Saturn's satellites: Nuar-infrared spectrophotometry (0.6–2.5 μm) of the leading and trailing sides and compositional implications

Near-infrared spectra, 0.65–2.5 μm, are presented for Tethys, Dione, Rhea, Iapetus, and Hyperion. Water ice absorptions at 2.0, 1.5, and 1.25 μm are seen in the spectra of all five objects (except the 1.25-μm band was not detected in spectra of Hyperion) and the weak 1.04-μm ice absorption is detected on the leading and trailing sides of Rhea, and the trailing side of Dione. Upper limits to the 1.04-μm ice band depth are <0.3% for the leading side of Dione; <0.7% for the leading side of Iapetus, and the trailing side of Tethys; <1% on the trailing side of Iapetus; and <5% on the leading side of Tethys. The leading-trailing side ice band depth differences on Saturn's satellites are similar to those for the Galilean satellites, indicating possible surface modification by magnetospheric charged particle bombardment. Limits are determined for the amount of particulates, trapped gases, and amonium hydroxide on the surface. The surfaces of Saturn's satellites (except the dark side of Iapetus) are nearly pure water ice, with probably less than about 1 wt% particulate minerals. The ice could be clathrates with as much as a few weight percent trapped gases. The upper limit of amonium hydroxide depends on the spectral data precision and varies from ～ 1 wt% NH₃ for the leading side of Rhea to ～ 10 wt% NH₃ for Dione.     

An environmental assessment of the Charleston Ocean Dredged Material Disposal Site and surrounding areas after partial completion of the Charleston Harbor Deepening Project

A project to deepen shipping and entrance channels in Charleston Harbor was conducted from 1999 to 2002. This generated approximately 22 million cubic yards of sediment for offshore disposal. Assessments of biological and physical conditions in the Charleston Ocean Dredged Material Disposal Site and surrounding areas were conducted prior to deepening (1993-94), and partway through the disposal period (2000). Results from the 2000 survey are presented and compared to the baseline survey. The study area was composed of the disposal zone and surrounding areas and divided into 20 one square mile strata. Within each stratum, benthic grab samples were collected from ten random sites for analysis of sediment composition and contaminants and macrobenthic assemblages. No contaminant levels were above effects range low levels. Results revealed that sediments in the western strata had significantly higher silt/clay content in the 2000 survey when compared to baseline sediments, while sediments east of the disposal zone were similar to baseline. Analyses were performed on a subset of the benthic data that compared baseline to 2000 conditions in western and eastern strata. The benthic communities in western strata were altered following disposal operations. The benthic community east of the disposal area was not different from baseline conditions. These alterations in the benthic community were attributed to changes in bottom habitat characteristics rather than pollution effects.     

An overview of toxicant identification in sediments and dredged materials

The identification of toxicants affecting aquatic benthic systems is critical to sound assessment and management of our nation's waterways. Identification of toxicants can be useful in designing effective sediment remediation plans and reasonable options for sediment disposal. Knowledge of which contaminants affect benthic systems allows managers to link pollution to specific dischargers and prevent further release of toxicant(s). In addition, identification of major causes of toxicity in sediments may guide programs such as those developing environmental sediment guidelines and registering pesticides, while knowledge of the causes of toxicity which drive ecological changes such as shifts in benthic community structure would be useful in performing ecological risk assessments. To this end, the US Environmental Protection Agency has developed tools (toxicity identification and evaluation (TIE) methods) that allow investigators to characterize and identify chemicals causing acute toxicity in sediments and dredged materials. To date, most sediment TIEs have been performed on interstitial waters. Preliminary evidence from the use of interstitial water TIEs reveals certain patterns in causes of sediment toxicity. First, among all sediments tested, there is no one predominant cause of toxicity; metals, organics, and ammonia play approximately equal roles in causing toxicity. Second, within a single sediment there are multiple causes of toxicity detected; not just one chemical class is active. Third, the role of ammonia is very prominent in these interstitial waters. Finally, if sediments are divided into marine or freshwater, TIEs perforMed on interstitial waters from freshwater sediments indicate a variety of toxicants in fairly equal proportions, while TIEs performed on interstitial waters from marine sediments have identified only ammonia and organics as toxicants, with metals playing a minor role. Preliminary evidence from whole sediment TIEs indicates that organic compounds play a major role in the toxicity of marine sediments, with almost no evidence for either metal or ammonia toxicity. However, interpretation of these results may be skewed because only a small number of interstitial water (n = 13) and whole sediment (n = 5) TIEs have been completed. These trends may change as more data are collected.     

Predation on the rocky shores of Patagonia,Argentina

Rocky intertidal communities of Argentinean Patagonia are exposed to harsh physical conditions caused by dry, strong southern trade winds (mean speed 45 km h^-1, gusts up to 140 km h^-1) that result in intense desiccation of intertidal organisms. Predator distributions in these communities were evaluated from April 2003 to December 2004 at two exposed headlands and six protected bays in Cabo dos Bahias (44°50′S, 65°40′W). Crabs and sea stars dominated the predator assemblage, with occasional scavenger snails and fish also present. During low tide, predators were never found in the open but were always associated with shelter (primarily within mussel beds and coralline algae), suggesting a strong predator dependency on foundation species to buffer them from physical stress. Few predators (mostly crabs) emerged from shelter at high tide. Unlike the larger predators found on Chilean rocky shores, invertebrate predators in this system are diminutive, generally < 2 cm. The lone exception was the newly discovered invasive green crab,Carcinus mamas. Feeding trials, gut content analyses, and visual surveys indicated that native predators feed primarily on small, soft-bodied prey.C. mamas fed on slow-moving and sessile animals, including the super abundant musselPerumytilus purpuratus, with much greater voracity than native predators. Because native intertidal organisms are dependent on mussel beds and coralline algae for shelter from desiccation, successful invasion ofC. mamas may lead to a significant decrease in native diversity by consuming foundation species. This study represents a preliminary survey of predator distributions and feeding habits on the rocky shores of Argentinean Patagonia and provides important baseline data to evaluate trophic linkages and predatory effects on Patagonian rocky shores.     

The socioeconomic impacts of nuclear generating stations: An analysis of the Rancho Seco and peach bottom facilities

This paper presents the results of a comparative analysis of the socioeconomic impacts of the construction and operation of two nuclear generating stations. Although the construction of nuclear power plants is typically a multiyear process utilizing large numbers of workers and requiring large expenditures for equipment and materials, the socioeconomic changes in the areas in which the plants are located were small and temporary. The extent and size of the changes were found to be related to the size of the work force residing in the local area, the magnitude of local utility and contractor purchases, the amount of tax payments resulting from the plant, and the level of involvement of area groups over plant-related issues.     

The lower crust beneath cratonic north-east Europe: isotopic constraints from garnet granulite xenoliths

Lower crustal garnet-bearing mafic granulite xenoliths from beneath the cratonic areas of NE Europe (NW Russia, Belarus, Finland) have unradiogenic ¹⁴³Nd/¹⁴⁴Nd ratios that differ strongly from those of xenoliths from beneath Phanerozoic regions of the European plate and worldwide, but closely resemble xenoliths from other cratonic regions of the world. Phanerozoic lower crustal xenoliths worldwide also show a very limited range of Pb isotope compositions whereas most cratonic lower crustal xenoliths have more varied but usually unradiogenic Pb isotope compositions, plotting to the left of the Geochron. However, many of the xenoliths from beneath NE Europe plot on the right-hand side of the Geochron and also have more radiogenic ²⁰⁸Pb/²⁰⁴Pb ratios. Thus, the lower crust of NE Europe shows characteristics of both cratonic lower crust (unradiogenic Nd isotopes) and Phanerozoic lower crust (radiogenic Pb isotopes). Its present-day low U/Pb and Th/Pb ratios indicate that it has been depleted in heat-producing elements, but the radiogenic Pb isotope ratios show that this depletion occurred relatively recently.     

Inverse problem in hydrogeology

The state of the groundwater inverse problem is synthesized. Emphasis is placed on aquifer characterization, where modelers have to deal with conceptual model uncertainty (notably spatial and temporal variability), scale dependence, many types of unknown parameters (transmissivity, recharge, boundary conditions, etc.), nonlinearity, and often low sensitivity of state variables (typically heads and concentrations) to aquifer properties. Because of these difficulties, calibration cannot be separated from the modeling process, as it is sometimes done in other fields. Instead, it should be viewed as one step in the process of understanding aquifer behavior. In fact, it is shown that actual parameter estimation methods do not differ from each other in the essence, though they may differ in the computational details. It is argued that there is ample room for improvement in groundwater inversion: development of user-friendly codes, accommodation of variability through geostatistics, incorporation of geological information and different types of data (temperature, occurrence and concentration of isotopes, age, etc.), proper accounting of uncertainty, etc. Despite this, even with existing codes, automatic calibration facilitates enormously the task of modeling. Therefore, it is contended that its use should become standard practice.

---

Resumen Se sintetiza el estado del problema inverso en aguas subterráneas. El énfasis se ubica en la caracterización de acuíferos, donde los modeladores tienen que enfrentar la incertidumbre del modelo conceptual (principalmente variabilidad temporal y espacial), dependencia de escala, muchos tipos de parámetros desconocidos (transmisividad, recarga, condiciones limitantes, etc), no linealidad, y frecuentemente baja sensibilidad de variables de estado (típicamente presiones y concentraciones) a las propiedades del acuífero. Debido a estas dificultades, no puede separarse la calibración de los procesos de modelado, como frecuentemente se hace en otros campos. En su lugar, debe de visualizarse como un paso en el proceso de entendimiento del comportamiento del acuífero. En realidad, se muestra que los métodos reales de estimación de parámetros no difieren uno del otro en lo esencial, aunque sí pueden diferir en los detalles computacionales. Se discute que existe amplio espacio para la mejora del problema inverso en aguas subterráneas: desarrollo de códigos amigables al usuario, acomodamiento de variabilidad a través de geoestadística, incorporación de información geológica y diferentes tipos de datos (temperatura, presencia y concentración de isótopos, edad, etc), explicación apropiada de incertidumbre, etc. A pesar de esto, aún con los códigos existentes, la calibración automática facilita enormemente la tarea de modelado. Por lo tanto, se sostiene que su uso debería de convertirse en práctica standard.

---

Résumé Létat du problème inverse des eaux souterraines est synthétisé. Laccent est placé sur la caractérisation de laquifère, où les modélisateurs doivent jouer avec lincertitude des modèles conceptuels (notamment la variabilité spatiale et temporelle), les facteurs déchelle, plusieurs inconnues sur différents paramètres (transmissivité, recharge, conditions aux limites, etc.), la non linéarité, et souvent la sensibilité de plusieurs variables détat (charges hydrauliques, concentrations) des propriétés de laquifère. A cause de ces difficultés, le calibrage ne peut être séparé du processus de modélisation, comme cest le cas dans dautres cas de figure. Par ailleurs, il peut être vu comme une des étapes dans le processus de détermination du comportement de laquifère. Il est montré que les méthodes dévaluation des paramètres actuels ne diffèrent pas si ce nest dans les détails des calculs informatiques. Il est montré quil existe une large panoplie de techniques d ‹inversion : codes de calcul utilisables par tout-un-chacun, accommodation de la variabilité via la géostatistique, incorporation dinformations géologiques et de différents types de données (température, occurrence, concentration en isotopes, âge, etc.), détermination de lincertitude. Vu ces développements, la calibration automatique facilite énormément la modélisation. Par ailleurs, il est souhaitable que son utilisation devienne une pratique standardisée.