Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

Phase Shift between Changes in Global Temperature and Atmospheric CO2 Content under External Emissions of Greenhouse Gases into the Atmosphere

Izvestiya, Atmospheric and Oceanic Physics - The phase shift between changes in the global surface temperature Tg and atmospheric CO2 content $${{q}_{{{\text{C}}{{{\text{O}}}_{2}}}}}$$ has been...     

Integration of Electrofacies and Hydraulic Flow Units to Delineate Reservoir Quality in Uncored Reservoirs: A Case Study,Nubia Sandstone Reservoir,Gulf of Suez,Egypt

Natural Resources Research - Recognition of reservoir quality is an important objective in reservoir characterization process. By definition, the quality of a reservoir is described by its...     

生态地理学概念界定及其经典案例分析

对生态地理学的概念进行了详细讨论和辨析,并将它与相近学科如生物地理学、生态地理区划、宏生态学等进行了比较分析,界定了生态地理学的概念。研究认为：生态地理学是生态学和地理学的交叉学科,是研究生态系统各组分关系和生态过程的地理空间分布格局或/和时间演变规律及其与地理环境耦合机制的学科。生态地理学的目的是揭示不同环境梯度下或不同时间尺度上生态系统各组分关系和生态过程的普适性规律及其成因。同时,结合国内外野外实验平台介绍,在全球变化等研究领域列举了经典案例进行分析：① 全球不同气候带森林凋落物分解和碳汇功能的研究;② 中国不同陆地生态系统碳通量和碳汇功能研究;③ 中国东北样带和南北样带陆地生态系统的脆弱性与适应性研究;④ 中国北方草地样带尺度的生态系统生态学研究。主要目的是在辨析生态地理学概念的基础上指出未来发展方向,推动生态地理学的发展。     

Creating an isotopically similar Earth–Moon system with correct angular momentum from a giant impact

The giant impact hypothesis is the dominant theory explaining the formation of our Moon. However, the inability to produce an isotopically similar Earth–Moon system with correct angular momentum has cast a shadow on its validity. Computer-generated impacts have been successful in producing virtual systems that possess many of the observed physical properties. However, addressing the isotopic similarities between the Earth and Moon coupled with correct angular momentum has proven to be challenging. Equilibration and evection resonance have been proposed as means of reconciling the models. In the summer of 2013, the Royal Society called a meeting solely to discuss the formation of the Moon. In this meeting, evection resonance and equilibration were both questioned as viable means of removing the deficiencies from giant impact models. The main concerns were that models were multi-staged and too complex. We present here initial impact conditions that produce an isotopically similar Earth–Moon system with correct angular momentum. This is done in a single-staged simulation. The initial parameters are straightforward and the results evolve solely from the impact. This was accomplished by colliding two roughly half-Earth-sized impactors, rotating in approximately the same plane in a high-energy, off-centered impact, where both impactors spin into the collision.     

Design Experience of a Demonstrator Descent Vehicle Introducing Aeroelastic Deployable Structural Elements to Space Engineering

The development project of a prototype demonstrator for a descent vehicle and the possibilities of descent from orbit using aero-elastic braking devices deployable in space and in the atmosphere is considered. The project was carried out jointly by the Lavochkin Scientific Production Association and the Moscow Aviation Institute teams in 2013–2015. The results are evaluated for both the project itself and the cooperation of the two organizations.     

Simulating the Propagation of Infrasonic Waves and Estimating the Energy of the Chelyabinsk Meteoroid Explosion Observed on February 15, 2013

Results obtained from simulating the propagation of infrasonic waves from the Chelyabinsk meteoroid explosion observed on February 15, 2013, are given. The pseudodifferential parabolic equation (PDPE) method has been used for calculations. Data on infrasonic waves recorded at the IS31 station (Aktyubinsk, Kazakhstan), located 542.7 km from the likely location of the explosion, have been analyzed. Six infrasonic arrivals (isolated clearly defined pulse signals) were recorded. It is shown that the first “fast” arrival (F) corresponds to the propagation of infrasound in a surface acoustic waveguide. The rest of the arrivals (T1–T5) are thermospheric. The agreement between the results of calculations based on the PDPE method and experimental data is satisfactory. The energy E of the explosion has been estimated using two methods. One of these methods is based on the law of conservation of the acoustic pulse I, which is a product of the wave profile area S/2 of the signal under analysis and the distance to its source E _I [kt] = 1.38 × 10^–10 (I [kg/s])^1.482. The other method is based on the relation between the energy of explosion and the dominant period T of recorded signal E _T [kt] = 1.02 × (T [s]²/σ)^3/2, where σ is the dimensionless distance determining the degree of nonlinear effects during the propagation of sound along ray trajectories. According to the data, the explosion energy E _I,T ranges from 1.87 to 32 kt TNT.     

Daily-Seasonal Variation in the Number of Remotely Observed,Pulsed, ULF Electromagnetic Earthquakes and the Spatial Distribution of Their Generation Zones on the Earth’s Surface

Geomagnetism and Aeronomy - Based on data from long-term observations at two geophysical observatories, Borok and College, distantly spaced in latitude and longitude, the results of remote...     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.