Comparison of methods for quantifying active layer dynamics and bedload discharge in armoured gravel‐bed rivers

Several methods were employed in the Ardennian rivers (Belgium) to determine the depth of the active layer mobilized during floods and to evaluate the bedload discharge associated with these events. The use of scour chains has shown that the depth of the active layer is systematically less than the b‐axis of the average particle size (D₅₀) of the elements which compose the surface layer of the riffles. This indicates that only a partial transport exists during low magnitude floods. The bedload discharge has been evaluated by combining data obtained using the scour chains technique and the distance covered by tracers. Quantities of sediment transported during frequent floods are relatively low (0·02 t km^–2) due to the armour layer which protects the subsurface material. These low values are also related to the fact that the distance calculated for mobilized bedload only applies to tracers fitted with PIT (passive integrated transponder)‐tags (diameter > 20 mm), whereas part of the bedload discharge is composed of sand and fine gravel transported over greater distances than the pebbles. The break‐up of the armour layer was observed only once, for a decennial discharge. During this event, the bedload discharge increased considerably (2 t km^–2). The use of sediment traps, data from dredging and a Helley–Smith sampler confirm the low bedload transport in Ardennian rivers in comparison to the bedload transport in other geomorphological contexts. This difference is explained by the presence of an armoured layer but also by the imbricated structures of flat bed elements which increase the resistance to the flow. Finally, the use of the old iron industry wastes allowed to quantify the thickness of the bed reworked over the past centuries. In the Lembrée River, the river‐bed contains slag elements up to a depth of about 50 cm, indicating that exceptional floods may rework the bed to a considerable depth. Copyright © 2012 John Wiley & Sons, Ltd.     

Un réseau fluviatile d'âge Burdigalien terminal dans le Sud-Est de la France : remplissage,extension, âge,implications

An integrated study combining facies analysis, multiple group biostratigraphy, identification of depositional sequences and mapping has been conducted on the Miocene Molasse Basin of the external Alps (southeastern France). The filling of the basin is described as resulting from a succession of fluvial incisions subsequently filled during marine transgressions. The major incision is dated as Latest Burdigalian and the major transgression as Langhian. This revised interpretation of the Miocene physiographic evolution of the Molasse Basin implies a re-examination of previous stratigraphic correlations within the basin. To cite this article: D. Besson et al., C. R. Geoscience 337 (2005).     

Cr-rich megacrysts of clinopyroxene and garnet from Lac de Gras kimberlites,Slave Craton,Canada – implications for the origin of clinopyroxene and garnet in cratonic lherzolites

Kimberlites from the Diavik and Ekati diamond mines in the Lac de Gras kimberlite field contain abundant large (>1 cm) clinopyroxene (Cr-diopside) and garnet (Cr-pyrope) crystals. We present the first extensive mineral chemical dataset for these megacrysts from Diavik and Ekati and compare their compositions to cratonic peridotites and megacrysts from the Slave and other cratons. The Diavik and Ekati Cr-diopside and Cr-pyrope megacrysts are interpreted to belong to the Cr-rich megacryst suite. Evidence for textural, compositional, and isotopic disequilibrium suggests that they constitute xenocrysts in their host kimberlites. Nevertheless, their formation may be linked to extensive kimberlite magmatism and accompanying mantle metasomatism preceding the eruption of their host kimberlites. It is proposed that the formation of megacrysts may be linked to failed kimberlites. In this scheme, the Cr-rich megacrysts are formed by progressive interaction of percolating melts with the surrounding depleted mantle (originally harzburgite). As these melts percolate outwards, they may contribute to the introduction of clinopyroxene and garnet into the depleted mantle, thereby forming lherzolite. This model hinges on the observation that lherzolitic clinopyroxenes and garnets at Lac de Gras have compositions that are strikingly similar to those of the Cr-rich megacrysts, in terms of major and trace elements, as well as Sr isotopes. As such, the Cr-rich megacrysts may have implications for the origin of clinopyroxene and garnet in cratonic lherzolites worldwide.

     

Track of fluid paleocirculation in dolomite host rock at regional scale by the Anisotropy of Magnetic Susceptibility (AMS): An example from Aptian carbonates of La Florida,Northern Spain

The present study aims to apply the AMS method (Anisotropy of Magnetic Susceptibility) at a regional scale to track the fluid circulation direction that has produced an iron metasomatism within pre-existing dolomite host rock. The Urgonian formations hosting the Zn–Pb mineralizations in La Florida (Cantabria, northern Spain) have been taken as target for this purpose. Sampling was carried out, in addition to ferroan dolomite host rock enclosing the Zn–Pb mineralizations, in dolomite host rock and limestone to make the comparison possible between magnetic signals from mineralized rocks, where fluid circulation occurred, and their surrounding formations. AMS study was coupled with petrofabric analysis carried out by texture goniometry, Scanning Electron Microscopy (SEM) observations and also Shape Preferred Orientation (SPO) statistics. SEM observations of ferroan dolomite host rock illustrate both bright and dark grey ribbons corresponding respectively to Fe enriched and pure dolomites. SPO statistics applied on four images from ferroan dolomite host rock give a well-defined orientation of ribbons related to the intermediate axis of magnetic susceptibility K₂. For AMS data, two magnetic fabrics are observed. The first one is observed in ferroan dolomite host rock and characterized by a prolate ellipsoid of magnetic susceptibility with a vertical magnetic lineation. The magnetic susceptibility carrier is Fe-rich dolomite. These features are probably acquired during metasomatic fluid circulations. In Fe-rich dolomite host rock, ?c? axes are vertical. As a rule, (0001) planes (i.e. planes perpendicular to ?c? axes) are isotropic with respect to crystallographic properties. So, the magnetic anisotropy measured in this plane should reflect crystallographic modification due to fluid circulation. This is confirmed by the texture observed using the SEM. Consequently, AMS results show a dominant NE–SW elongation interpreted as the global circulation direction and a NW–SE secondary elongation that we have considered as sinuosities of the fluid trajectory. The second type of magnetic fabric is essentially observed in the limestone and characterized by an oblate form of the ellipsoid of magnetic susceptibility, a horizontal magnetic foliation and mixed magnetic susceptibility carriers. It is interpreted as a sedimentary fabric.     

On the laboratory procedure for processing unconsolidated sediment samples to concentrate subfossil seed and other plant macroremains

Macrofossil analysis is becoming increasingly used as an approach to vegetation history in late Quaternary palaeoenvironmental studies. Macrofossils can be recovered from many terrestrial and lacustrine settings. Although the laboratory techniques are straightforward and are described in outline in several textbooks, the practical details of the extraction procedure are not widely available. This paper provides a detailed breakdown of the steps involved in extracting macroremains from unconsolidated (non-lithified) Quaternary sediments, with reasons for the various steps and practical details of how the extraction is accomplished. It is intended as a “how-to” laboratory manual for students and researchers undertaking macrofossil analysis.     

Late Pleistocene paleoecology of arctic ground squirrel (Urocitellus parryii) caches and nests from Interior Alaska's mammoth steppe ecosystem, USA

Botanical analyses of fossil and modern arctic ground squirrel (Urocitellus parryii) caches and nests have been used to reconstruct the past vegetation from some parts of Beringia, but such archives are understudied in Alaska. Five modern and four fossil samples from arctic ground squirrel caches and nests provide information on late Pleistocene vegetation in Eastern Beringia. Modern arctic ground squirrel caches from Alaska's arctic tundra were dominated by willow and grass leaves and grass seeds and bearberries, which were widespread in the local vegetation as confirmed by vegetation surveys. Late Pleistocene caches from Interior Alaska were primarily composed of steppe and dry tundra graminoid and herb seeds. Graminoid cuticle analysis of fossil leaves identified Calamagrostis canadensis, Koeleria sp. and Carex albonigra as being common in the fossil samples. Stable carbon isotopes analysis of these graminoid specimens indicated that plants using the C₃ photosynthetic pathways were present and functioning with medium to high water-use efficiency. Fossil plant taxa and environments from ground squirrel caches in Alaska are similar to other macrofossil assemblages from the Yukon Territory, which supports the existence of a widespread mammoth steppe ecosystem type in Eastern Beringia that persisted throughout much of the late Pleistocene.     

Pasisar: Performances of a High and Very High Resolution Hybrid Deep-Towed Seismic Device

The Pasisar seismic acquisition system combines a source at the sea surface and a deep-towed single channel streamer. This unconventional device geometry reduces the width of the first Fresnel zone which increases the lateral resolution. However, the device acquisition geometry generates artifacts on seismic profiles and induces large incidence angles of the seismic signal. A specific processing sequence must be applied to the data to obtain a readable seismic section. Penetration of the seismic signal depends on the energy of the signal reaching the seafloor and on its incidence angle. Because of smaller source energy, 800 Joules Sparker data cannot be acquired in water depth larger than 1500 m for example, whereas there is no depth limit for the use of this system with air gun sources. Differential acoustic absorption of seismic frequencies (below 1000 Hz) in the water column is negligible when compared with wave fronts expansion. Thus, the horizontal resolution of any seismic system strongly depends on the frequency spectrum of the seismic source and on the travel distances. Pasisar and conventional seismic profiles being usually simultaneously recorded, we illustrate the interest of using a hybrid seismic device by comparing horizontal resolutions as well as signal-to-noise ratio obtained with both the Pasisar and conventional systems. In addition, by carefully picking time arrivals of a reflection on simultaneously recorded surface and deep-towed seismic records, it is possible to estimate the average interval seismic velocity. We present the simplified example of a horizontal reflector.