Tectonic controls on Miocene sedimentation in the Southern Taranaki Basin and implications for New Zealand plate boundary deformation

Miocene strata in the southern Taranaki Basin (STB), up to 3 km thick, provide a distal record of erosion associated with plate boundary deformation in New Zealand. 2D and 3D seismic reflection data tied to drillhole stratigraphy have been used to constrain four main phases of basin development. These are: (a) Early Miocene (22–19 Ma) subsidence, dominantly bathyal water depths and deposition of minor submarine fans along the eastern basin margin. (b) Middle Miocene (19–14 Ma) widespread submarine fan deposition on a bathyal basin floor in the central STB. (c) Rapid Middle–Late Miocene (14–7 Ma) progradation of the shelf break northwards across the STB. (d) Widespread uplift and erosion of the STB during the latest Miocene–Pliocene (7–4.5 Ma). Bathyal water depths and fan deposition in the Early Miocene were influenced by vertical motions on major reverse faults and regional subsidence produced by subduction of the Pacific plate beneath northern New Zealand. Subsequent submarine fan deposition and northward shelf‐break progradation reflect increasing input of terrigenous material, primarily eroded from an uplifting region to the south of the STB. Sedimentation patterns in the STB are consistent with the age and locations of conglomerates deposited in onshore West Coast basins, related to this uplift and erosion. Sediment transport in the West Coast region was mainly parallel to NNE trending active reverse faults, and in the STB was perpendicular to the NE‐SW orientated shelf break, especially from ca. 14–7 Ma, when sedimentation rates exceeded fault‐displacement rates. Increases in sedimentation rates in the STB coincide with regional increases in the rates of shortening that appear to reflect plate boundary‐wide events and have been attributed to, or correlated with, increases in the plate convergence rate. Miocene sedimentation patterns in the STB thus reflect both intra‐basinal deformation and tectonic signals from the wider developing New Zealand plate boundary.     

Impact of multi-purpose aquifer utilisation on a variable-density groundwater flow system in the Gippsland Basin, Australia

The Latrobe aquifer in the Gippsland Basin in southeastern Australia is a prime example for emerging resource conflicts in Australian sedimentary basins. The Latrobe Group forms a major freshwater aquifer in the onshore Gippsland Basin, and is an important reservoir for oil and gas in both onshore and offshore parts of the basin. The Latrobe Group and overlying formations contain substantial coal resources that are being mined in the onshore part of the basin. These may have coal-seam-gas potential and, in addition, the basin is considered prospective for its geothermal energy and CO₂ storage potential. The impacts of groundwater extraction related to coal-mine dewatering, public water supply, and petroleum production on the flow of variable-density formation water has been assessed using freshwater hydraulic heads and impelling force vectors. Groundwater flows from the northern and western edges towards the central part of the basin. Groundwater discharge occurs mainly offshore along the southern margin. Post-stress hydraulic heads show significant declines near the petroleum fields and in the coal mining areas. A hydrodynamic model of the Latrobe aquifer was used to simulate groundwater recovery in the Latrobe aquifer from different scenarios of cessation of groundwater and other fluid extractions.     

Concept and workflow for 3D visualization of atmospheric data in a virtual reality environment for analytical approaches

In the future, climate change will strongly influence our environment and living conditions. Weather and Climate simulations that predict possible changes produce big data sets. The combination of various variables of climate models with spatial data from different sources helps to identify correlations and to study key processes. In this paper, the results of the Weather Research and Forecasting model are visualized for two regions. For this purpose, a continuous workflow that leads from the integration of heterogeneous raw data to 3D visualizations that can be displayed on a desktop computer or in an interactive virtual reality environment is developed. These easy-to-understand visualizations of complex data are the basis for scientific communication and for the evaluation and verification of models as well as for interdisciplinary discussions of the research results.     

Boundary layer and aerosol evolution during the 3rd Lagrangian experiment of ACE‐2

Aircraft measurements are presented of the Lagrangian evolution of a marine boundary layer over a 30‐h period during the ACE‐2 field campaign. At the start of the observational period, a 500‐m deep polluted marine internal boundary layer (MIBL) was overlain by the remnants of a polluted continental boundary layer extending to around 2 km below a clean, dry free troposphere. The MIBL grew rapidly to a thickness of 900–1000 m in response to increasing sea surface temperatures. No significant aerosol spectral evolution was observed in the boundary layer. Low concentrations of SO₂ were observed in the MIBL suggesting that the air mass contained relatively aged aerosol. Aerosol spectra show a broad mode with a modal diameter of around 0.1μm. The polluted layer between the MIBL and the unpolluted free troposphere was only weakly and intermittently turbulent which prevented significant entrainment of clean air into the polluted layer from aloft. The polluted layer depth was thus controlled mainly by subsidence which as a result becomes shallower, decreasing from over 2000 m to around 1200 m during the observational period. The aerosol characteristics of the polluted layer were similar to those in the MIBL and so although the MIBL entrained considerable amounts of air from above the MIBL the aerosol characteristics underwent no significant change. This has important implications for the rate at which a polluted continental air mass is converted to a clean marine one. The dataset should prove useful in the validation of the modelling of continental pollution outbreaks.     

Assessing future climatic changes of rainfall extremes at small spatio-temporal scales

Climate change is expected to influence the occurrence and magnitude of rainfall extremes and hence the flood risks in cities. Major impacts of an increased pluvial flood risk are expected to occur at hourly and sub-hourly resolutions. This makes convective storms the dominant rainfall type in relation to urban flooding. The present study focuses on high-resolution regional climate model (RCM) skill in simulating sub-daily rainfall extremes. Temporal and spatial characteristics of output from three different RCM simulations with 25 km resolution are compared to point rainfall extremes estimated from observed data. The applied RCM data sets represent two different models and two different types of forcing. Temporal changes in observed extreme point rainfall are partly reproduced by the RCM RACMO when forced by ERA40 re-analysis data. Two ECHAM forced simulations show similar increases in the occurrence of rainfall extremes of over a 150-year period, but significantly different changes in the magnitudes. The physical processes behind convective rainfall extremes generate a distinctive spatial inter-site correlation structure for extreme events. All analysed RCM rainfall extremes, however, show a clear deviation from this correlation structure for sub-daily rainfalls, partly because RCM output represents areal rainfall intensities and partly due to well-known inadequacies in the convective parameterization of RCMs. The results highlight the problem urban designers are facing when using RCM output. The paper takes the first step towards a methodology by which RCM performance and other downscaling methods can be assessed in relation to the simulation of short-duration rainfall extremes.     

A study of lignin degradation in leaf and needle litter using C-labelled tetramethylammonium hydroxide (TMAH) thermochemolysis: Comparison with CuO oxidation and van Soest methods

We studied the degradation of lignin in leaf and needle litter of ash, beech, maple, pine and spruce using ¹³C-labelled tetramethylammonium hydroxide (¹³C TMAH) thermochemolysis. Samples were allowed to decompose for 27 months in litter bags at a German spruce forest site, resulting in a range of mass loss from 26% (beech) to 58% (ash). In contrast to conventional unlabelled TMAH thermochemolysis, ¹³C-labelling allows thermochemolysis products from lignin, demethylated lignin and other polyphenolic litter compounds (e.g. tannins) to be distinguished. Proxies for lignin degradation (phenol yield; acid/aldehyde ratio of products) changed considerably upon correction for the contribution of non-lignin sources to the thermochemolysis products. Using the corrected values, we found increasing acid/aldehyde values as well as decreasing or constant yield of lignin derived phenols normalised to litter carbon, suggesting pronounced lignin degradation by wood-rotting fungi. No indication for build up of demethylated lignin through the action of brown rot fungi on ring methoxyls was found. The results were compared with those of other analytical techniques applied in previous studies. Like ¹³C-TMAH thermochemolysis, CuO oxidation showed increasing lignin oxidation (acid/aldehyde ratio) and no/little enrichment of lignin derived phenols in the litter. Molecular lignin degradation patterns did not match those from analysis of total acid unhydrolysable residues (AURs). In particular, the long assumed selective preservation of lignin during the first months of litter decomposition, based on AUR analysis, was not supported by results from the CuO and ¹³C TMAH methods.     

On-line fluorometry of multiple reactive and conservative tracers in streams

Performing tracer tests using artificial tracer compounds is a common practice to characterize natural streams regarding their (reactive) transport properties. Recently, the fluorescent compound resazurin was introduced as a reactive stream tracer to quantify hyporheic exchange and metabolic activity of streams. This tracer, together with its reaction product resorufin and a conservative tracer (in our case fluorescein), provides additional information about transport properties of the stream and its hyporheic zone and can therefore overcome restrictions that are commonly affiliated with the use of conservative tracers alone. However, all previously published studies using this tracer system were based on manual sampling of the water. This usually limits the number of measurements and thus the achievable temporal resolution, and potentially endangers data quality due to inadequate handling of samples. In this paper, a modified version of the GGUN-FL30 on-line fluorometer is presented in which the optics have been modified to allow measuring the concentrations of all three tracers simultaneously at intervals of 10 s. Experiments under controlled and natural conditions showed that the performance of the on-line fluorometer regarding tracer separation efficiency and practical detection limits is comparable to a high-performance laboratory spectrofluorometer. Furthermore, suggestions are given on how to correct tracer signal fluctuations caused by temporal changes in temperature and pH that might occur during a field tracer test.     

A climate model intercomparison at the dynamics level

Until now, climate model intercomparison has focused primarily on annual and global averages of various quantities or on specific components, not on how well the general dynamics in the models compare to each other. In order to address how well models agree when it comes to the dynamics they generate, we have adopted a new approach based on climate networks. We have considered 28 pre-industrial control runs as well as 70 20th-century forced runs from 23 climate models and have constructed networks for the 500 hPa, surface air temperature (SAT), sea level pressure (SLP), and precipitation fields for each run. We then employed a widely used algorithm to derive the community structure in these networks. Communities separate “nodes” in the network sharing similar dynamics. It has been shown that these communities, or sub-systems, in the climate system are associated with major climate modes and physics of the atmosphere (Tsonis AA, Swanson KL, Wang G, J Clim 21: 2990–3001 in 2008; Tsonis AA, Wang G, Swanson KL, Rodrigues F, da Fontura Costa L, Clim Dyn, 37: 933–940 in 2011; Steinhaeuser K, Ganguly AR, Chawla NV, Clim Dyn 39: 889–895 in 2012). Once the community structure for all runs is derived, we use a pattern matching statistic to obtain a measure of how well any two models agree with each other. We find that, with the possible exception of the 500 hPa field, consistency for the SAT, SLP, and precipitation fields is questionable. More importantly, none of the models comes close to the community structure of the actual observations (reality). This is a significant finding especially for the temperature and precipitation fields, as these are the fields widely used to produce future projections in time and in space.     

Numerical study on wave dynamics and wave-induced bed erosion characteristics in Potter Cove, Antarctica

Wave generation, propagation, and transformation from deep ocean over complex bathymetric terrains to coastal waters around Potter Cove (King George Island, South Shetland Islands, Antarctica) have been simulated for an austral summer month using the Simulating Waves Nearshore (SWAN) wave model. This study aims to examine and understand the wave patterns, energy fluxes, and dissipations in Potter Cove. Bed shear stress due to waves is also calculated to provide a general insight on the bed sediment erosion characteristics in Potter Cove.A nesting approach has been implemented from an oceanic scale to a high-resolution coastal scale around Potter Cove. The results of the simulations were compared with buoy observations obtained from the National Data Buoy Center, the WAVEWATCH III model results, and GlobWave altimeter data. The quality of the modelling results has been assessed using two statistical parameters, namely the Willmott’s index of agreement D and the bias index. Under various wave conditions, the significant wave heights at the inner cove were found to be about 40–50 % smaller than the ones near the mouth of Potter Cove. The wave power in Potter Cove is generally low. The spatial distributions of the wave-induced bed shear stress and active energy dissipation were found to be following the pattern of the bathymetry, and waves were identified as a potential major driving force for bed sediment erosion in Potter Cove, especially in shallow water regions. This study also gives some results on global ocean applications of SWAN.     

Numerical study on wave dynamics and wave-induced bed erosion characteristics in Potter Cove,Antarctica

Wave generation, propagation, and transformation from deep ocean over complex bathymetric terrains to coastal waters around Potter Cove (King George Island, South Shetland Islands, Antarctica) have been simulated for an austral summer month using the Simulating Waves Nearshore (SWAN) wave model. This study aims to examine and understand the wave patterns, energy fluxes, and dissipations in Potter Cove. Bed shear stress due to waves is also calculated to provide a general insight on the bed sediment erosion characteristics in Potter Cove.A nesting approach has been implemented from an oceanic scale to a high-resolution coastal scale around Potter Cove. The results of the simulations were compared with buoy observations obtained from the National Data Buoy Center, the WAVEWATCH III model results, and GlobWave altimeter data. The quality of the modelling results has been assessed using two statistical parameters, namely the Willmott’s index of agreement D and the bias index. Under various wave conditions, the significant wave heights at the inner cove were found to be about 40–50 % smaller than the ones near the mouth of Potter Cove. The wave power in Potter Cove is generally low. The spatial distributions of the wave-induced bed shear stress and active energy dissipation were found to be following the pattern of the bathymetry, and waves were identified as a potential major driving force for bed sediment erosion in Potter Cove, especially in shallow water regions. This study also gives some results on global ocean applications of SWAN.