Abundance of deep-sea meiobenthos off Sanriku,Northeastern Japan

Abundance of deep-sea meiobenthos off Sanriku, Northeastern Japan was studied quantitatively using sediment samples collected by box corers or an Okean grab. Sampling stations were established along a line transect which covered areas from off the mouth of Otsuchi Bay to the abyssal plain of the western Pacific crossing over the Japan Trench (water depths from 120 m to 7460 m). Abundance of meiobenthos decreased linearly with water depth down to 1503 m and became constant at stations deeper than 4130 m. Nematodes predominated over the other taxonomic groups at all stations. An equation to estimate meiofaunal abundance from several sediment characteristics, which was previously proposed by the first author based on data from tropical and subtropical regions of the western Pacific, was applied to the present boreal area. At one station where the Okean grab was used, the estimated value was 4.7 times more than the observed one. Except for the station, however, observed values fell within the confident range of estimated values. The estimated values were always higher than the observed ones at boxcorer stations, whereasvice versa at Okean-grab stations. These results suggested that keen attention is necessary in selecting sampling gear for ecological studies of deep-sea meiobenthos.     

Particulate organic carbon supply to the sea bottom: stable carbon isotope ratio analysis of the sediment trap samples at the mouth of otsuchi bay,Northeastern Japan

An array of sediment traps was deployed for the analysis of the pattern of particulate organic carbon (POC) supply to the sea bottom in April, May and July 1988 at the mouth of Otsuchi Bay (about 80 m depth), Northeastern Japan.On the basis of a simple two-component mixing model using stable carbon isotope ratios, the POC flux was separated into marine planktonic and terrestrial components. Both the planktonic and terrestrial POC fluxes had maximum values at 30 m above the sea bottom throughout the three experiments. The planktonic POC flux showed a significant decrease with depth between 30 m and 10 m or 5 m above the bottom. Vertical supply of the planktonic POC and supply of the resuspended planktonic POC were estimated on the basis of regression lines between water depth and the planktonic POC flux in the depth range where the flux decreases with depth.Vertical supply of the planktonic POC and supply of the resuspended planktonic POC to the sea bottom were largest in May (52.1 mgC m^–2 d^–1 and 19.5 mgC m^–2 d^–1 at 5 m above the sea bottom), and horizontal supplies of the terrestrial POC were almost constant (31.9±3.5 mgC m^–2 d^–1 at 5 m above the bottom) throughout the three experiments.     

Transmission and reflection of the Rossby waves in a stratified ocean with bottom topography

Transmission and reflection coefficients are calculated for Rossby waves incident on a bottom topography with constant slope in a continuously stratified ocean. The characteristics of the coefficients are interpreted in terms of the quasigeostrophic waves on the slope. In the parameter range where only the barotropic Rossby waves can propagate in the region outside the slope, the bottom trapped wave plays the same role as the topographic Rossby wave in a homogeneous ocean, and hence the transmission is weak unless phase matching takes place. When both of the barotropic and baroclinic Rossby waves can propagate outside the slope, the total transmission can be strong. The bottom trapped wave affects the transmission and reflection, and it leads to the possibility that the Rossby wave is transmitted as a mode different from the incident mode. When the number of the wavy modes on the slope is smaller than that of the Rossby wave modes outside the slope, strong reflection occurs.The results for an ocean with linear distribution of the squared Brunt-Väisälä frequency are compared to those in a uniformly stratified ocean. The weakening of the stratification near the bottom is almost equivalent to reducing the effect of the slope.     

Compressibility of the calcium aluminosilicate, CAS, phase to 44 GPa

In situ X-ray diffraction measurements on a calcium aluminosilicate (CAS) phase have been carried out using a laser-heated diamond anvil cell up to a pressure of 44 GPa, employing a synchrotron radiation source. CAS is the major mineral formed from sediments subducted into the Earth's mantle. The sample was heated using a YAG laser after each pressure increment to relax the deviatoric stress in the sample. X-ray diffraction measurements were carried out at T = 300 K using an angle-dispersive technique. The pressure was calculated using an internal platinum metal pressure calibrant. The Birch–Murnaghan equation of state for the CAS phase obtained from the experimental unit cell parameters showed a density of ρ₀ = 3.888 g/cm³ and a bulk modulus of K₀ = 229 ± 9 GPa for K^′₀ = 4.7 ± 0.7. When the first pressure derivative of the bulk modulus was fixed at K^′₀ = 4, then the value of K₀ = 239 ± 2 GPa. From the experimental compressibility, the density of the CAS phase was observed to be lower than the density of co-existing Al-bearing stishovite, calcium perovskite, calcium ferrite-type phases, and (Fe,Al)-bearing Mg-perovskite in subducted sediments in the lower mantle. Therefore, the density of subducted sediments in the lower mantle decreases with increasing mineral proportion of the CAS phase.     

Discriminating residual and colluvial soils using topographic analysis in a small,forested catchment in Japan

Soil moisture plays an important role in hydrology. Understanding factors (such as topography, vegetation, and meteorological conditions) that influence spatio‐temporal variability in soil moisture, and how this influence is manifested, is important for understanding hydrological processes. A number of distributed (quasi‐)physical hydrological models have been developed to investigate this subject. Previous studies have shown that the spatial differences in the distribution of soil types (residual and colluvial soils) dominantly reflect spatio‐temporal fluctuations in soil moisture and runoff. We present a methodology for assessing the spatial distribution of residual and colluvial soils, which differ with respect to their physical characteristics, in a 0·88 km² forested catchment with complex topography and a complex land‐use history. Our method is based on penetration resistance profile data; in this data set, each data point represents soil physical characteristics within an area of about 25 m². If the spatial distribution of soils under similar meteorological, geological, historical land use, and other conditions could be characterized on the basis of similarity in topographic features, then the spatial distribution of soil could be predicted based on relationships between various topographic indices (e.g. topographic index and local slope). We tested whether our model correctly assessed the reference data. The model's results were 90·5% correct for residual soils and 87·3% correct for colluvial soils. Further studies will quantify the relationships between topographic features of land covered by residual and colluvial soils and changes in spatio‐temporal variations in the catchment (e.g. vegetation and land use) as a function of geology or meteorology. Copyright © 2007 John Wiley & Sons, Ltd.     

A new high-pressure phase of strontium carbonate

High-pressure and high-temperature experiments conducted in a laser-heated diamond-anvil cell with a synchrotron X-ray diffraction method have revealed a phase transformation in the aragonite-type SrCO₃ at pressures above 10 GPa. The new phase has an orthorhombic symmetry and was confirmed to remain stable to 32 GPa. The Birch-Murnaghan equation of state for new phase was determined from the experimental unit cell parameters, with K₀ = 101 (± 16) GPa, K₀ = 4 (constrained value), and V₀ = 111.9 (± 2.2). This transformation in SrCO₃ is different from that in BaCO₃ as reported in previous studies. After decompression at ambient pressure, the high-pressure phase transforms to a metastable structure, which has an orthorhombic symmetry. This result should also resolve a dispute regarding the stable high-pressure phases in BaCO₃, which is an analog material of CaCO₃ and SrCO₃.This revised version was published in February 2005 with corrections to the Introduction and to the References.     

High-pressure phase transformations of FeS: Novel phases at conditions of planetary cores

Iron sulfide (FeS) was investigated using first-principles calculations up to a pressure of 400 GPa. A number of new phase transitions were found. An antiferromagnetic MnP-type structure, FeS II, was confirmed to be stable at low pressures, whereas at high pressures (40–135 GPa) we find a new stable phase, with a non-magnetic MnP-type structure, FeS VI. The observed first-order change in the cell shape between the two phases can be explained by the difference in magnetic configurations. The calculated cell parameters, atomic coordinates, and bulk modulus of non-magnetic MnP-type phase are consistent with those determined from experiment. The upper pressure limit of the stability of the non-magnetic MnP-type phase was calculated to be 135 GPa. A hitherto unsuspected phase transition from the non-magnetic MnP-type to a phase with Pmmn symmetry, FeS VII, was identified using the evolutionary crystal structure prediction (USPEX) method. The structure of the Pmmn phase has no known analogues, but can be described as a distortion of the NaCl-type structure. The Pmmn phase with the distorted NaCl-type structure is stable from 135 GPa at least up to 400 GPa. According to previous experiments and the present study, the transition sequence of FeS at low temperatures is as follows: troilite ➔ antiferromagnetic MnP-type phase ➔ monoclinic phase ➔ non-magnetic MnP-type phase ➔ Pmmn phase. The calculated volume reduction from the monoclinic to the non-magnetic MnP-type phase is 1.0% at 40 GPa, which is in good agreement with experimental observations. The calculated volume reduction from the non-magnetic MnP-type to the Pmmn phase is 3.7% at 135 GPa.     

Analyses of age and population genetic structure of the broadbanded thornyhead Sebastolobus macrochir in North Japan suggest its broad dispersion and migration before settlement

Body size, age, and population genetic structure of the broadbanded thornyhead Sebastolobus macrochir inhabiting areas off the Pacific coast of Tohoku and off Abashiri, the Sea of Okhotsk, Japan, were analyzed. On the basis of significant differences in body size (growth) between certain year classes at Tohoku and Abashiri, it appears that S. macrochir does not migrate extensively after settlement and subsists on food within the settled environment. Meanwhile, no genetic isolation was observed between the populations at these two sites. Thus, it is highly likely that its pelagic egg balloons, larvae, and juveniles widely disperse and migrate before settlement.     

Biomass and production of bacterioplankton at the hydrothermal vent areas in the rift system of the North Fiji Basin

Mesoscale distribution of the density and productivity of bacterioplankton at representative geological locations in the rift ecosystem of the North Fiji Basin were clarified by sampling using a mannedShinkai 6500 submersible. The bacterioplankton density inside the hot and warm fluids of hydrothermal vents was one order magnitude greater than that in the deep water outside the vent plume. The bacterial production was highest inside the hot and warm vent fluids, and was higher just outside the hot and warm vent fluids than further outside in the deep water surrounding the vent plume, respectively. Productivity from outside to inside the vent fluid varied from 0.01 to 0.71 gC m^–3 day^–1.