Sulphur isotopic compositions of pyrite, anhydrite and native sulphur in volcanic ashes discharged by the 1979 eruption of Ontake volcano, Nagano, Japan were determined. The isotopic data indicate that sulphate in anhydrite and a part of native sulphur were produced by the disproportionation reaction of sulphite formed by dissolution of SO2 in volcanic gases into water which filled a mud reservoir probably located just below the crater zone. Some part of H2S in volcanic gases was fixed as pyrite and some was oxidised to form native sulphur. Hydrothermal alteration of country rocks to form pyrite, anhydrite and clay minerals had proceeded in the mud reservoir before eruption at temperatures ranging from 110° to 185°C which were estimated by oxygen isotopic fractionation between anhydrite and water.
Ti-rich hydroandradite often occurs, though usually as a minor constituent, in serpentinized ultramafic rocks and associated gabbroic rocks of the Sanbagawa metamorphic belt. The chemistry of the host rocks is commonly characterized by undersaturation with SiO2. Two Ti-rich hydroandradites from metasomatized gabbroic rocks of the Shibukawa area have been chemically analysed by the wet method. Mössbauer experiments indicate the presence of Fe3+ and Fe2+ in the octahedral sites of these Ti-rich hydroandradites. Wet chemical analyses for total reducing capacity of the present garnets by two different methods together with Mössbauer data imply the presence of octahedral Ti3+ in their structure. Ti-rich hydroandratites, apart from their hydrous property, have a similar crystal chemistry to natural Ti-rich andradites. Ti-rich hydroandradites were probably formed in rocks with unusual chemical compositions within a P-T region of 300–400° C and 4–7 kb under limited conditions of relatively low oxygen fugacity and low μCO2. 相似文献
Algae growing in an enclosed sea may inhibit eutrophication because they absorb nutrients in the water. However, dead algae often cause anaerobic conditions in the water just above and on sediment after they are deposited on the bottom. We found that Stichopus japonicus inhibited the anaerobic processes coupling water sulfite production in sediment. The present study investigates whether S. japonicus inhibits algal flourish and influences sediment properties such as organic matter contents. Aquarium experiments were carried out at Komatsushima port in Tokushima Prefecture, western Japan. The aquaria used in the experiments were supplied with water directly from the adjacent sea (6 L/min), laid with sand of 10 cm depths, and lighted at 12 h intervals. Six aquaria each containing a sea cucumber from Komatsushima port and six aquaria without any were used in the experiments. Water temperature ranged between 9 and 15 degrees C during December 2000 and April 2001. Salinity ranged between 32 per thousand and 34 per thousand. Algae began to cover the bottom of the aquaria without S. japonicus after 2 weeks, whereas no growth was evident in the aquaria containing sea cucumbers. Chlorophyll a concentration in the surface sediment of the aquaria with S. japonicus (6.1+/-3.6 microg/g, mean S.D.+/-standard deviation) was significantly lower than that without it (60+/-17 microg/g, U-test, p<0.05). Phaeophytin concentration in the surface sediment of the aquaria with S. japonicus (0.9+/-0.09 microg/g) was also significantly lower than that without it (4.5+/-1.0 microg/g, U-test, p<0.05). TOC concentration in the surface sediment of the aquaria with S. japonicus (2.6+/-1.3 microg/g) was slightly lower than that without it (4.0+/-1.2 microg/g). These results showed that algal biomass and organic matter concentration of the bottom were decreased in the presence of S. japonicus. Therefore, S. japonicus inhibits algal bloom and decrease the contents of organic matter deposited on the bottom of enclosed sea areas. 相似文献
— Earthquake faultings have a wide variety of slip behaviors, such as, a log-linear frequency-magnitude relation, characteristic earthquakes, slow slip events, and so on. We report a model which can reproduce a certain variety of observed complex slip behaviors on a fault. Our 3-D model simulates the seismic cycle on a shallow dipping subduction fault in a homogeneous elastic half-space, on which frictional sliding is controlled by a rate- and state-dependent friction law. We find that the behaviors of reproduced seismic cycles depend on a lateral dimension of a seismogenic zone (H) with respect to a constant seismogenic width in dip direction (W). The following three domains appear in the seismic cycle behaviors: (1) Regular, periodic behaviors when H is comparable to W; (2) transitional, quasi-periodic behaviors when H/W~ 3; and (3) complex behaviors when H/W is larger than about 4. The slip behavior in the domain (1) is characterized by a periodical recurrence of a characteristic earthquake, which is centered in strike direction. In the domain (2), although earthquakes are still centered, these recurrence intervals and the sizes are modulated within a certain range. Also, in the domain (3), earthquakes occur not only at the center but at various lateral positions on the seismogenic zone. In this domain, the log-linear frequency-magnitude relations, like the Gutenberg-Richter relation, are produced. Slow slip events also occur at source areas of the earthquakes. It is suggested that a heterogeneous stress distribution at a source region is important, as well as heterogeneities in friction properties on the fault, for understanding the wide variety of slip behaviors in faultings. 相似文献
Electrical images recorded with Resistivity-At-Bit (RAB) from two sites drilled during Ocean Drilling Program (ODP) Leg 196 were analyzed to study the effects of subduction at the Nankai margin. For the first time in the history of scientific deep-sea drilling in ODP, in situ complete borehole images of the décollement zone were obtained. Analyses of all drilling-induced fracture data indicated that the maximum horizontal compressive stress (SHmax) axes have an azimuth of 303°, and analyses of breakout data from RAB images indicated an azimuth of 310°. These azimuths approximate the convergence direction of the Philippine Sea plate towards the Eurasian plate. The frontal thrust at Site 808 was encountered at about 389 mbsf. Density, porosity, resistivity, and gamma ray data change across the frontal thrust. The décollement zone at the deformation front was identified between 937 and 965 mbsf. The base of the décollement is sharply defined as the maximum extent of conductive fracturing and is marked by abrupt changes in physical properties [Mikada, H., Becker, K., Moore, J.C., Klaus, A., Austin, G.L., Bangs, N.L., Bourlange, S., Broilliard, J., Brückmann, W., Corn, E.R., Davis, E.E., Flemings, P.B., Goldberg, D.B., Gulick, S.S., Hansen, M.B., Hayward, N., Hills, D.J., Hunze, S., Ienaga, M., Ishiguro, H., Kinoshita, M., Macdonald, R.D., McNeill, L., Obana, S., Hong, O.S., Peacock, S., Pettigrew, T.L., Saito, S., Sawa, T., Thaiprasert, N., Tobin, H.J., Tsurumi, H., 2002. Proc. ODP, Initial Rep., 196, College Station, TX, (Ocean Drilling Program)]. The upper boundary of the décollement is marked by several sets of conductive fractures and by high variability in physical properties. The décollement zone is characterized by intense brittle fracturing. These fractures are considered to be the consequence of cyclic stresses and high fluid pressures in this zone. We analyzed fracture dips and their orientations at both sites and found that they are all consistent with a unique stress field model surrounding the two sites. 相似文献
A 3729-m-deep geothermal research well, WD-1a, provides us with a unique opportunity to study initial petrographic features of a high-temperature granite just after solidification of magma. The well succeeded in collecting three spot-cores of the Kakkonda Granite that is a pluton emplaced at a shallow depth and regarded as a heat source of the active Kakkonda geothermal system. The core samples were collected at the present formation temperatures of 370, 410 and over 500°C. These samples are granodiorite to tonalite consisting mainly of plagioclase, quartz, hornblende, biotite and K-feldspar. A sample collected at a formation temperature of over 500°C possesses the following remarkable petrographic features compared to the other two samples. Interstitial spaces are not completely sealed. K-feldspar exhibits no perthite by the exsolution of albite lamella. Quartz includes glassy melt inclusions without devitrification. Hornblende is less intensively altered to actinolite, and biotite is not altered. This study directly confirmed that perthite in K-feldspar is a recrystallization texture formed at 410–500°C based on a comparison of the in situ temperatures of the samples. Chemical compositions of minerals were analyzed to compare temperatures determined from geothermometers in several publications to the in situ temperatures of the samples. 相似文献
To study the wind field within the atmospheric boundary layer over the Tokyo metropolitan area, Doppler lidar observations
were made 45 km north of Sagami Bay and 30 km west of Tokyo Bay, from 14 May to 15 June 2008. Doppler lidar on 27 May 2008
observed the vertical and horizontal wind structure of a well-developed sea-breeze front (SBF) penetrating from Sagami Bay.
At the SBF, a strong updraft (maximum w approximately equal to 5 m s−1) was formed with a horizontal scale of about 500 m and vertical scale of 2 km. The spatial relationship between the strong
updraft over the nose of the SBF and prefrontal thermal suggests that the strong updraft was triggered by interaction between
the SBF and the thermal. After the updraft commenced, a collocated ceilometer observed an intense aerosol backscatter up to
2 km above ground level. The observational results suggest that the near-surface denser aerosols trapped in the head region
of the SBF escaped from the nose of the SBF and were then vertically transported up to the mixing height by the strong updraft
at the SBF. This implies that these phenomena occurred not continuously but intermittently. The interaction situations between
the SBF and prefrontal thermal can affect the wind structure at the SBF and the regional air quality. 相似文献
Signals from the tsunami waves induced by the March 11, 2011 moment magnitude (Mw) 9.0 Tohoku-Oki earthquake and from subsequent resonances were detected as radial velocity variability by a high-frequency ocean surface radar (HF radar) installed on the eastern coast of the Kii Channel, at a range of about 1000 km from the epicenter along the eastern to southern coasts of Honshu Island. A time–distance diagram of band-passed (9–200 min) radial velocity along the beam reveals that the tsunami waves propagated from the continental shelf slope to the inner channel as progressive waves for the first three waves, and then natural oscillations were excited by the waves; and that the direction of the tsunami wave propagation and the axis of the natural oscillations differed from that of the radar beam. In addition, spectral analyses of the radial velocities and sea surface heights obtained in the channel and on the continental shelf slope suggest complex natural oscillation modes excited by the tsunami waves. 相似文献