Static telescope aberration measurement using lucky imaging techniques

A procedure has been developed to compute static aberrations once the telescope PSF has been measured with the lucky imaging technique, using a nearby star close to the object of interest as the point source to probe the optical system. This PSF is iteratively turned into a phase map at the pupil using the Gerchberg?CSaxton algorithm and then converted to the appropriate actuation information for a deformable mirror having low actuator number but large stroke capability. The main advantage of this procedure is related with the capability of correcting static aberration at the specific pointing direction and without the need of a wavefront sensor.     

An interval fuzzy model for magnetic monitoring: estimation of a pollution index

In this contribution, a methodology is reported in order to build an interval fuzzy model for the pollution index PLI (a composite index using relevant heavy metal concentration) with magnetic parameters as input variables. In general, modelling based on fuzzy set theory is designed to mimic how the human brain tends to classify imprecise information or data. The “interval fuzzy model” reported here, based on fuzzy logic and arithmetic of fuzzy numbers, calculates an “estimation interval” and seems to be an adequate mathematical tool for this nonlinear problem. For this model, fuzzy c-means clustering is used to partition data, hence the membership functions and rules are built. In addition, interval arithmetic is used to obtain the fuzzy intervals. The studied sets are different examples of pollution by different anthropogenic sources, in two different study areas: (a) soil samples collected in Antarctica and (b) road-deposited sediments collected in Argentina. The datasets comprise magnetic and chemical variables, and for both cases, relevant variables were selected: magnetic concentration-dependent variables, magnetic features-dependent variables and one chemical variable. The model output gives an estimation interval; its width depends on the data density, for the measured values. The results show not only satisfactory agreement between the estimation interval and data, but also provide valued information from the rules analysis that allows understanding the magnetic behaviour of the studied variables under different conditions.     

Shaking table testing and numerical simulation of the seismic response of a typical Mexican colonial temple

A shaking table testing program was undertaken with the main objective of providing basic information for the calibration of analytical models, and procedures for determining seismic response of typical stone masonry temples of the 16–18th centuries stone masonry construction in Mexico. A typical colonial temple was chosen as a prototype. A model at a 1:8 geometric scale was built with the same materials and techniques as the prototype, and was subjected to horizontal and vertical motions of increasing intensities. The maximum applied intensity corresponded to a base shear force of about 58 of the total building weight. Vertical component of the base motion significantly affected the response and increased the damage of the model. Damage patterns were similar to those observed in actual temples. Damping coefficients of the response ranged from 7 for undamaged state, reached about 14 for severe damage. The main features of the measured response were compared with those computed using a nonlinear, finite element model; for the latter, a constitutive law developed for plain concrete was adopted for reproducing cracking and crushing of the irregular stone masonry. Observed damage patterns as well as measured response could be reproduced with reasonable accuracy by the analytical simulation, except for some local vibrations, as those at the top of the bell towers. It can be concluded that the simple constitutive law adopted for the simulation was able to reproduce the experimental response with reasonable level of accuracy. Copyright © 2011 John Wiley & Sons, Ltd.     

Sea level forcing in the Mediterranean Sea between 1960 and 2000

Sea level trends and inter-annual variability in the Mediterranean Sea for the period 1960–2000 is explored by comparing observations from tide gauges with sea level hindcasts from a barotropic 2D circulation model, and two full primitive equation 3D ocean circulation models, a regional one and the Mediterranean component of a global one,. In the 2D model, 50% of the sea level variance was found to result from the wind and atmospheric pressure forcing. In the 3D models, 20% of the sea level variance was explained by the steric effects. The sea level residuals at the tide gauges locations, calculated by subtraction of the 2D model output from the sea level observations are significantly correlated (r = 0.4) with the steric signals from the 3D models. After the removal of the atmospheric and the steric contributions the tide-gauge sea level records indicate a period where sea level was stable (1960–1975) and a period where sea level was rising (1975–2000) with rates in the range 1.1–1.8 mm/yr. A part of the residual trend can be explained by the contribution of local land movements (0.3 mm/yr) while its major part indicates a global signal, probably mass addition, appearing after 1975.     

On the effect of the sampling frequency of sea level measurements on return period estimate of extremes—Southern European examples

Estimates of extreme sea levels and return periods have been based mainly on hourly sampling rates. Technological development has enabled the sampling rates to increase and sampling rates of 5–10 min are becoming increasingly common. In this paper we explore the relationship between extreme sea levels and estimated return periods based on hourly and shorter sampling periods in three tide-gauges one at the Atlantic coasts of Spain (Coruña), one in the western Mediterranean (Malaga) and one in the N. Adriatic (Trieste). Significant differences of several centimetres are found in the hourly and 5 min extremes. These reflect in significant underestimation of the 50-year return levels which in Trieste reach 38 cm. A theoretical relationship between the high and the low sampling rate of extremes is also tested. Thus updated 50-year return levels for the Mediterranean and the coasts of the Iberian peninsula are produced assuming that the differences identified in the various stations generalise to other tide-gauge (hourly) records for which hourly values have been analysed earlier.     

Impacts of land use on the hydrological response of tropical Andean catchments

Changes in land use and land cover are major drivers of hydrological alteration in the tropical Andes. However, quantifying their impacts is fraught with difficulties because of the extreme diversity in meteorological boundary conditions, which contrasts strongly with the lack of knowledge about local hydrological processes. Although local studies have reduced data scarcity in certain regions, the complexity of the tropical Andes poses a big challenge to regional hydrological prediction. This study analyses data generated from a participatory monitoring network of 25 headwater catchments covering three of the major Andean biomes (páramo, jalca and puna) and links their hydrological responses to main types of human interventions (cultivation, afforestation and grazing). A paired catchment setup was implemented to evaluate the impacts of change using a ‘trading space‐for‐time’ approach. Catchments were selected based on regional representativeness and contrasting land use types. Precipitation and discharge have been monitored and analysed at high temporal resolution for a time period between 1 and 5 years. The observed catchment responses clearly reflect the extraordinarily wide spectrum of hydrological processes of the tropical Andes. They range from perennially humid páramos in Ecuador and northern Peru with extremely large specific discharge and baseflows, to highly seasonal, flashy catchments in the drier punas of southern Peru and Bolivia. The impacts of land use are similarly diverse and their magnitudes are a function of catchment properties, original and replacement vegetation and management type. Cultivation and afforestation consistently affect the entire range of discharges, particularly low flows. The impacts of grazing are more variable but have the largest effect on the catchment hydrological regulation. Overall, anthropogenic interventions result in increased streamflow variability and significant reductions in catchment regulation capacity and water yield, irrespective of the hydrological properties of the original biome. Copyright © 2016 The Authors. Hydrological Processes. Published by John Wiley & Sons Ltd.     

Brown algae overproduce cell wall polysaccharides as a protection mechanism against the heavy metal toxicity

Brown algae are often used as heavy metal biomonitors and biosorbents because they can accumulate high concentrations of metals. Cation-exchange performed by cell wall polysaccharides is pointed out as the main chemical mechanism for the metal sequestration. Here, we biochemically investigated if the brown alga Padina gymnospora living in a heavy metal contaminated area would modify their polysaccharidic content. We exposed non-living biomass to Cd and Pb and studied the metals adsorption and localization. We found that raw dried polysaccharides, sulfate groups, uronic acids, fucose, mannose, and galactose were significantly higher in contaminated algae compared with the control ones. Metal concentrations adsorbed by non-living biomass were rising comparatively to the tested concentrations. Electron microscopy showed numerous granules in the cell walls and X-ray microanalysis revealed Cd as the main element. We concluded that P. gymnospora overproduces cell wall polysaccharides when exposed to high metal concentrations as a defense mechanism.     

Atmospheric inorganic aerosol of a non-industrial city in the centre of an industrial region of the North of Spain,and its possible influence on the climate on a regional scale

Mineral particles could have influenced on the climate of Oviedo, a non-industrial city situated in the centre of an industrial zone of the North of Spain, increasing the temperature and the precipitations, in spite of the fact that “greenhouse gases” concentrations have diminished in this city in recent years. The directive (1999/30/EC) of the European Commission began to be applied in Oviedo in the year 2003. In agreement with this norm, our first aim was the identification of the inorganic particulate matter of the PM10 and PM2.5 fractions sampled in this city. X-ray diffraction and scanning electron microscopy coupled with X-ray dispersive energy spectrometry were used. The percentages of the different mineral phases of the PM were obtained by a Rietveld refinement of powder X-ray diffraction data. The compositions of the PM10 and PM2.5 fractions of this city are similar. Sulphates are the most abundant particles in the both fractions. Most sulphates, nitrates and sal-ammoniac would have formed by reaction between solid, liquid and/or gas particles and they could be associated with the power stations near to the city and traffic. Wüstite and haematites come from the iron and steel industries of Gijón and Avilés. The main natural sources of halite and carbonates and silicates are sea spray and soil resuspension by the wind, respectively.