‐surface water tables. Sand‐body architecture is generally multistorey, with palaeocurrents indicative of funnelling of initial avulsive and main fluvial discharge from the neighbouring Mesilla basin through a narrow topographic gap into the palaeocanyon and out over the study area. An avulsion node was evidently located at the stationary southern tip to the East Robledo fault during Gauss times, with aRG channels to the north flowing close to the fault and preventing fan progradation. Subsequent Matuyama growth of the fault caused (1) deposition to cease as the whole succession was uplifted in its footwall, (2) development of a thick petrocalcic horizon, and (3) fan progradation into the Mesilla basin. Parameters for the whole aRG fluvial system are estimated as: active single channels 2 m deep and 25 m wide; valley slope 0·24–0·065°; maximum mean aggradation rate 0·05 mm year^–1; major channel belt avulsion interval 200 ky; individual channel recurrence interval 100 ky; minimum bankfull mean flow velocity 1·54 m s^–1, minimum single‐channel discharge 77 m³ s^–1, bed shear stress 22·3 N m^–2; and stream power 34·3 W m^–2.     

Fear of crime: testing alternative hypotheses

This paper examines the spatial and social distribution of the fear of crime and the relationships of such fear with aspects of the environment. Through an analysis of a questionnaire survey conducted in a variety of areas in Stoke-on-Trent in the English Midlands, it considers both the causes of the fear of crime and the associations that have been identified with other dimensions shaping vulnerability. It concludes by offering some guidance on how to address the differences between those populations who fear crime most and those who are most vulnerable.     

Hot Neutral H in the Heliosphere: Elastic H-H, H-p Collisions

Williams et al. (1997) have suggested that a population of hot hydrogen atoms is created in the heliosphere through elastic H-H collisions between energetic `solar' atoms (neutralized solar wind) and interstellar atoms. They used a BGK-like approximation (Bhatnagar et al., 1954) for the Boltzmann collision term and the collision cross sections suggested by Dalgarno (1960). We show that both assumptions result in a significant overestimation of the the H-H collision effect. On the basis of calculated momentum transfer cross-sections for elastic H-H collisions, we argue that elastic H-H and H-p collisions cannot produce hot H atoms in the heliosphere. This revised version was published online in July 2006 with corrections to the Cover Date.     

Mitigating systematic error in topographic models for geomorphic change detection: accuracy,precision and considerations beyond off-nadir imagery

Unmanned aerial vehicles (UAVs) and structure-from-motion photogrammetry enable detailed quantification of geomorphic change. However, rigorous precision-based change detection can be compromised by survey accuracy problems producing systematic topographic error (e.g. ‘doming’), with error magnitudes greatly exceeding precision estimates. Here, we assess survey sensitivity to systematic error, directly correcting topographic data so that error magnitudes align more closely with precision estimates. By simulating conventional grid-style photogrammetric aerial surveys, we quantify the underlying relationships between survey accuracy, camera model parameters, camera inclination, tie point matching precision and topographic relief, and demonstrate a relative insensitivity to image overlap. We show that a current doming-mitigation strategy of using a gently inclined (<15°) camera can reduce accuracy by promoting a previously unconsidered correlation between decentring camera lens distortion parameters and the radial terms known to be responsible for systematic topographic error. This issue is particularly relevant for the wide-angle cameras often integrated into current-generation, accessible UAV systems, frequently used in geomorphic research. Such systems usually perform on-board image pre-processing, including applying generic lens distortion corrections, that subsequently alter parameter interrelationships in photogrammetric processing (e.g. partially correcting radial distortion, which increases the relative importance of decentring distortion in output images). Surveys from two proglacial forefields (Arolla region, Switzerland) showed that results from lower-relief topography with a 10°-inclined camera developed vertical systematic doming errors > 0·3 m, representing accuracy issues an order of magnitude greater than precision-based error estimates. For higher-relief topography, and for nadir-imaging surveys of the lower-relief topography, systematic error was < 0·09 m. Modelling and subtracting the systematic error directly from the topographic data successfully reduced error magnitudes to values consistent with twice the estimated precision. Thus, topographic correction can provide a more robust approach to uncertainty-based detection of event-scale geomorphic change than designing surveys with small off-nadir camera inclinations and, furthermore, can substantially reduce ground control requirements. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Gully erosion in Mangatu Forest,New Zealand,estimated from digital elevation models

The methodology and errors involved in determining the amount of sediment produced during two (19·5 and 33·2 year) periods by 11 (c. 0·01 − >0·20 km²) gullies within a 4 km² area in the headwaters of the Waipaoa River basin, New Zealand, using sequential digital elevation models are described. Sediment production from all gullies within the study area was 0·99 ± 0·03 × 10⁶ t a⁻¹ (2480 ± 80 t ha⁻¹ a⁻¹) during the period from 1939 to 1958. It declined to 0·62 ± 0·02 × 10⁶ t a⁻¹ (1550 ± 50 t ha⁻¹ a⁻¹) during the period from 1958 to 1992, when many of the smaller gullies were stabilized by a programme of afforestation, which commenced in 1960. Both figures are very high by global standards. The two largest (the Tarndale and Mangatu) gully complexes together generated 73 and 95 per cent of the sediment in the specified time periods, but the latter amount is equivalent to only c. 5 per cent of the total annual sediment load of the Waipaoa River. © 1998 John Wiley & Sons, Ltd.     

Fractal dimensions of suspended solids in streams: comparison of sampling and analysis techniques

Fluvial suspended sediment typically consists of a variety of complex, composite particles referred to as flocs. Floc characteristics are determined by factors such as the source, size and geochemical properties of the primary particles, chemical and biological coagulation processes in the water column and shear stress and turbulence levels in the stream. Studies of floc morphology have used two contrasting methods of sampling and analysis. In the first method, particles settle on a microscope slide and are observed from below using an inverted microscope. The second method uses filtration at no or low vacuum and particles deposited on the filter are observed with a microscope. Floc morphology can be quantified using fractal dimensions. The aims of the present study were to examine the effect of the two sampling methods on the fractal dimensions of particle populations, and to evaluate for each method how well the fractal dimensions at the various sampling sites reflect basin conditions. Suspended solids were collected in triplicate on inverted microscope slides and on 0·45 μm Millipore HA filters in two southern Ontario streams with contrasting riparian zones during a minor runoff event resulting from the melt of a freshly fallen snowpack. An image analysis system was used to determine area, longest axis and perimeter of particles. The morphology of the particle population of each sample was characterized using four fractal dimensions (D, D₁, D₂ and D_K). Systematic differences in fractal dimensions obtained with the two methods were observed. For the settling method, outlines of larger particles were frequently blurred because of the distance between the focal plane (the top of the inverted microscope slides) and the plane of the particle outline. In this method, the blurring of large particles can cause an increase in the projected area and length of the particle. The effect on the particle perimeter is unpredictable because it depends on the amount of detail lost through blurring and its effect on the apparent increase in particle size. Because of blurring, D and D₁ tend to be systematically lower for the settling method, whereas the net effect on D₂ is unpredictable. Particle size distributions derived from settling are typically coarser because small, low density particles may remain in the water column and all particles may not deposit on the slides. This loss of fines results in systematically lower D_K values for the settling method compared with the filtration method. Fractal dimensions and particle size distributions obtained with the filtration method were sensitive to and clearly indicated differences between drainage basins and between sites within each basin. These differences were explained by basin characteristics and conditions. Fractal dimensions and particle size distributions obtained with the settling method were less sensitive to drainage basin characteristics and conditions, which limits their usefulness as process indicators. Copyright © 1999 John Wiley & Sons, Ltd.     

Ethnohistoric and Geoarchaeological Landscape Chronology at Kawaihae,Leeward Hawai‘i Island

The royal court of the Kamehameha Dynasty in Kawaihae, Hawai‘i Island, presents an unequalled opportunity to examine the ethnohistoric rendering of a cultural landscape, in comparison to the geoarchaeological record of physical transformation of this same landscape. Beneath the surface, earlier occupation layers predate the historic royal precinct of the A.D. 1790s through 1820s. Drawing on results of 19 controlled excavations, point‐specific cultural activities are situated within the last several centuries of natural terrain formation, beginning A.D. 1200–1400 and ending A.D. 1830–present. Geoarchaeological excavations provide the means to place the stratified cultural deposits, occupational horizons, and activity areas in the context of depositional history, environmental transformation, and changing social circumstances in a continuous sequence. The material‐based geoarchaeological landscape chronology and the ethnohistorically defined cultural landscape are combined for a more holistic view than either one could provide independently.     

Dietary niche separation of three Late Pleistocene bear species from Vancouver Island,on the Pacific Northwest Coast of North America

Competition between taxa related to climate changes has been proposed as a possible factor in Pleistocene megafaunal extinctions, and here we present isotope evidence of the diets of three co-existing bear species [black bear (Ursus americanus), brown bear (Ursus arctos), and the now extinct short-faced bear (Arctodus simus)] from a locale in western North America dating to the Late (Terminal) Pleistocene (~14.5–11.7 ka). The three bear species were found at several sites on Vancouver Island, on the western coast of Canada. To examine the chronological overlap and niche partitioning between these species of bear, we used direct radiocarbon dating, stable isotope analysis and ZooMS proteomic identification methods. Here we present new radiocarbon evidence from Terminal Pleistocene U. americanus, U. arctos and A. simus from several sites on the island, along with both bulk collagen and compound-specific isotope data for these species. Radiocarbon dates confirm the chronological overlap of Arctodus and both Ursus species in the montane regions of the island at the end of the Pleistocene. Stable isotope data reveal niche differentiation between these species, with U. americanus occupying a distinctly lower trophic position than the other two taxa.     

Correlation of environmental and cultural chronology in New Caledonia

A case study in New Caledonia explores the changes in the natural and cultural setting at the end of the Lapita period in the first millennium B.C. After the mid‐Holocene highstand, sea level fell about 1.5 m, thereby enlarging coastal plains, altering previous mangrove and marshy settings, and transforming nearshore marine environments. Many of these changes occurred gradually over several centuries, but the termination of finely decorated Lapita pottery coincided with the first signs of loss of coastal habitat optimal for marine‐based horticulturalists in the first millennium B.C. Organized village compounds and extensively cultivated landscapes emerged much later, in the first millennium A.D. The results suggest that, although the Lapita phenomenon represents the founding ancestry of Oceanic societies, it also represents the end of an era and way of life that eventually could not be maintained in a changing world. © 2008 Wiley Periodicals, Inc.