DHI evaluation by combining rock physics simulation and statistical techniques for fluid identification of Cambrian-to-Cretaceous clastic reservoirs in Pakistan

The use of seismic direct hydrocarbon indicators is very common in exploration and reservoir development to minimise exploration risk and to optimise the location of production wells. DHIs can be enhanced using AVO methods to calculate seismic attributes that approximate relative elastic properties. In this study, we analyse the sensitivity to pore fluid changes of a range of elastic properties by combining rock physics studies and statistical techniques and determine which provide the best basis for DHIs. Gassmann fluid substitution is applied to the well log data and various elastic properties are evaluated by measuring the degree of separation that they achieve between gas sands and wet sands. The method has been applied successfully to well log data from proven reservoirs in three different siliciclastic environments of Cambrian, Jurassic, and Cretaceous ages. We have quantified the sensitivity of various elastic properties such as acoustic and extended elastic (EEI) impedances, elastic moduli (K _sat and K _sat–μ), lambda–mu–rho method (λρ and μρ), P-to-S-wave velocity ratio (V _P/V _S), and Poisson’s ratio (σ) at fully gas/water saturation scenarios. The results are strongly dependent on the local geological settings and our modeling demonstrates that for Cambrian and Cretaceous reservoirs, K _sat–μ, EEI, V _P/V _S, and σ are more sensitive to pore fluids (gas/water). For the Jurassic reservoir, the sensitivity of all elastic and seismic properties to pore fluid reduces due to high overburden pressure and the resultant low porosity. Fluid indicators are evaluated using two metrics: a fluid indicator coefficient based on a Gaussian model and an overlap coefficient which makes no assumptions about a distribution model. This study will provide a potential way to identify gas sand zones in future exploration.     

Basement structural architecture and hydrocarbon conduit potential of polygonal faults in the Cooper‐Eromanga Basin,Australia

A thorough and complete understanding of the structural geology and evolution of the Cooper‐Eromanga Basin has been hampered by low‐resolution seismic data that becomes particularly difficult to interpret below the thick Permian coal measures. As a result, researchers are tentative to interpret the basement fault architecture within the basin, which is largely undefined. To provide a better understanding of the basement fault geometry, all available two‐dimensional seismic lines together with 12 three‐dimensional seismic surveys were structurally interpreted with assistance from seismic attribute analysis. The Upper Cretaceous Cadna‐owie Formation and top Permian reflectors were analysed using a common seismic attribute technique (incoherency) that was used to infer the presence of faults that may have otherwise been overlooked. Detailed basement fault maps for each seismic survey were constructed and used in conjunction with two‐dimensional seismic data interpretation to produce a regional basement fault map. Large north‐northeast–south‐southwest‐striking sinistral strike–slip faults were identified within the Patchawarra Trough appearing to splay from the main northeast–southwest‐striking ridge. These sinistral north‐northeast–south‐southwest‐striking faults, together with field‐scale southeast–northwest‐striking dextral strike–slip faults, are optimally oriented to have potentially developed as a conjugated fault set under a south‐southeast–north‐northwest‐oriented strike–slip stress regime. Geomechanical modelling for a regionally extensive system of Cretaceous polygonal faults was performed to calculate the Leakage Factor and Dilation Tendency of individual faults. Faults that extend into Lower Cretaceous oil‐rich reservoirs with strikes of between 060°N and 140°N and a high to near‐vertical dip angle were identified to most likely be acting as conduits for the tertiary migration of hydrocarbons from known Lower Cretaceous hydrocarbon reservoirs into shallow Cretaceous sediments. This research provides valuable information on the regional basement fault architecture and a more detailed exploration target for the Cooper‐Eromanga Basin, which were previously not available in literature.     

Salinisation de l’aquifère libre de la Chaouia côtière (Azemmour-Tnine Chtouka), Maroc

L’aquifère libre de la Chaouia côtière constitue un exemple des aquifères les plus exploités au Maroc. Ce travail est consacré à l’étude des processus de la salinisation des eaux souterraines par l’analyse physico-chimique de 39 puits répartis dans la zone. Deux types de faciès ont été révélés, l’un est chloruré-sodique dans la frange côtière ; l’autre faciès est de type chloruré bicarbonaté-calcique caractérisant les eaux exploitées dans les calcaires marneux du Crétacé. L’influence marine (aérosols et intrusion marine), la dissolution/précipitation de la roche aquifère et l’infiltration des eaux d’irrigation, sont parmi les causes de l’augmentation de la salinité des eaux souterraines, en plus de l’exploitation excessive de l’eau souterraine.     

Electrical and electromagnetic surveys to locate possible causes of water seepage to ground surface at a quarry open pit near Helwan city,Egypt

Water seepage to ground surface at a limestone quarry located at Wadi Garawy about 20 km south-east of Helwan city in Egypt posed a real threat to the mining activity at the quarry. The quarry area is known to be very dry for decades and away from water utilities and infrastructures that may cause water leaks to the quarry. Geophysical investigation including 1D Vertical Electrical Sounding (VES), 2D Electrical Resistivity Tomography (ERT) and 1D Transient Electromagnetic (TEM) surveys were conducted to characterize the rock sequence and locate what could be a possible source of water seepage to the quarry. The resistivity profiles generated from the VES and TEM surveys mapped the rock units in the area down to depths exceeded 100 m. The ERT profiles acquired from the quarrying zone close to the water seepage spot have imaged the top of groundwater level at few meters below the ground surface at the quarry open pit. The spot of groundwater seepage seemed to occur at an area of limestone dissolution that were filled by finer sediments. The finer sediments acted as a hydrological conduit that allowed an upward seepage of groundwater to ground surface under the capillary action effect.     

The effectiveness of the very low frequency electromagnetic method (VLF-EM) in the exploration of sulphide mineralization in arid environments,case study from South Sinai Peninsula,Egypt

Very low frequency electromagnetic (VLF-EM) measurements were carried out in Wadi Isbayia area, south Sinai Peninsula, to test the efficiency of the VLF-EM method in the exploration of sulphide mineralization in arid environments. The VLF-EM field measurements, including tilt angle, real and imaginary components of the received VLF field, were carried out along fifteen profiles covering a quartz monzonite bedrock. Interpretation of the VLF measurements, in the light of geological information, has showed that sulphide minerals in the Wadi Isbayia area extend from the ground surface to a depth of about 200 m. However, the structural lineaments, especially faults, have controlled the distribution of the sulphide mineralization. A few of polished sections for rock samples, collected from the sites of the VLF-EM anomalies in the study area, have been prepared and examined by ore microscopy which confirmed the presence of pyrite and chalcopyrite as well as iron oxides, disseminated in the quartz monzonite bedrock. These results showed that the VLF-EM method is an effective tool in the exploration of sulphide minerals in the arid environments.     

Statistical landslide susceptibility assessment of the Mansehra and Torghar districts,Khyber Pakhtunkhwa Province,Pakistan

This paper presents laboratory experiments and numerical simulations of effects of submerged obstacles on tsunami-like solitary wave and its run-up. This study was carried out for the breaking and non-breaking solitary waves on 1:19.85 uniform slope which contains a submerged obstacle. New laboratory experiments are performed to describe the mitigation of tsunami amplitude and run-up under the effect of submerged obstacles. We are based on experimental results obtained to validate the numerical model. The numerical modeling using COULWAVE aims essentially to show the effect of the obstacle on the shape of solitary wave and the limit of this effect. Using a multiple nonlinear regression, we have determined a model to estimate height of run-up according to the amplitude of the wave and the obstacle peak depth.     

利用瞬变电磁和多频电磁方法监测地下水位及其对Hawara遗址的影响

利用瞬变电磁（TEM）和地面电磁（GEM）方法,本文研究了埃及Hawara遗址区的地下水对遗址的影响.这个遗址包括Hawara金字塔、北区墓地、以及被称作“迷宫”的南区墓葬场所.现今Hawara遗址已经完全荒废,被耕作区和Bahr Wahba运河包围.地表水和地下水会破坏Hawara金字塔和“迷宫”遗址的地基,现在金字塔入口已被淹没至地面下约6 m深处.本文在耕作区、金字塔以及“迷宫”等三个地区进行了TEM勘察;在“迷宫”地区进行了GEM勘察.综合分析以上两种勘察数据,我们发现,农业灌溉是浸入到地下的水的主要来源;本地区地下水位随着观测点及海拔的不同,在地面以下2~7 m之间变化.     

Exploitation of TerraSAR-X Data for Land use/Land Cover Analysis Using Object-Oriented Classification Approach in the African Sahel Area, Sudan

Recently, object-oriented classification techniques based on image segmentation approaches are being studied using high-resolution satellite images to extract various thematic information. In this study different types of land use/land cover (LULC) types were analysed by employing object-oriented classification approach to dual TerraSAR-X images (HH and HV polarisation) at African Sahel. For that purpose, multi-resolution segmentation (MRS) of the Definiens software was used for creating the image objects. Using the feature space optimisation (FSO) tool the attributes of the TerraSAR-X image were optimised in order to obtain the best separability among classes for the LULC mapping. The backscattering coefficients (BSC) for some classes were observed to be different for HH and HV polarisations. The best separation distance of the tested spectral, shape and textural features showed different variations among the discriminated LULC classes. An overall accuracy of 84 % with a kappa value 0.82 was resulted from the classification scheme, while accuracy differences among the classes were kept minimal. Finally, the results highlighted the importance of a combine use of TerraSAR-X data and object-oriented classification approaches as a useful source of information and technique for LULC analysis in the African Sahel drylands.     

Paleostress reconstructions of Jabal Hafit structures,Southeast of Al Ain City,United Arab Emirates (UAE)

This paper presents the first paleostress results obtained from displacement and fracture systems within the Lower Eocene sediments at Jabal Hafit, Abu Dhabi Emirate, UAE. Detailed investigation of Paleogene structures at Jabal Hafit reveal the existence of both extensional structures (normal faults) and compressional structures (strike-slip and reverse faults). Structural analysis and paleostress reconstructions show that the Paleogene kinematic history is characterized by the succession of four paleostress stages. Orientation of principal stresses was found from fault-slip data using an improved right-dihedra method, followed by rotational optimisation (TENSOR program).The paleostress results confirm four transtensional tectonic stages (T1–T4) which affected the study area. The first tectonic stage (T1) is characterized by S_Hmax NW–SE σ₂-orientation. This stage produced NW–SE striking joints (tension veins) and E–W to ENE–WSW striking dextral strike-slip faults. The proposed age of this stage is Early Eocene. The second stage (T2) had S_Hmax N–S σ₂-orientation. N–S striking joints and NNE–SSW striking sinistral strike-slip faults, E–W striking reverse faults and N–S striking normal faults were created during this stage. The T2 stage is interpreted to be post-Early Eocene in age. The third stage (T3) is characterized by S_Hmax E–W σ₂-orientation. This stage reactivated the E–W reverse faults as sinistral strike-slip faults and created E–W striking joints and NE–SW reverse faults. The proposed age for T3 is post-Middle Eocene. During the T3 (S_Hmax E–W σ₂-orientation) stage the NNW-plunging Hafit anticline was formed. The last tectonic stage that affected the study area (T4) is characterized by S_Hmax NE–SW σ₂-orientation. During this stage, the ENE–WSW faults were reactivated as sinistral strike-slip and reverse faults. NE–SW oriented joints were also created during the T4 (S_Hmax NE–SW σ₂-orientation) stage. The interpreted age of this stage is post-Middle Miocene time but younger than T3 (S_Hmax E–W σ₂-orientation) stage.     

High-resolution facies and porosity models of the upper Jurassic Arab-D carbonate reservoir using an outcrop analogue, central Saudi Arabia

Subsurface models of hydrocarbon reservoirs are coarse and of low resolution when compared with the actual geologic characteristics. Therefore, the understanding of the three-dimensional architecture of reservoir units is often incomplete. Outcrop analogues are commonly used to understand the spatial continuity of reservoir units. In this study, a Late Jurassic outcrop analogue for the Arab-D reservoir of central Saudi Arabia was used to build a high-resolution model that captures fine geologic details. Subsurface reservoir lithofacies were matched with those from the studied outcrop, and porosity values derived from published core and well log data from the Ain Dar, Uthmanyah, and Shudgum areas of the Ghawar Field, eastern Saudi Arabia, were then applied to the equivalent lithofacies in the outcrop. Maximum, minimum, and average subsurface porosity for each lithofacies were distributed in the facies model using a geostatistical algorithm to produce nine porosity models for the field data. Several realisations were run to visualise the variability in each model and to quantitatively measure the uncertainty associated with the models. The results indicated that potential reservoir zones were associated with grainstone, packstone, and some wackestone layers. Semivariogram analysis of the lithofacies showed good continuity in the N-S direction and less continuity in the E-W direction. The high-resolution lithofacies models detected permeability barriers and isolated low porosity bodies within the potential reservoir zones. This model revealed the porosity distribution in areas smaller than one cell in the subsurface model and highlighted the uncertainty associated with several aspects of the model.