First retrieval of data regarding spatial distribution of Asian dust aerosol from the Geostationary Ocean Color Imager

Aerosol optical thickness (AOT) was retrieved from the Geostationary Ocean Color Imager (GOCI) on board the Communication, Ocean, and Meteorological Satellite (COMS) for the first time. AOT values were retrieved over the ocean at a spatial scale of 0.5 × 0.5 km² by using the look-up table (LUT)-based separation technique. The radiative transfer model (RTM) was used for different models of atmosphere-ocean environmental conditions, taking into account the realistic variability of scattering and absorption. Ocean surface properties affected by whitecaps and pigment content were also taken into account. The results show that the radiance observed by the GOCI amounts to only 5% of the radiation that penetrated the ocean and, consequently, 95% of the radiation is scattered in the atmosphere or reflected at the ocean surface in the visible wavelengths longer than 0.6 ìm. Within these wavelengths, radiance variations at the top of atmosphere (TOA) due to pigment variations are within 10%, while the radiance variation due to wind speed is considerably higher. For verification of GOCI-retrieved AOTs, comparison between GOCI and ground-based sunphotometer measurement at Gosan, Korea (126.10°E, 33.23°N)) showed good correlation (r = 0.99). The GOCI observations obtained by using the proposed technique showed promising results for the daily monitoring of atmospheric aerosol loading as well as being useful for environmental supervisory authorities.     

Analytical study on vulnerability functions for casualty estimation in the collapse of adobe buildings induced by earthquake

Collapse of adobe buildings during an earthquakes with various earthquake intensities is analyzed using the 3-dimensional distinct element method code developed by the first author. Firstly, we evaluate structural damage with damage index, interior-space damage with w score, and human casualties in the collapsing buildings with three casualty criteria. Secondly, we investigate relationships between the earthquake intensity, the structural damage, the interior-space damage, and the casualties. It is found that the casualties have stronger correlation with the interior-space damage than the structural damage, and three vulnerability functions, namely, structural, interior-space and casualty vulnerability functions, are proposed. Effects of reinforcing methods on these functions are also examined. Finally, a series of analytical procedures to develop vulnerability functions and to estimate casualties using the functions are described.     

Incorporation of Heavy Metals Bioavailability into Risk Characterization

The bioavailability of field‐aged Cd and Cu was calculated, and compared to the total concentrations determined by acid digestion. Only 0.60–4.15% for Cd and 0.59–9.43% for Cu were found to be bioavailable when determined by stomach‐phase extraction. The incorporation of bioavailability reduced more than 90% of the calculated risk of the metals at the site of study. It should be noted that such a reduction may not be generalized and the site‐specific bioavailability needs to be determined case by case.     

Seismic response of steel structures with seesaw systems using viscoelastic dampers

Vibration control systems are being used increasingly worldwide to provide enhanced seismic protection for new and retrofitted buildings. This paper presents a new vibration control system on the basis of a seesaw mechanism with viscoelastic dampers. The proposed vibration control system comprises three parts: brace, seesaw member, and viscoelastic dampers. In this system, only tensile force appears in bracing members. Consequently, the brace buckling problem is negligible, which enables the use of steel rods for bracing members. By introducing pre‐tension in rods, long steel rods are applicable as bracing between the seesaw members and the moment frame connections over some stories. Seesaw mechanisms can magnify the damper deformation according to the damper system configuration. In this paper, first, the magnification factor, that is, the ratio of the damper deformation to the story drift, is delivered, which includes the rod deformation. Results of a case study demonstrate that the magnification factor of the proposed system is greater than unity for some cases. Seismic response analysis is conducted for steel moment frames with the proposed vibration control system. Energy dissipation characteristics are examined using the time‐history response results of energy. The maximum story drift angle distributions and time‐history response results of displacement show that the proposed system can reduce the seismic response of the frames effectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Flow of a stratified fluid bounded by walls of finite thermal conductance

Abstract

A study is made of the behavior of a thermally stratified fluid in a container when the non-horizontal boundaries have finite thermal conductance. The theory of Rahm and Walin is briefly recounted. Numerical solutions to the Navier-Stokes equations for a Boussinesq fluid in a cylinder, adopting a Newtonian heat flux condition at the vertical sidewall, are presented. Results on the details of flow and temperature fields are given over ranges of the Rayleigh number Ra, the container aspect ratio H, and the sidewall conductance S. As S increases, the isotherms in the meridional plane are horizontal at small radii but they diverge at large radii. This creates temperature nonuniformilies in the horizontal direction, and convective motions result. The salient features of the interior temperature profiles are captured by the theoretical model. The velocity field is characterized by two oppositely-directed circulations. As Ra or S varies, the qualitative circulation patterns remain substantially unchanged, but the magnitudes of the convective flows differ by large amounts. The effects of the externally-imposed parameters on the flow and temperature structures are examined.     

Impact of loading displacements on SLR-derived parameters and on the consistency between GNSS and SLR results

Displacements of the Earth’s surface caused by tidal and non-tidal loading forces are relevant in high-precision space geodesy. Some of the corrections are recommended by the international scientific community to be applied at the observation level, e.g., ocean tidal loading (OTL) and atmospheric tidal loading (ATL). Non-tidal displacement corrections are in general recommended not to be applied in the products of the International Earth Rotation and Reference Systems Service, in particular atmospheric non-tidal loading (ANTL), oceanic and hydrological non-tidal corrections. We assess and compare the impact of OTL, ATL and ANTL on SLR-derived parameters by reprocessing 12 years of SLR data considering and ignoring individual corrections. We show that loading displacements have an influence not only on station long-term stability, but also on geocenter coordinates, Earth Rotation Parameters, and satellite orbits. Applying the loading corrections reduces the amplitudes of annual signals in the time series of geocenter and station coordinates. The general improvement of the SLR station 3D coordinate repeatability when applying OTL, ATL and ANTL corrections are 19.5 %, 0.2 % and 3.3 % respectively, w.r.t. the solutions without loading corrections. ANTL corrections play a crucial role in the combination of optical (SLR) and microwave (GNSS, VLBI, DORIS) space geodetic observation techniques, because of the so-called Blue-Sky effect: SLR measurements can be carried out only under cloudless sky conditions—typically during high air pressure conditions, when the Earth’s crust is deformed, whereas microwave observations are weather-independent. Thus, applying the loading corrections at the observation level improves SLR-derived products as well as the consistency with microwave-based results. We assess the Blue-Sky effect on SLR stations and the consistency improvement between GNSS and SLR solutions when ANTL corrections are included. The omission of ANTL corrections may lead to inconsistencies between SLR and GNSS solutions of up to 2.5 mm for inland stations. As a result, the estimated GNSS–SLR coordinate differences correspond better to the local ties at the co-located stations when applying ANTL corrections.     

Possibilities of GPS kinematic measurements for geological survey in East Slovakia

This paper deals with transformation procedures for observed GPS data from the world geodetic system WGS-84 into the national geodetic grid datum S-UTCN (system of united trigonometric cadaster network) and Baa (the Baltic Sea after adjustment). Transformation from WGS-84 into SUTCN is performed most frequently by means of the 7-element Helmert transformation with three identical points. Geodetic network was adjusted by two ways.     

Screening of extraction methods for Cd and As bioavailability prediction in rhizospheric soil using multivariate analyses

Heavy metals in tailings and mining wastes from abandoned mines can be released into adjacent agricultural field and bioaccumulated in crops or vegetables. Therefore, prediction of metal bioavailability has become an important issue to prevent adverse effect of bioaccumulated metals on human health. In this study, single and sequential extraction methods were compared using multivariate analysis to predict the bioavailability of Cd and As in contaminated rhizosphere soils. Single extraction using 0.1 M HCl for Cd and 1.0 M HCl for As had an extraction efficiency of 8–12% for soil Cd and 14–17% for soil As compared to total concentration extracted with aqua regia. Using sequential extraction, Fe–Mn-bound Cd (FR3) and residual Cd (FR5) were the dominant fractions representing 43 and 41% of total Cd concentration. For As, the strongly absorbed form (FR2) was the most abundant chemical fraction showing 45–54% of the total As concentration in soil. Multivariate analyses showed that single extraction with HCl and total concentration of Cd and As in soil were significantly correlated to potato and green onion plant tissue metal concentration. Although little information was obtained with multiple regression analysis because of multicollinearity of variables, the result of principle component analysis (PCA) revealed that the highest positive loading was obtained using total concentration of Cd and As in soil in the first principle component (PC1). In addition, total concentration of Cd and As in soil was independently grouped with other chemical fractions by cluster analysis. Therefore, the overall result of this research indicated that total concentrations of Cd and As in rhizosphere soils were the best predictors of bioavailability of heavy metals in these contaminated soils.     

Evidence for significant clockwise rotations of the Korean Peninsula during Cretaceous

In an effort to evaluate the Cretaceous magnetostratigraphy for the Korean Peninsula and to establish the tectonic coherence of its various elements, we collected paleomagnetic data from 121 samples from 20 sites within the Chilgok Formation (108.3–109.9 Ma) in the Gyeongsang Basin. Together with previously published data, we evaluate the results from a total of 163 sites in the basin.We combine our age model with results from recent stratigraphic, paleomagnetic and radiometric geochemical studies. In this study, we found that two distinct declination shifts decrease with younging direction, indicating two clockwise rotational events of the Korean Peninsula with respect to the Eurasia continent. The earlier event took place during 130–100 Ma (Phase I, newly termed “Goguryeo Disturbance”) and a later one during 80–50 Ma (Phase III, belonging to “Bulguksa Orogeny”). The mean rotation rate in the interval from 115.2 to 103.8 Ma (Phase I) is about 0.74°/Ma, while the rate from 90.9 to 79.8 Ma (Phase II) is 0.19°/Ma. Based on paleolatitude change during Phase I, we infer that the Korean Peninsula (eastern part of the Sino-Korea Block) migrated southward about 300 km after the complete amalgamation of the Sino-Korea Block into the Eurasian continent resulting in N–S compression within the Korean peninsula and Manchuria. Large-scale strike-slip faults (e.g., Tan-Lu Fault, Okcheon Boundary Fault) were probably rejuvenated in the Sino-Korea Block during Phase I.     

Carbon isotope composition of Upper Cambrian to Lower Ordovician carbonate in Korea,and its bearing on the Cambrian–Ordovician boundary and Lower Ordovician paleoceanography

This study presents an example of locating Cambrian–Ordovician boundary in the lower Paleozoic carbonate succession in Korea using carbon isotope stratigraphy. The Yeongweol Unit of the lower Paleozoic Joseon Supergroup comprises the Upper Cambrian Wagok Formation and the Lower Ordovician Mungok Formation in the Cambrian–Ordovician transition interval. Conventionally, the boundary was placed at the lithostratigraphic boundary between the two formations. This study reveals that the boundary is positioned in the basal part of the Mungok Formation based on the carbon isotope stratigraphy coupled with biostratigraphic information of conodont and trilobite faunas. The δ¹³C curve of the Lower Ordovician Mungok Formation shows a similar trend to that of the coeval stratigraphic interval of Argentine Precordillera (Buggisch et al., 2003), suggesting that the δ¹³C curve of the Mungok Formation reflects the Early Ordovician global carbon cycle.