碳酸岩Sr、Nd、Pb 同位素地球化学研究评述

碳酸岩是出露相对较少的幔源岩石，其中Sr与Nd是研究地幔物质组成的主要对象之一。本文统计了世界上主要碳酸岩的锶、钕、铅同位素组成特征；研究显示，碳酸岩源区主要是洋岛玄武岩高U／Pb的HIMU端员和富集端员(EM1或EM2)的混合作用；此外大部分碳酸岩的锶、钕同位素落在大洋玄武岩范围内；这些均表明其成因与地慢柱有密切联系。碳酸岩及与之共生的硅酸岩的同源或独立源区模式部很难充分解释两者同位素组成特征，逭反映碳酸岩的演化模式涉及更复杂的过程。可能是俯冲作用使碳酸岩源区经历不同时间和程度的富集、亏损过程导致地幔源区成分不均一。     

含煤盆地煤储层后期改造形式及对煤层气选区影响--以华北克拉通选区为例

阐述了改造型含煤盆地煤储层被改造的两种形式；煤体结构的改造及构造煤的形成原因；后生充填物对煤层孔隙的改造及形成原因。提出了以构造煤发育程度作为改造型含煤盆地改造强度的一个指标。概述了华北克拉通盆地由中生代剪压应力转化为新生代剪张应力和拉张应力，而在盆地内形成以挤压构造为主到伸展构造为主的演化历程，及不同构造类型的区域分布，指出这种演化极易形成构造煤和后生充填物。提出将华北克拉通含煤盆地分为3种改造类型及其分布区域，分析了各自区域的煤储层物性及对煤层气开发选区的影响。提出应重视鄂尔多斯盆地侏罗纪煤层的煤层气．研究与开发．     

磷对金刚石增强型硬质合金复合齿性能的影响

在金刚石增强型硬质合金复合齿基体中添加不同量红磷，可降低复合齿烧结温度，实现低温活化烧结。研究表明：添加0．3％(ωB)P的复合齿基体性能最好，采用化学镀Ni-P合金添加P和球磨添加0．1％P的方式，复合齿超硬部分的磨耗比和复合齿的抗冲击功优于单纯通过球磨添加0．3％P的超硬复合齿。为了实现金刚石增强型硬质合金复合齿的低温活化烧结，磷元素最优的添加方式是化学镀结合球磨的添加方式。     

高坪-吉心段公路喀斯特工程地质综合勘察

以沪蓉国道主干线湖北省高坪-吉心段的喀斯特地质勘察工作为例，探讨喀斯特地区公路工程地质综合勘察的基本方法。在喀斯特地区运用遥感和地理信息技术技术、地质测绘、综合物探以及地质钻探等勘察手段，通过综合分析各种勘探成果，能够较准确地查明可溶岩的分布、喀斯特形态类型、分布规律、控制因素以及喀斯特水的赋存、分布和运移规律等，并根据不同的喀斯特地貌提出了有针对性的处理对策。通过不断的实践和经验总结。针对喀斯特工程地质问题合理运用综合工程勘察方法，能做出科学的分析评价，可以适应喀斯特区公路建设的需要，并且供今后在喀斯特地区修建公路时参考和借鉴。     

乌拉苔草光合速率日变化及日同化量

乌拉苔草沼泽是长白山沟谷湿地的重要类型 ,对其光合速率研究的结果表明 ,乌拉苔草光合速率日变化呈单峰曲线 ,最高峰出现在 1 0时 ,最大值是 1 8.0 7μmol(CO2 ) / (m2 ·s) ;与其该群落伴生的修氏苔草光合速率日变化出现“午休”现象。影响光合速率最大的环境因素是光量子通量密度和叶温 ,呈极显著的正相关 ,其他因素亦多呈正相关 ,环境因子综合影响了乌拉苔草的光合日进程。乌拉苔草光合作用的日总同化量为 1 896 0 1 .2 μmol(CO2 ) /m2 ,是光合能力较强的一种沼泽植物     

日本国内旅游业的发展及其地域特征

日本旅游业已成为国民经济的重要部门，据2002年日本交通省的统计表明，观光产业GDP已占国内生产总值的2．2％，这一数字与美国相近。但与西方国家显著不同的是，在美、英、法、意等旅游业发达国家中，国际旅游业占据举足轻重地位，而日本的旅游业却以国内旅游为主体。据日本最大旅行社JTB的统计，2002年日本旅游出行人数为34013万人次(其中出国旅游1664万人次)，而同年日本接待的外国入境游客刚刚超过500万人次。本文旨在介绍和分析日本国内旅游业的发生、发展的变化特征，以及国民不同的旅游方式和旅游地域差异。     

Experimental study on reduction of U (Ⅵ) by an anaerobic bacterium, Shewanella putrefaciens: Application to sandstone-hosted interlayer oxidation-zone type uranium deposits, China

An experimental study on reduction of U (Ⅵ) by anaerobic bacteria, Shewane//a putrefaciens, is first reported here in China. The experimental conditions were: 35℃ and pH =7.0-7.4, corresponding to a physicochemical environments in which the sandstone-hosted interlayer oxidation-zone type uranium deposit formed in Northwest China's Xinjiang. Bacteria adopted in the present experiment, Shewanella putrefaciens, occur extensively in natural environment. Our study shows that nano-crystal precipitates of uraninite quickly occurred on the surface of the cells within one week. It was found that the pitchblende was characterized by a random arrangement of uraninite nanocrystals (2-4 nm) in it, significantly different from natural pitchblende in which uraninite nanocrystals are arranged in order. Finally, a possible mechanism of uranium biomineralization by microorganisms in the deposits is discussed. Our investigation may supply a technical train of thoughts for bioremediation of nuclear-contaminated water environments and for underground dissolving extraction of the sandstone-hosted uranium ores.     

REE and (э)Nd of clay fractions in sediments from the eastern Pacific Ocean: Evidence for clay sources

Clay fractions in the non-calcareous surface sediments from the eastern Pacific were analyzed for clay minerals, REE and 143Nd/144Nd. Montmorillonite/illite ratio (M/I ratio), total REE contents ((REE), LREE/HREE ratio and cerium anomaly (бCe) may effectively indicate the genesis of clay minerals. Clay fractions with M/I ratio >1, бCe (0.85, (REE (400 μg/g, LREE/HREE ratio (4, and REE patterns similar to those of pelagic sediments are terrigenous and autogenetic mixed clay fractions and contain more autogenetic montmorillonite. Clay fractions with M/I ratio <1, бCe=0.86 to 1.5, ΣREE=200 to 350 μg/g, LREE/HREE ratio (6 and REE distribution patterns similar to that of China loess are identified as terrigenous clay fraction. The 143Nd/144Nd ratios or (э)Nd values of clay fractions inherit the features of terrigenous sources of clay minerals. Clay fractions are divided into 4 types according to (э)Nd values. Terrigenous clay minerals of type I with the (э)Nd values of -8 to -6 originate mainly from North American fluvial deposits. Those of type II with the (э)Nd values of -9 to -7 are mainly from the East Asia and North American fluvial deposits. Those of type III with (э)Nd values of -6 to -3 could come from the central and eastern Pacific volcanic islands. Those of type IV with (э)Nd values of -13 to -12 may be from East Asia eolian. The terrigenous and autogenetic mixed clay fractions show patchy distributions, indicating that there are volcanic or hot-spot activities in the eastern Pacific plate, while the terrigenous clay fractions cover a large part of the study area, proving that the terrigenous clay minerals are dominant in the eastern Pacific.     

Establishment of apparent quantum yield and maximum ecosystem assimilation on Tibetan Plateau alpine meadow ecosystem

The alpine meadow is widely distributed on the Tibetan Plateau with an area of about 1.2×106kn2. Damxung County, located in the hinterland of the Tibetan Plateau, is the place covered with this typical vegetation. An open-path eddy covariance system was set up in Damxung rangeland station to measure the carbon flux of alpine meadow from July to October,2003. The continuous carbon flux data were used to analyze the relationship between net ecosystem carbon dioxide exchange (NEE) and photosynthetically active radiation (PAR), as well as the seasonal patterns of apparent quantum yield (α) and maximum ecosystem assimilation (Pmax).Results showed that the daytime NEE fitted fairly well with the PAR in a rectangular hyperbola function, with α declining in the order of peak growth period (0.0244 μmolCO2 · μmol-1pAR) ＞early growth period ＞ seed maturing period ＞ withering period (0.0098 μmolCO2 · μmol-1pAR).The Pmax did not change greatly during the first three periods, with an average of 0.433mgCO2· m-2· s-1, i.e. 9.829 μmolCO2· m-2· s-1. However, during the withering period, Pmax was only 0.35 mgCO2 · m-2 · s-1, i.e. 7.945 μmolCO2 · m-2 · s-1. Compared with other grassland ecosystems, the α of the Tibetan Plateau alpine meadow ecosystem was much lower.     

Studies on wind environment around high buildings in urban areas

High buildings or architectural complex in urban areas remarkably distort the urban surface wind fields. As the air flow approaches,local strong wind may appear around the buildings. The strong wind makes the pedestrians on sidewalks, entrances and terrace very uncomfortable and causes the pedestrian level wind environment problem. In this studies, hot-wire wind measurement, wind scouring in wind tunnel and numerical computation were carried out to evaluate the wind environment of tall buildings in the prevailing flow conditions in Beijing areas. The results obtained by three techniques were compared and mutually verified. The conclusions drawn from three approaches agree with each other. Also the advantages and limitations of each method were analyzed. It is suggested that the combination of different techniques may produce better assessment of wind environment around high buildings.