三维旋转扫描测量平台设计与实现

本设计主要用于360°旋转的三维扫描,实现角度数据的实时获取。设计中采用单片机控制交流伺服电机进行自定的角度、速度与方向的旋转并实时上传时间、角度数据至上位机进行处理,实现了对平台旋转精度的控制与检测,着重研究了该传感器误差源的产生,对实际应用中的误差进行了定量分析,利用偏心改正、4分频等方法减少了误差,提高了参数精度。角度范围为360°,角度分辨率为0.01°。     

Lithium abundance in cold giants

Byurakan Astrophysical Observatory. Translated from Astrofizika, Vol. 33, No. 2, pp. 271–281, September–October, 1990.     

浅谈项目投资失败的原因及对策

地勘单位在向企业化经营转变的过程中 ,投资兴办了许多企业 ,但不少项目以失败告终。文章分析探讨了失败的原因 ,并提出相应的对策     

重庆地面最高气温与最大风速年极值的渐近分布

利用重庆1951-1990年间地面最高气温和1956-1990年间地面最大风速年极值的记录,采用韦伯分布和耿贝尔分布分别对其渐近分布进行拟合.通过统计推断,找出重庆地面最高气温和地面最大风速年极值遵循的最佳渐近分布--韦伯分布.     

对地方电视台转播CCTV时延的测定

讲述了同步广播卫星电视时间信号的测量方法和测量结果，获得了CCTV1、CCTV2通过同一颗卫星（亚太－1A）转播的时延差值为16333μs，测量精度在10ns以内；CCTV2、CCTV4分别经两颗卫星（亚太－1A、亚洲－Ⅱ）转播，在陕西天文台卫星地面接收站时延差值为1644．20μs，精度为50μs，并分析了影响时延差值和精度的原因。同时测量了地方电视台转播亚太－1A的CCTV信号与直接接收亚太－1A的CCTV信号的时延差值，其测量精度为0．1μs。这些结果为利用同步广播卫星的电视信号进行高精度的时间服务提供了参考依据。     

Does Einstein's G.R. theory predict gravitational radiation of PSR 1913+16?

A critical re-examination of the self-consistency of Einstein's gravitational radiation theory is given in the present paper with special reference to its claimed prediction of the observed data on PSR 1913+16.The author is Alfred Yu     

Protective effect of topically applied polypeptide from Chlamys farreri against ultraviolet radiation-induced chronic skin damage in guinea pig

Polypeptide fromChlamys farreri (PCF), a topical polypeptide isolated fromChlamys farreri, was used in this experiment aimed to investigate the photoprotective effect of PCF against chronic skin damage induced by ultraviolet A (UVA) and ultraviolet B (UVB) radiation. The chronic ultraviolet-irradiated guinea pig model was established, and visible changes in the skin including wrinkling, sagging and erythema were observed. Malondialdehyde (MDA) and antioxidant enzymes including superoxide dismutase (SOD) and glutathione peroxidase (GSH-px) in the dorsal skin were determined using biochemical methods. The results showed: (1) PCF (5 % and 20%) could greatly protect the dorsal skin of guinea pig against wrinkling, sagging and erythema induced by UV radiation in a concentration-dependent manner. (2) PCF could reduce MDA formation in the dorsal skin caused by UV irradiation, while increasing the activities of SOD and GSH-px. (3) The differences among the PCF groups and UV model group were significant (P<0.05,P<0.01). These results indicated that topical application, of PCF provided broad solar UV spectrum photoprotection; and that the antioxidant property of PCF might play a role in photoprotection. Project No. 39970638 supported by the NSFC, and the Science and Technology Bureau of Qingdao (No. 2001-28-50).     

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.