Effect of Sliding Rate on the Activity of Acoustic Emission During Stable Sliding

--The mechanical and statistical characteristics of acoustic emission (AE) events during stable sliding are investigated through a laboratory experiment using a granite specimen with a pre-cut fault. Numerous AE events are found to be generated on the pre-cut fault, indicating that microscopically unstable fracture occurs during macroscopically stable sliding. The composite focal mechanism solution of AE events is determined from the first motion directions of P-waves. The determined mechanism is consistent with the double-couple one expected for the slip on the pre-cut fault. The source radii of large AE events are estimated to be about 10 mm from the widths of the first P-wave pulses. These indicate that the AE events are generated by shear fracture whose faulting area is a part of the pre-cut fault plane. The occurrence of AE events as a stochastic process approximately obeys the Poisson process, if the effect of mutually dependent events consti tuting clusters is corrected. The observed amplitude-frequency relation of AE events approximately follows a power law for a limited amplitude range. As the macroscopic sliding rate increases, the number of AE events per unit sliding distance decreases. This rate dependence of the AE activity is qualitatively consistent with the observation that the real area of contact between sliding surfaces decreases with an increase in the sliding rate as reported in the literature.     

Distribution of vertical crustal movement rates in the Tohoku district, Japan, predicted by least-squares collocation

Least-squares prediction using an empirically deduced local covariance function was performed to investigate the temporal change in the rates of vertical crustal movements in the Tohoku district, Japan. Levelling data covering an area of approximately 450 × 275 km² observed between 1966 and 1995 were used and the results shown in the form of contour maps. Firstly we derived a covariance function of the rates of vertical crustal movement with a Gaussian form function. We used this function to estimate the spatial distribution of the rates of vertical crustal movements. By the present method, a steady tilt of the Tohoku district to the east, toward the Japan Trench and an areal uplift in the southwestern part were well reproduced. Moreover, a significant temporal change in vertical movement rates is clearly seen. Received: 15 July 1996      

Rare Earth, Major and Trace Elements in the Kunimiyama Ferromanganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan

Abstract. Rare earth, major and trace element geochemistry is reported for the Kunimiyama stratiform ferromanganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The deposit immediately overlies greenstones of mid-ocean ridge basalt (MORB) origin and underlies red chert. The ferromanganese ores exhibit remarkable enrichments in Fe, Mn, P, V, Co, Ni, Zn, Y and rare earth elements (excepting Ce) relative to continental crustal abundance. These enriched elements/ Fe ratios and Post-Archean Average Australian Shale-normalized REE patterns of the ferromanganese ores are generally analogous to those of modern hydrothermal ferromanganese plume fall-out precipitates deposited on MOR flanks. However in more detail, Mn and Ti enrichments in the ferromanganese ores are more striking than the modern counterpart, suggesting a significant contribution of hydrogenetic component in the Kunimiyama ores. Our results are consistent with the interpretation that the Kunimiyama ores were umber deposits that primarily formed by hydrothermal plume fall-out precipitation in the Panthalassa Ocean during the Early Permian and then accreted onto the proto-Japanese island arc during the Middle Jurassic. The presence of strong negative Ce anomaly in the Kunimiyama ores may indicate that the Early Permian Panthalassa seawater had a more striking negative Ce anomaly due to a more oxidizing oceanic condition than today.     

Pressure and temperature dependence of cation distribution in Mg-Mn olivine

Synthetic (Mg_0.51, Mn_0.49)₂SiO₄ olivine samples are heat-treated at three different pressures; 0, 8 and 12 GPa, all at the same temperature (～500° C). X-ray structure analyses on these single crystals are made in order to see the pressure effect on cation distribution. The intersite distribution coefficient of Mg and Mn in M1 and M2 sites, K _D = (Mn/Mg) _M1/(Mn/Mg) _M2, of these samples are 0.192 (0 GPa), 0.246 (8 GPa) and 0.281 (12 GPa), indicating cationic disordering with pressure. The small differences of cell dimensions between these samples are determined by powder X-ray diffraction. Cell dimensions b and c decrease, whereas a increases with pressure of equilibration. Cell volume decreases with pressure as a result of a large contraction of the b cell dimension. The effect of pressure on the free energy of the cation exchange reaction is evaluated by the observed relation between the cell volume and the site occupancy numbers. The magnitude of the pressure effect on cation distribution is only a fifth of that predicted from the observed change in volume combined with thermodynamic theory. This phenomenon is attributed to nonideality in this solid solution, and nonideal parameters are required to describe cation distribution determined in the present and previous experiments. We use a five-parameter equation to specify the cationic equilibrium on the basic of thermodynamic theory. It includes one energy parameter of ideal mixing, two parameters for nonideal effects, one volume parameter, and one thermal parameter originated from the lattice vibrational energy. The present data combined with some of the existing data are used to determine the five parameters, and the cation distribution in Mg-Mn olivine is described as a function of temperature, pressure, and composition. The basic framework of describing the cationic behavior in olivine-type mineral is worked out, although the result is preliminary: each of the determined parameters is not accurate enough to enable us to make a reliable prediction.     

High time resolution monitoring of tropospheric temperature with a Radio Acoustic Sounding System (RASS)

We have observed the time-height variation of the temperature field in the upper troposphere using a Radio Acoustic Sounding System (RASS) which consists of the MU radar and a high-power acoustic transmitter. The fast beam steerability of the MU radar has made it possible to measure temperature profiles in a fairly wide height range in the upper troposphere (5–11 km), even under intense wind conditions. Observations were continued for about 32 hr on 24–26 December, 1986 with a time-height resolution of 30 min and 150 m. During the observation period, the tropospheric jet was so intense that the acoustic wavefronts were severely distorted. Using wind velocity profiles observed by the MU radar we have numerically estimated the propagation of acoustic wavefronts, and further determined favorable pointing directions for the MU radar to receive significant backscattering from refractive index fluctuations produced by the acoustic waves. Conventional radiosonde soundings were carried out every 6 hr, which showed a temperature decrease of 4 K/day in the upper troposphere during the observation period. Temperature profiles taken by RASS agree well with the radiosonde results.     

Melting relationships in the system Fe-Feo at high pressures: Implications for the composition and formation of the earth's core

A reconnaissance investigation has been carried out on melting relationships in the system Fe-FeO at pressures up to 25 GPa and temperatures up to 2200° C using an MA-8 apparatus. Limited studies were also made of the Co-CoO and Ni-NiO systems. In the system FeFeO, the rapid exsolution of FeO from liquids during quenching causes some difficulties in interpretation of textures and phase relationships. The Co-CoO and Ni-NiO systems are more tractable experimentally and provide useful analogues to the Fe-FeO system. It was found that the broad field of liquid immiscibility present at ambient pressure in the Co-CoO system had disappeared at 18 GPa, 2200° C and that the system displayed complete miscibility between molten Co and CoO, analogous to the behaviour of the Ni-NiO system at ambient pressure. The phase diagram of the system Fe-FeO at 16 GPa and from 1600–2200° C was constructed from interpretations based on the textures of quenched run products. The solubility of FeO in molten iron is considerably enhanced by high pressures. At 16 GPa, the Fe-FeO eutectic contains about 10–15 mol percent FeO and the eutectic temperature in this iron-rich region of the system occurs at 1700±25° C, some 350° C below the melting point of pure iron at the same pressure. The solubility of FeO in molten Fe increases rapidly as temperature increases from 1700 to 2200° C. A relatively small liquid immiscibility field is present above 1900° C but is believed to be eliminated above 2200° C. This inference is supported by thermodynamic calculations on the positions of key phase boundaries. A single run carried out on an Fe₅₀ FeO₅₀ composition at 25 GPa and 2200° C demonstrated extensive and probably complete miscibility between Fe and FeO liquids under these conditions. The melting point of iron is decreased considerably by solution of FeO at high pressures; moreover, the melting point gradient (dP/dT) of the Fe-FeO eutectic is much smaller than that of pure iron and is also smaller than that of mantle pyrolite under the P, T conditions studied. These characteristics make it possible for melting of metal phase and segregation of the core to proceed within the Earth under conditions where most of the mantle remains below solidus temperatures. Under these conditions, the core would inevitably contain a large proportion of dissolved FeO. It is concluded therefore, that oxygen is likely to be the principal light element in the core. The inner core may not be composed of pure iron, as often proposed. Instead, it may consist of a crystalline oxide solid solution (Ni, Fe)₂O.     

Geomorphological study on a clastic accretionary prism: The Nankai Trough

Abstract The Nankai Trough, off southwest Japan, is one of the best sites for the study of geomorphic characteristics of a clastic accretionary prism. A recent multibeam survey over the central and eastern parts of the Nankai accretionary prism has revealed a large variation of the topography along the trough axis. Analysis of the bathymetric data suggests the existence of prism deformational features of different scales, such as depressions, embayment structures and cusps. These structures are the results of slope instability caused by basement relief of subducted oceanic plate. Unstable slopes recover by new accretion and development of a low angle thrust. Small-scale deformation due to the subduction of a small isolated seamount is then adjusted to the regional trend. By contrast, a 30 km indentation of the wedge observed in the eastern part of the Nankai Trough, the Tenryu Cusp, has seemed to retain its geometry. The subducted Philippine Sea plate has deformed greatly near the eastern end of the Nankai Trough, because of the collision between the Izu-Ogasawara (Bonin) arc and central Japan. Therefore, the indentation may be the result of the continuous subduction of a basement high, such as the Zenisu Ridge, which has been formed under north-south compression due to the arc-arc collision.     

High-angle reverse faulting associated with the 1946 Nankaido earthquake

Analysis of vertical crustal deformation data in the southwestern part of Shikoku, southwest Japan, suggests that the Nankaido earthquake of 1946 (M_w = 8.1), which is a principal interplate thrust earthquake, was accompanied by subsidiary faulting on a splay fault adjacent to the coast of Shikoku. Discarding crustal movement resulting from the main thrusting of the Nankaido earthquake, local leveling data are explained by slip on a simple rectangular thrust fault located just offshore of Shikoku. Although it is difficult to constrain the fault location, a possible result is a high-angle thrust dipping landward at an angle of about 70°, with a dislocation of about 1.5 m, and source dimensions of 30 × 13 km along strike and dip. respectively. This result indicates that the fault may be one of the steeply dipping subsidiary faults branching from the main low-angle thrust, as was the case in the Alaska earthquake of 1964. Although several lines of evidence suggest that this faulting occurred as slow aseismic slip, its discrimination from the main seismic event is extremely difficult. This kind of high-angle thrusting just offshore of the coast would play an important role for the formation of the marine terraces during the late Quaternary period.