Shear instabilities in arrested salt-wedge flows

‘One-sidedness’ in arrested salt-wedge flows is investigated with theoretical models based upon two-layer approximations. These models include the effects of rigid bottom boundaries and the effects of density interface displacement with respect to the centre of the shear layer. The results indicate that inclusion of both interface displacement and rigid boundaries in the model greatly contribute to the ‘one-sidedness’ phenomenon and influence the wave characteristics, especially their stability criteria. Data from laboratory experiments agreed well with the results produced by these models.     

Characteristic Features of REE and Pb–Zn–Ag Mineralizations in the Na Son Deposit,Northeastern Vietnam

The Na Son deposit is a small‐scale Pb–ZnPb–Zn–Ag deposit in northeast Vietnam and consists of biotite–chlorite schist, reddish altered rocks, quartz veins and syenite. The biotite–chlorite schist is intruded by syenite. Reddish altered rocks occur as an alteration halo between the biotite–allanite‐bearing quartz veins and the biotite–chlorite schist. Allanite occurs in the biotite–allanite‐bearing quartz veins and in the proximal reddish altered rocks. Rare earth element (REE) fluorocarbonate minerals occur along fractures or at rim of allanite crystals. The later horizontal aggregates of sulfide veins and veinlets cut the earlier reddish altered rocks. The earlier Pb–Zn veins consist of a large amount of galena and lesser amounts of sphalerite, pyrite and molybdenite. The later Cu veins cutting the Pb–Zn veins include chalcopyrite and lesser amounts of tetrahedrite and pyrite. The occurrences of two‐phase H₂O–CO₂ fluid inclusions in quartz from biotite–allanite‐bearing quartz veins and REE‐bearing fluorocarbonate minerals in allanite suggest the presence of CO₂ and F in the hydrothermal fluid. The oxygen isotopic ratios of the reddish altered rocks, biotite–chlorite schist, and syenite range from +13.9 to +14.9 ‰, +11.5 to +13.3 ‰, and +10.1 to +11.6 ‰, respectively. Assuming an isotopic equilibrium between quartz (+14.6 to +15.8 ‰) and biotite (+8.6 ‰) in the biotite–allanite‐bearing quartz vein, formation temperature was estimated to be 400°C. At 400°C, δ¹⁸O values of the hydrothermal fluid in equilibrium with quartz and biotite range from +10.5 to +11.7 ‰. These δ¹⁸O values are consistent with fluid that is derived from metamorphism. Assuming an isotopic equilibrium between galena (+1.5 to +1.7 ‰) and chalcopyrite (+3.4 ‰), the formation temperature was estimated to be approximately 300°C. The formation temperature of the Na Son deposit decreased with the progress of mineralization. Based on the geological data, occurrence of REE‐bearing minerals and oxygen isotopic ratios, the REE mineralization is thought to result from interaction between biotite–chlorite schist and REE‐, CO₂‐ and F‐bearing metamorphic fluid at 400°C under a rock‐dominant condition.     

The Preparation and Characterisation of Two New Geological Survey of Japan Geochemical Reference Materials: Copper ore JCu-1 and Zinc ore JZn-1

Two new geochemical reference materials, copper ore JCu-1 and zinc ore JZn-1 have been prepared by the Geological Survey of Japan (GSJ) for the determination of major and minor elements and isotopic compositions. JCu-1 is a sample of Cu-bearing sulfide ore typical of the Kamaishi mine in Iwate Prefecture, Japan, and is composed mainly of hedenbergite, chalcopyrite, quartz and calcite. Pyrrhotite, magnetite and actinolitic amphibole were also commonly found. The Zn-rich ore, JZn-1 is a crude ore from the Kamioka Pb-Zn mine in Gifu Prefecture, Japan. The sample consists of hedenbergite, quartz, calcite, sphalerite and epidote as main crystalline phase. Homogeneity test results showed that all studied constituents including ore elements such as Cu, Pb and Zn can be considered to be homogeneously distributed. Provisional collaborative analyses were carried out in ten laboratories, and the data were evaluated using a robust statistical method using z-scores. Recommended values for a number of major elements including TiO₂, Al₂O₃, MnO, MgO, CaO, Na₂O, K₂O, Fe (total), Zn, Cu and Pb were established. In addition, information values for eighteen major, minor and trace elements are presented to support future collaborative analyses.     

Verification of Net Primary Production Estimation Method in the Mongolian Plateau Using Landsat ETM＋ Data

We plan to estimate global net primary production (NPP) of vegetation using the Advanced Earth Observing Satellite-Ⅱ (ADEOS-Ⅱ) Global Imager (GLI) multi-spectral data. We derive an NPP estimation algorithm from ground measurement data on temperate plants in Japan. By the algorithm, we estimate NPP using a vegetation index based on pattern decomposition (VIPD) for the Mongolian Plateau. The VIPD is derived from Landsat ETM multi-spectral data, and the resulting NPP estimation is compared with ground data measured in a semi-arid area of Mongolia. The NPP estimation derived from satellite remote sensing data agrees with the ground measurement data within the error range of 15% when all above-ground vegetation NPP is calculated for different vegetation classifications.     

Analysis of ocean color spectra (III)

The spectral measurements of the attenuation coefficient of sea water and the absorption coefficient of suspended particles and of yellow substance were made with a spectrophotometer for the sea waters sampled in Tokyo Bay. These parameters can be used to compute the expected spectral irradiance reflectance. Some relationships between the optical properties of sea water and the concentration of dissolved organic carbon, the dry weight of suspended matter and chlorophyll-a concentration are presented. On the basis of these results, the possibility of modelling the relationship between optical and material properties is discussed.     

Supercooled drizzle formed by condensation–coalescence in the mid-winter season of the Canadian Arctic

Supercooled drizzle (freezing drizzle) was observed at Inuvik, N.W.T., Canada (68°22′N, 133°42′W) on December 20, 21 and 27, 1995. Meteorological conditions in which the supercooled drizzle could form under low temperatures (colder than −20°C) in the mid-winter season of the Canadian Arctic were examined from the sounding data and data measured by a passive microwave radiometer at ground level. The following results were obtained. (1) Supercooled drizzle fell to the ground with ice pellets and frozen drops on snow crystals. (2) The maximum size of supercooled drizzle particles increased as the depth of cloud layer saturated with respect to water increased. (3) Because a layer of air temperature higher than 0°C was not detected from the sounding data at Inuvik, melting of snow particles was impossible. It was concluded, therefore, that supercooled drizzle was formed by the condensation–coalescence process below freezing temperature.     

Optimum delay interval design in delay blasting

The major concern of this research is the reduction of blast vibrations at certain points of foremost importance. A procedure for optimum delay interval design, considering detonation time errors of the electric detonators, was proposed. Using the relationship between the peak particle velocity (PPV) and the delay at certain points of interest which was calculated by means of a computer program by simulating the superposition of the vibration waves emitted from each borehole, one can usually select the optimal delay interval in order to minimize the PPV. But due to the variations in the actual delay caused by the detonation time errors, the expected PPV usually not only depends on the nominal delay but also on the sensitivity of the PPV. Therefore, the selection of the optimum time interval for a delay blast should be based on both the optimum as well as several sub-optimal time intervals as candidates. In addition, the detonation time errors should be taken into consideration. Also, a new design concept, called 'combined delay blasting', which uses electronic detonators, is proposed to further reduce the PPV at the points of interest. Estimated vibration time histories based on this concept and their PPVs indicated considerably favorable results.     

A Study on the Mineralization of the Woxi Au–Sb–W Deposit,Western Hunan,China

The Woxi Au–Sb–W deposit in the western Hunan Province, China, is of hydrothermal vein type characterized by a rare mineral assemblage of stibnite, scheelite and native gold, of which gold fineness ranges from 998.6 to 1000. The mineralization sequence observed in the deposit is, from early to late, coarse‐grained pyrite – scheelite – stibnite – Pb–Sb–S minerals – sphalerite (+ cubanite) – fine‐grained pyrite. Native gold may have precipitated with scheelte. Microthermometric and LA–ICP–MS analyses of fluid inclusions in scheelite, quartz associated with scheelite and stibnite and barren quartz clarified that there may be at least three types of hydrothermal fluids during the vein formation in the Woxi deposit. Scheelite and native gold precipitated from the fluid of high temperature and salinity with high concentrations of metal elements, followed by stibnite precipitation. The later fluid of the highest temperature and salinity with low concentrations of the elements yielded the sphalerite mineralization. The latest fluid of low temperature and salinity with low concentrations of the elements is observed mainly in barren quartz. The remarkably high Au/Ag concentration ratios determined in the fluid inclusions in scheelite might be the reason for the extremely high gold fineness of native gold.