Observations of flux rope – associated particle bursts with GEOTAIL in the distant tail

Geotail energetic particle, magnetic field data and plasma observations (EPIC, MGF and CPI experiments) have been examined for a number of energetic particle bursts in the distant tail (120Re < |X_GSM| < 130 Re), associated with moving magnetic field structures, following substorm onsets. The features obtained from this data analysis are consistent with the distant magnetotail dynamics determined first by ISEE3 observations and explained in terms of the neutral line model. At the onset of the bursts, before plasma sheet entrance, energetic electrons appear as a field-aligned beam flowing in the tailward direction, followed by anisotro-pic ions. Within the flux rope region, suprathermal ions exhibit a convective anisotropy, which allows determination of the plasma flow velocity, assuming that the anisotropy arises from the Compton-Getting effect. The velocities thus determined in the plasma sheet are estimated to be 200–650 km/s, and compare favourably with the velocities derived from the CPI electron and proton experiment. The estimated length of magnetic field structures varies between 28 and 56 Re and depends on the strength of the westward electrojet intensification. Finally, the three structures reported here show clear magnetic field signatures of flux rope topology. The existence of a strong magnetic field aligned approximately along the Y-axis and centred on the north-to-south excursion of the field, and the bipolar signature in both By and/or Bz components, is consistent with the existence of closed field lines extending from Earth and wrapping around the core of the flux rope structure.     

Correcting the Smoothing Effect of Ordinary Kriging Estimates

The smoothing effect of ordinary kriging is a well-known dangerous effect associated with this estimation technique. Consequently kriging estimates do not reproduce both histogram and semivariogram model of sample data. A four-step procedure for correcting the smoothing effect of ordinary kriging estimates is shown to be efficient for the reproduction of histogram and semivariogram without loss of local accuracy. Furthermore, this procedure provides a unique map sharing both local and global accuracies. Ordinary kriging with a proper correction for smoothing effect can be revitalized as a reliable estimation method that allows a better use of the available information.     

Different thermal preferences for brooding and larval dispersal of two neighboring shrimps in deep‐sea hydrothermal vent fields

Temperature is an important factor affecting the distributions and life‐history traits of marine animals. Deep‐sea hydrothermal vents are suitable environments to examine ecologic differences related to temperature, due to the steep temperature gradients around the vents. Rearing experiments under various temperature conditions (5–30 °C) at atmospheric pressure demonstrated a difference in thermal effects on egg hatching and larva in two co‐occurring, vent‐associated alvinocaridid shrimps – the peripherally distributed Alvinocaris longirostris and the centrally distributed Shinkaicaris leurokolos. The duration before hatching became shorter as temperature increased, while the maximum hatching rate occurred at higher temperatures in S. leurokolos (10–20 °C) than in A. longirostris (10 °C). Hatched larvae of both species were negatively buoyant, and larva with normal abdominal length could actively swim and stay suspended in the mid‐ or surface water layers of the culture plates under our experimental conditions. However, no larvae settled or metamorphosed into juveniles under the rearing conditions used in this study. Larvae with shortened abdomens occurred under most of the experimental conditions, although they were less frequent at 10 °C in A. longirostris and 20 °C in S. leurokolos. The maximum survival periods at these temperatures were 88 days in A. longirostris and 30 days in S. leurokolos. These characteristics may cause differences in the distributional ranges of the two species. The present results indicate that temperature is an important factor controlling life‐history traits of vent shrimps.     

High-reliability zircon separation for hunting the oldest material on Earth: An automatic zircon separator with image-processing/microtweezers-manipulating system and double-step dating

Despite the recent development in radiometric dating of numerous zircons by LA-ICPMS, mineral separation still remains a major obstacle, particularly in the search for the oldest material on Earth. To improve the efficiency in zircon separation by an order of magnitude, we have designed/developed a new machine-an automatic zircon separator(AZS). This is designed particularly for automatic pick-up of100 μm-sized zircon grains out of a heavy mineral fraction after conventional separation procedures. The AZS operates in three modes:(1) image processing to choose targeted individual zircon grains out of all heavy minerals spread on a tray,(2) automatic capturing of the individual zircon grains with microtweezers, and(3) placing them one-by-one in a coordinated alignment on a receiving tray. The automatic capturing was designed/created for continuous mineral selecting without human presence for many hours. This software also enables the registration of each separated zircon grain for dating, by recording digital photo-image, optical(color) indices, and coordinates on a receiving tray. We developed two new approaches for the dating; i.e.(1) direct dating of zircons selected by LA-ICPMS without conventional resin-mounting/polishing,(2) high speed U-Pb dating, combined with conventional sample preparation procedures using the new equipment with multiple-ion counting detectors(LA-MIC-ICPMS).With the first approach, Pb-Pb ages obtained from the surface of a mineral were crosschecked with the interior of the same grain after resin-mounting/polishing. With the second approach, the amount of time required for dating one zircon grain is ca. 20 s, and a sample throughput of 150 grains per hour can be achieved with sufficient precision(ca. 0.5%).We tested the practical efficiency of the AZS, by analyzing an Archean Jack Hills conglomerate in Western Australia with the known oldest(4.3 Ga) zircon on Earth. Preliminary results are positive; we were able to obtain more than 194 zircons that are over 4.0 Ga out of ca. 3800 checked grains, and 9 grains were over 4300 Ma with the oldest at 4371 ± 7 Ma. This separation system by AZS, combined with the new approaches, guarantees much higher yield in the hunt for old zircons.     

Dynamic evolution of nutrient discharge under stormflow and baseflow conditions in a coastal agricultural watershed in Ishigaki Island,Okinawa, Japan

Excessive terrestrial nutrient loadings adversely impact coral reefs by primarily enhancing growth of macroalgae, potentially leading to a phase‐shift phenomenon. Hydrological processes and other spatial and temporal factors affecting nutrient discharge must be examined to be able to formulate effective measures for reducing nutrient export to adjacent reefs. During storm events and baseflow periods, water samples were obtained from the tropical Todoroki River, which drains an intensively agricultural watershed into Shiraho coral reef. In situ nutrient analyzers were deployed for 6 months to hourly measure dissolved nutrient (NO₃⁻‐N and PO₄³⁻‐P) concentrations. Total phosphorus (TP) and suspended solid concentration (TSS) were increased by higher rainfall intensity (r = 0·94, p < 0·01) and river discharge Q (r = 0·88, p < 0·01). In contrast, NO₃⁻‐N concentration tends to decrease drastically (e.g. from 3 to 1 mg l⁻¹) during flood events. When base flow starts to dominate afterwards, NO₃⁻‐N manifested an increasing trend, but decreases when baseflow discharge becomes low. This counter‐clockwise hysteresis for NO₃⁻‐N highlights the significant influence of groundwater discharge. N delivery can therefore be considered a persistent process compared to sediment and P discharge, which are highly episodic in nature. Based on GIS analysis, nutrient concentration along the Todoroki River was largely affected by the percentage of sugarcane/bare areas and bedrock type. The spatial distribution of N concentration in the river reflects the considerable influence of subsurface geology—higher N levels in limestone‐dominated areas. P concentrations were directly related to the total length of artificial drainage, which enhances sediment transport. The use of high‐resolution monitoring data coupled with GIS‐based spatial analysis therefore enabled the clarification of control factors and the difference in the spatio‐temporal discharge characteristics between N and P. Thus, although erosion‐reduction schemes would reduce P discharge, other approaches (e.g. minimize fertilizer) are needed to reduce N discharge. Copyright © 2010 John Wiley & Sons, Ltd.     

Picritic primary magma and its source mantle for Oshima-Ōshima and back-arc side volcanoes,Northeast Japan arc

Oshima-shima volcano is an endmember of a geochemical variation which is characterized by a low FeO content toward the back-arc side across the NE Japan arc. Analyses of the basalts show primitive characteristics. Variation trends of the chemical compositions indicate initial olivine control then olivine+clinopyroxene control from a picritic to a differentiated basalt. The more magnesian basalts have the more magnesian olivine phenocrysts. The most magnesian (MgO 15%) of all rock samples, contains olivine phenocrysts with a composition of Fo 93.7 as a liquidus phase and is considered a product of a mantle-derived magma. The possible range in FeO and MgO content of source mantle for the Oshima-shima magma can be demonstrated. Ichinomegata lherzolite inclusions, also from the back-arc side of NE Japan, is unlikely to be a candidate for the source mantle for high FeO. The upper mantle beneath the back-arc side is considered to be compositionally zoned; a Fe-rich mantle (Ichinomegata lherzolite) at shallower place and a Fe-poor mantle (the source mantle for back-arc side volcanoes).     

Fractionation of sulfur isotopes and selenium between coexisting sulfide minerals from the Besshi deposit,Central Shikoku,Japan

Fractionation of sulfur isotopes and selenium was measured between coexisting pyrite and chalcopyrite and between coexisting pyrrhotite and chalcopyrite from the Besshi deposit of Kieslager-type, Central Shikoku, Japan. In all the pyrite-chalcopyrite pairs studied, ³⁴S is enriched in pyrite relative to chalcopyrite, while selenium is enriched conversely in chalcopyrite relative to pyrite. The mean ³⁴S_py-cp value is +0.53±0.36 per mil, and the mean value of the distribution coefficient of selenium, D_cp-py, is 2.58±0.64. In all the pyrrhotite-chalcopyrite pairs studied, the two minerals are very close to each other both in sulfur isotope and Se/S ratios. The mean ³⁴S_po-cp value is –0.08±0.16 per mil and the mean D_cp-po value is 0.99±0.05. The results have been discussed in comparison with similar data obtained for the Hitachi deposits of Kieslager-type, Japan (Yamamoto et al. 1983).     

Raman spectra of methane hydrate up to 86 GPa

High-pressure Raman studies of methane hydrate were performed using a diamond anvil cell in the pressure range of 0.1–86 GPa at room temperature. Raman spectra of the methane molecules revealed that new softened intramolecular vibration mode of ν ₁ appeared at 17 GPa and that the splitting of vibration mode of ν ₃ occurred at 15 GPa. The appearance of these two modes indicates that an intermolecular attractive interaction increases between the methane molecules and the host water molecules and between the neighboring methane molecules. These interactions might result in the exceptional stability of a high-pressure structure, a filled ice Ih structure (FIIhS) for methane hydrate, up to 40 GPa. At 40 GPa, a clear change in the slope of the Raman shift versus pressure occurred, and above 40 GPa the Raman shift of the vibration modes increased monotonously up to 86 GPa. A previous XRD study showed that the FIIhS transformed into another new high-pressure structure at 40 GPa. The change in the Raman spectra at 40 GPa may be induced by the transition of the structure.     

Carbonate deposits on submerged seamounts in the northwestern Pacific Ocean

Abstract   The lithology of shallow-water carbonates collected from 19 sites on 16 seamounts in six areas of the northwestern Pacific Ocean using the Deep-sea Boring Machine System are described. The areas include the Amami Plateau, Daito Ridge, Oki-Daito Ridge, Urdaneta Plateau, Kyushu-Palau Ridge and Ogasawara Plateau. Chronological constraint is provided by calcareous nannofossil biostratigraphy, planktonic foraminiferal biostratigraphy, larger foraminiferal biostratigraphy and strontium (Sr) isotope stratigraphy. Large amounts of shallow-water carbonates accumulated on the seamounts during the Oligocene, a relatively cool period, whereas limited carbonate deposits formed during the Early Miocene, a relatively warm period. This might indicate that deposition of shallow-water carbonates on seamounts in the northwestern Pacific Ocean was not necessarily controlled by climatic conditions, but was related to volcanism and tectonics that served as foundations for reef/carbonate-platform formation. Remarkable differences in biotic composition exist between Cretaceous and Cenozoic shallow-water carbonates. Late Cretaceous shallow-water carbonates are distinguished by the occurrence of rudists, solenoporacean algae and microencrusters. Middle Eocene to Early Oligocene shallow-water carbonates are dominated by Halimeda or nummulitid and discocyclinid larger foraminifers. Scleractinian corals became common from the Oligocene onward. Nongeniculate coralline algae and larger foraminifers were common to abundant throughout the Eocene to the Pleistocene. The replacement of major carbonate producers in the shallow-water carbonate factory during post-Cretaceous time is in accordance with previous studies and is considered to reflect a shift in seawater chemistry.