Direct ascent to the surface of asthenospheric magma in a region of convex lithospheric flexure

The stress field of oceanic lithosphere controls the distribution of submarine petit-spot volcanoes. However, the eruption sites of these petit-spot volcanoes are considered to be limited to concavely flexed regions of lithosphere off the outer rise. Here, we present new data for a recently identified petit-spot lava field on a convexly flexed section of the lithosphere adjacent to the subduction zone offshore of northeast Japan in an area containing more than 80 volcanoes. This area is marked by strongly alkaline lavas that were erupted on the convexly flexed region. As for the concavely flexed region where the petit-spots previously reported, the base of the lithosphere beneath the eruption sites is under extension, whereas the upper part of the lithosphere is under compression. This change in the stress field, from the lower to upper lithosphere, causes ascending dikes to stall in the mid-lithosphere, leading to metasomatic interaction with the surrounding peridotite. The new geochemical data of rocks and xenocrysts presented in this study indicate that strongly alkaline magmas erupted on the convexly flexed region would have ascended more rapidly through the mid-depth of lithosphere because of the extensional regime of the upper lithosphere and decreasing the degree of metasomatic reaction with the surrounding mantle peridotite. The results indicate that the degree of metasomatism and the compositional variations of petit-spot magmas are controlled mainly by the stress field of the lithosphere.     

Processes influencing iron distribution in the coastal waters of the Tsugaru Strait,Japan

We report measurements of iron, nutrients, dissolved oxygen, humic-type fluorescence intensity and chlorophyll a concentrations in the coastal waters at the inflow (western) and outflow (eastern) ends of Tsugaru Strait (Japan) in June 2003 and 2004. Two different water masses (intensive eastward flow “subtropical Tsugaru Warm Current Water (TWCw)” and weak westward flow “subarctic Oyashio Water (OW)”) were observed at the eastern end of the strait. TWCw at the southern part of the eastern strait was vertically homogeneous with a uniform concentrations of iron (0.7–1.1 nM for labile dissolved Fe and 14–20 nM for total dissolvable Fe in 2003) as well as other chemical, biological and physical components throughout the water column of 200 m due to strong vertical mixing in the strait. The degree of mixing in the Tsugaru Warm Current (TWC) is predominantly affected by diurnal tidal current, which is strong during the period of tropical tides and weak during the period of equinoctial ones. The especially strong vertical water mixing in 2003 is caused by large dissipation energy input due to the bottom friction of passage-flow through the strait and tidal current. At the northern part of the eastern strait, the fresh surface layer overlying the OW and the deep-bottom waters in 2003 contained large concentrations of dissolved iron, resulting from iron supplied from river runoff and shelf sediments, respectively. These results suggest that the most important mechanism for transporting iron in the strait is the strong vertical water mixing due to the tidal current, and that the iron sources in the coastal waters are the organic-associated, iron-rich freshwater input into the surface water.     

Temporal variations of the winter mixed layer south of the Kuroshio Extension

A monthly mean time series of the temperature profile in the recirculation gyre south of the Kuroshio Extension has been produced for the period 1971–2007 to examine temporal variations of the winter mixed layer. The winter mixed layer depth (MLD) shows both interannual and decadal variations and is significantly correlated with variation of the mean net surface heat flux in late autumn to early winter. There is also a close relation with the strength of pre-existing subsurface stratification, measured as vertical temperature gradients in the preceding summer. Linear multiple regression analysis shows that a significant fraction of the variations in the winter MLD is explained by the surface heat flux and the strength of the stratification. The contribution of the two factors is comparable.     

Internal structure of the Nojima Fault zone from the Hirabayashi GSJ drill core

Abstract The internal structures of the Nojima Fault, south-west Japan, are examined from mesoscopic observations of continuous core samples from the Hirabayashi Geological Survey of Japan (GSJ) drilling. The drilling penetrated the central part of the Nojima Fault, which ruptured during the 1995 Kobe earthquake (Hyogo-ken Nanbu earthquake) ( M 7.2). It intersected a 0.3 m-thick layer of fault gouge, which is presumed to constitute the fault core (defined as a narrow zone of extremely concentrated deformation) of the Nojima Fault Zone. The rocks obtained from the Hirabayashi GSJ drilling were divided into five types based on the intensities of deformation and alteration: host rock, weakly deformed and altered granodiorite, fault breccia, cataclasite, and fault gouge. Weakly deformed and altered granodiorite is distributed widely in the fault zone. Fault breccia appears mostly just above the fault core. Cataclasite is distributed mainly in a narrow (≈1 m wide) zone in between the fault core and a smaller gouge zone encountered lower down from the drilling. Fault gouge in the fault core is divided into three types based on their color and textures. From their cross-cutting relationships and vein development, the lowest fault gouge in the fault core is judged to be newer than the other two. The fault zone characterized by the deformation and alteration is assumed to be deeper than 426.2 m and its net thickness is > 46.5 m. The fault rocks in the hanging wall (above the fault core) are deformed and altered more intensely than those in the footwall (below the fault core). Furthermore, the intensities of deformation and alteration increase progressively towards the fault core in the hanging wall, but not in the footwall. The difference in the fault rock distribution between the hanging wall and the footwall might be related to the offset of the Nojima Fault and/or the asymmetrical ground motion during earthquakes.     

Stress-strain behaviour of reconstituted illitic clay at different temperatures

Tests on specimens of reconstituted illitic clay have examined the influence of temperature on the mechanical behaviour of clay soils. The program involved consolidation to effective confining pressures up to 1.5 MPa, heating to 100°C, and tests on normally consolidated and overconsolidated specimens with OCR = 2. The tests included isotropic consolidation, undrained triaxial compression with pore water pressure measurement, drained tests along controlled stress paths to investigate yielding behaviour, and undrained tests which involved heating and measurement of the resulting induced pore water pressures. The large strain strength envelope is independent of temperature. However, peak undrained strengths increase with temperature because smaller pore water pressures are generated during shearing. An important contribution from the study is a series of results for the yielding of illitic clay at three different temperatures. For the first time, there is clear evidence of yield loci decreasing in size with increasing temperature. An associated flow rule can be assumed without serious error. The results contribute to the confirmation of a thermal elastic-plastic soil model developed by the authors from cam clay following the addition of a small number of extra assumptions. Depending on the initial stress state, heating under undrained conditions may produce shear failure.     

Internal structures and U–Pb ages of zircons from a tuff layer in the Meishucunian formation, Yunnan Province, South China

The Precambrian/Cambrian (PC/C) boundary is one of the most important intervals for the evolution of life, represented by prominent biological evolution from the first appearance of soft-bodied animals from the late Neoproterozoic to the sudden diversification of animals with mineralized skeletons in the Cambrian. In South China several areas contain many fossils and are well exposed, suitable for the investigation of PC/C boundary. However, geochronological relationships are still poorly known because of lack of combined detailed investigations of internal structures of zircons and in-situ U–Pb dating.We focus on the internal structure of zircons from a tuff layer within Bed 5 in the Meishucun section on which we undertook cathodoluminescence (CL) imaging and in-situ U–Pb dating with LA-ICP-MS and nano-SIMS. Over 600 zircons from the tuff layer were classified into three types based on their CL images: oscillatory rims, inherited cores and dull structures. U–Pb dating of the internal structure of the zircons by LA-ICP-MS clearly shows a distinct unimodal age population dependent on the structure: 531 ± 17 Ma for the oscillatory rims and 515 Ma for the dull structures. The clear oscillatory zonation, the prismatic morphology, and their occurrence indicate that the oscillatory rims were formed from felsic magmatism, and that the U–Pb nano-SIMS age of 536.5 ± 2.5 Ma records the depositional age of the tuff. Our results indicate that the PC/C boundary is situated below Bed 5, and therefore the bottom of Zone 1 (Marker A) is more appropriate for the PC/C boundary than is the top of Zone 1 (Marker B). The age of a positive anomaly (P2) in the early Cambrian is estimated to be ca. 536 Ma.     

On the wave dependence of sea-surface wind stress

Analysis is made of wind and wave data, which were obtained during the passage of Typhoon 8013 at an Ocean Data Buoy Station south of Honshu operated by the Japan Meteorological Agency, in order to investigate the wave dependence of sea-surface roughness parameter in the situation where wind waves are dominant with less significant swells. The data fit better the wave-dependent expression of the wind stress,z _{0 p}/u*=, than to Charnock's formula,gz ₀/u*²=, wherez ₀ is the roughness length, _p the angular frequency of the spectral peak of wind waves,u* the friction velocity of air,g the acceleration of gravity, and are non-dimensional constants. The results are very similar to those of our previous study using data from an oil producing platform in the Bass Strait, Australia, although the type of observation system and the synoptic situation of the winds and wind waves were totally different.     

Measurement of Noble Gas Solubility in Seawater Using a Quadrupole Mass Spectrometer

A quadrupole-based mass spectrometric system for determining noble gas (He, Ne, Ar, Kr and Xe) abundances in a liquid sample has been developed and applied to seawater equilibrated with the atmosphere at several temperatures. After known amounts of isotopic spikes (²²Ne, ³⁶Ar, ⁸⁶Kr and ¹²⁴Xe) were introduced into the preparation vacuum line, dissolved gases were extracted from seawater and well mixed with the spikes by ultrasonic vibration. Noble gases were purified using three-stage hot Ti getters and separated by two activated charcoal traps held at low temperature (liquid nitrogen and dry ice—ethanol). Noble gas abundances were measured by a relatively inexpensive quadrupole mass spectrometer based on the isotope dilution technique. Precisions obtained by repeated measurements for He, Ne, Ar, Kr and Xe are 1.5%, 0.4%, 0.4%, 0.4% and 0.6%, respectively. Noble gas abundances in air-saturated seawater at eight temperature steps (1.0°C, 5.5°C, 10.0°C, 14.4°C, 17.0°C, 21.3°C, 24.6°C, and 29.6°C) were measured using the analytical system. The overall variation of the abundances with temperature agrees well with those of NaCl brines reported in the literature. We propose here new constants to fit observed data to empirical equation of noble gas solubility in seawater with its temperature variation.     

Evaluation of marine surface winds observed by SeaWinds and AMSR on ADEOS-II

Marine surface winds observed by two microwave sensors, SeaWinds and Advanced Microwave Scanning Radiometer (AMSR), on the Advanced Earth Observing Satellite-II (ADEOS-II) are evaluated by comparison with off-shore moored buoy observations. The wind speed and direction observed by SeaWinds are in good agreement with buoy data with root-mean-squared (rms) differences of approximately 1 m s⁻¹ and 20°, respectively. No systematic biases depending on wind speed or cross-track wind vector cell location are discernible. The effects of oceanographic and atmospheric environments on the scatterometry are negligible. Though the wind speed observed by AMSR also showed agreement with buoy observations with rms difference of 1.27 m s⁻¹, the AMSR wind speed is systematically lower than the buoy data for wind speeds lower than 5 m s⁻¹. The AMSR wind seems to have a discontinuous trend relative to the buoy data at wind speeds of 5–6 m s⁻¹. Similar results have been obtained in an intercomparison of wind speeds globally observed by SeaWinds and AMSR on the same orbits. A global wind speed histogram of the AMSR wind shows skewed features in comparison with those of SeaWinds and European Centre for Medium-range Weather Forecasts (ECMWF) analyses.