Lithospheric Electrical Structure across the Eastern Segment of the Altyn Tagh Fault on the Northern Margin of the Tibetan Plateau

Project INDEPTH (InterNational DEep Profiling of Tibet and the Himalaya) is an interdisciplinary program designed to develop a better understanding of deep structures and mechanics of the Tibetan Plateau. As a component of magnetotelluric (MT) work in the 4th phase of the project, MT data were collected along a profile that crosses the eastern segment of the Altyn Tagh fault on the northern margin of the plateau. Time series data processing used robust algorithms to give high quality responses. Dimensionality analysis showed that 2D approach is only valid for the northern section of the profile. Consequently, 2D inversions were only conducted for the northern section, and 3D inversions were conducted on MT data from the whole profile. From the 2D inversion model, the eastern segment of the Altyn Tagh fault only appears as a crustal structure, which suggests accommodation of strike slip motion along the Altyn Tagh fault by thrusting within the Qilian block. A large-scale off-profile conductor within the mid-lower crust of the Qilian block was revealed from the 3D inversion model, which is probably correlated with the North Qaidam thrust belt. Furthermore, the unconnected conductors from the 3D inversion model indicate that deformations in the study area are generally localized.     

基于图像测量的花键套端面尺寸检测

设计了一套基于图像测量技术的花键套端面尺寸检测系统,采用高分辨率工业相机获取零件图像信息,使用相机标定技术标定相机参数,以校正光学系统导致的零件图像畸变,通过图像处理技术处理并分析图像,得到图像特征尺寸信息,最后采用分区域标定像素当量的方法得到零件实际尺寸.使用该检测系统与三坐标测量仪检测系统进行对比实验,实验结果显示,该系统尺寸检测结果与三坐标测量仪检测结果比照相差不超过10 μm.每个零件检测时间不超过20 s,速度远远快于平均检测时间需约2 min的三坐标测量仪检测方法,因此在满足检测精度的基础上大大提高了检测速度,实现了花键套尺寸批量检测.     

Distribution of CMEs with Different Angular Widths and Comparison with the Phase of Sunspot Number in the 23rd Solar Cycle

The variation of the number of coronal mass ejections (CMEs) with different angular widths in the period of 1996-2008 is analyzed statistically in this paper, together with a comparison of the feature of time variation between the number of CMEs with some typical angular widths and the number of sunspots.     

Lateglacial landform associations at Jæren (SW Norway) and their glaci-dynamic implications

The Jæren lowland is located on the southwestern coast of Norway between a mountainous region in the east and the offshore Norwegian Channel in the west. During the Last Glacial Maximum, Jæren was in an intermediate position between an ice stream following the Norwegian Channel northwards, and westward flowing inland ice. The dynamic behaviour of the inland ice and the interaction with the ice stream are examined by means of geomorphological analysis of digital terrain models and sedimentological investigations. SW-trending drumlins were formed at Jæren below tributary ice from the inland, feeding into the Norwegian Channel Ice Stream. The presence of Rogen moraine in the central part of Jæren indicates a frozen substratum prior to their formation, and this suggests a transition to cold-based ice between the tributaries. The deglaciation of the Norwegian Channel at about 15 ka BP resulted in an unstable ice front for the inland ice sheet. The formation of Rogen moraine may be explained by a dynamic advance resulting in extensional flow and fracturing of the frozen substratum between the tributaries. The dynamic advance was followed by an early deglaciation of the coastal areas as evidenced by shallow marine sediments. Deformation of the shallow marine sand indicates a glacial readvance through the valleys formerly acting as tributaries to the ice stream.     

镧掺杂的二氧化钛纳米颗粒的合成、结构表征及光催化性能

以无水乙醇为溶剂、1-丁基-3-甲基咪唑四氟硼酸盐([Bmim]BF4)离子液体为表面活性剂,以钛酸四丁酯、六水合硝酸镧为原料,采用共沉淀法制备了不同掺镧量的La-TiO2光催化材料。采用X-射线衍射仪(XRD)、傅里叶变换红外光谱仪(FTIR)、场发射扫描电镜(FESEM)、差热-热重分析仪(TG-DSC)、紫外-可见吸收光谱仪(UV-vis)、比表面及孔隙度分析仪(BET)对其结构、形貌、热稳定性、光学性能及比表面积进行表征。所制备产品的光催化性能在紫外光下进行了光催化降解甲基橙实验,实验结果表明在离子液体的量为0.5mL,掺杂镧量为5%的TiO2纳米材料对甲基橙的降解效果相对较好,降解率最高达到98.73%。     

基于双差定位法的鄂尔多斯块体西北缘地震精定位研究

针对鄂尔多斯块体西北缘地震活动的复杂性及目前台网定位方法存在偏差的问题,采用双差定位法对2009—2019年发生在鄂尔多斯块体西北缘的地震事件进行重新定位。经研究表明,双差定位之后地震分布更集中,鄂尔多斯块体西缘的地震沿银川吉兰泰断陷带分布,北缘的地震沿河套断陷带分布,地震定位精度明显提高,这与块体周缘复杂的地质构造背景和动力学过程密切相关。定位结果可为进一步研究该区域的地震活动性等提供参考。     

Valence state partitioning of V between pyroxene‐melt: Effects of pyroxene and melt composition,and direct determination of V valence states by XANES. Application to Martian basalt QUE 94201 composition

Abstract— Experiments on a Martian basalt composition show that D_v augite/melt is greater than D_v pigeonite/melt in samples equilibrated under the same fO₂ conditions. This increase is due to the increased availability of elements for coupled substitution with the V³⁺ or V⁴⁺ ions, namely A1 and Na. For this bulk composition, both A1 and Na are higher in concentration in augite compared with pigeonite; therefore more V can enter augite than pigeonite. Direct valence state determination by XANES shows that the V³⁺ and V⁴⁺ are the main V species in the melt at fO₂ conditions of IW‐1 to IW+3.5, whereas pyroxene grains at IW‐1, IW, and IW+1 contain mostly V³⁺. This confirms the idea that V³⁺ is more compatible in pyroxene than V⁴⁺. The XANES data also indicates that a small percentage of V²⁺ may exist in melt and pyroxene at IW‐1. The similar valence of V in glass and pyroxene at IW‐1 suggests that V²⁺ and V³⁺ may have similar compatibilities in pyroxene.     

Partially Fused Granite Blocks from Mt. Elephant, Victoria, Australia

Petrological and chemical evidence is presented to show thatsmall patches of brown glass found in blocks of granite eruptedin basaltic scoria at Mt. Elephant are the result of the partialfusion of biotite and quartz. The glass has moderate SiO₂ (63–66per cent), high AI₂O₃ (17.5–19 per cent), high FeO (3.8–5.2per cent) and very high K₂O (7.0–7.8 per cent) relativeto Na₂O (3.3–3.7 per cent) and is similar in compositionto many high K alkali syenites and trachytes.     

考虑流固耦合效应的单桩式海上风电机组结构响应模拟

针对海上风电整机系统,建立了一体化流固耦合分析方法。在模拟过程中,采用浸入边界法解决风机叶片旋转引起的静动干涉问题,利用改进的守恒式 level set（简称 ICLS）方法捕捉海浪自由面,并使用交错迭代法求解流固耦合方程。通过构建 “风机—塔架—基础”一体化流固耦合数值模拟方法,能够在一次仿真计算中实现海上风电整机系统的全过程数值模拟,准确求解多荷载耦合作用下“风机—塔架—基础”的整体结构动力响应。以某单桩式海上风电工程为例,验证了本方法能够实现对海上风电整体系统的一体化分析。