High-temperature thermal expansion and elasticity of calcium-rich garnets

We present new high temperature elasticity data on two grossular garnet specimens. One specimen is single-crystal, of nearly endmember grossular, the other is polycrystalline with about 22% molar andradite. Our data extend the high temperature regime for which any garnet elasticity data are available from 1000 to 1350 K and the compositional range of temperature data to near endmember grossular. We also present new data on the thermal expansivity of calcium-rich garnet. We find virtually no discernable differences in the temperatureT derivatives at ambient conditions of the isotropic bulkK _S and shearμ moduli when comparing our results between these two specimens. These calcium-rich garnets have the lowest values of ¦(?K _S /?T) _P ¦ = (1.47,1.49) x 10^-2GPa/K, and among the highest values of ¦(?μ/?T) _P ¦ = 1.25 x 10^-2GPa/K, when compared with other garnets. Small, but measurable, nonlinear temperature dependences of most of the elastic moduli are observed. Several dimensionless parameters are computed with the new data and used to illustrate the effects of different assumptions on elastic equations of state extra-polated to high temperatures. We discuss how dimensionless parameters and other systematic considerations can be useful in estimating the temperature dependence of some properties of garnet phases for which temperature data are not yet available. While we believe it is premature to quantitatively predict the temperature variation ofK _S andμ for majorite garnets, our results have bearing on the amount of diopside required to explain the shear velocity gradients in Earth's transition zone.     

Alvin-SeaBeam studies of the Sumisu Rift, Izu-Bonin arc

Bimodal volcanism, normal faulting, rapid sedimentation, and hydrothermal circulation characterize the rifting of the Izu-Bonin arc at 31°N. Analysis of the zigzag pattern, in plan view, of the normal faults that bound Sumisu Rift indicates that the extension direction (080° ± 10°) is orthogonal to the regional trend of the volcanic front. Normal faults divide the rift into an inner rift on the arc side, which is the locus for maximum subsidence and sedimentation, and an outer rift further west. Transfer zones that link opposing master faults and/or rift flank uplifts further subdivide the rift into three segments along strike. Volcanism is concentrated along the ENE-trending transfer zone which separates the northern and central rift segments. The differential motion across the zone is accommodated by interdigitating north-trending normal faults rather than by ENE-trending oblique-slip faults. Volcanism in the outer rift has built 50–700 m high edifices without summit craters whereas in the inner rift it has formed two multi-vent en echelon ridges (the largest is 600 m high and 16 km long). The volcanism is dominantly basaltic, with compositions reflecting mantle sources little influenced by arc components. An elongate rhyolite dome and low-temperature hydrothermal deposits occur at the en echelon step in the larger ridge, which is located at the intersection of the transfer zone with the inner rift. The chimneys, veins, and crusts are composed of silica, barite and iron oxide, and are of similar composition to the ferruginous chert that mantles the Kuroko deposits. A 1.2-km transect of seven alvin heat flow measurements at 30°48.5′N showed that the inner-rift-bounding faults may serve as water recharge zones, but that they are not necessarily areas of focussed hydrothermal outflow, which instead occurs through the thick basin sediments. The rift basin and arc margin sediments are probably dominated by permeable rhyolitic pumice and ash erupted from submarine arc calderas such as Sumisu and South Sumisu volcanoes.     

Acetylene reducing activity at a tropical seagrass bed in Papua New Guinea

Acetylene reduction activity at a tropical seagrass bed in Papua New Guinea was studied. Blades of every species of seagrass studied (Enhalus acoroides, Thalassia hemprichii, Halodule uninervis, Syringodium isoetifolium) at the bed showed active acetylene reduction in the rage of 0.025–0.050 mol cm^–2d^–1. It is suggested that epiphytic blue-green algae would be responsible for active acetylene reduction. Acetylene reducing activity was observed also at rhizosphere of seagrasses, microbial communities on the detritus and periphyton on snail shells. It is estimated that total nitrogen fixed at the seagrass bed will be equivalent to 6.7% of that required for the growth of seagrasses.     

Spatial and temporal variations in free polyamine distributions in Uranouchi Inlet, Japan

Polyamines are an essential component of living organisms that influence normal cell growth and development. Despite the possible importance of polyamines for marine microbial ecology, concentrations of polyamines in seawater are not well known.Using HPLC analysis with a cation exchange column and OPA reagent, we determined polyamine concentrations in seawater without carrying out desalting, concentration or derivatization steps prior to chromatography.In seawater collected from Uranouchi Inlet, putrescine and spermidine were the predominant polyamines, ranging from undetectable (N.D.) to 4.4 nM and N.D. to 2.8 nM, respectively. Though other polyamines were detected, the frequency of detection was much lower than that of putrescine and spermidine; concentrations ranged from N.D. to 0.9 nM for cadaverine, and N.D. to 3.2 nM for norspermidine. Norspermine and spermine were detected in only a few samples; their concentrations varied from N.D. to 3.2 nM and N.D. to 0.5 nM, respectively. These concentrations were higher in the summer.     

Characteristics of turbulent boundary layers over a rough bed under saw-tooth waves and its application to sediment transport

A large number of studies have been done dealing with sinusoidal wave boundary layers in the past. However, ocean waves often have a strong asymmetric shape especially in shallow water, and net of sediment movement occurs. It is envisaged that bottom shear stress and sediment transport behaviors influenced by the effect of asymmetry are different from those in sinusoidal waves. Characteristics of the turbulent boundary layer under breaking waves (saw-tooth) are investigated and described through both laboratory and numerical experiments. A new calculation method for bottom shear stress based on velocity and acceleration terms, theoretical phase difference, φ and the acceleration coefficient, a_c expressing the wave skew-ness effect for saw-tooth waves is proposed. The acceleration coefficient was determined empirically from both experimental and baseline k–ω model results. The new calculation has shown better agreement with the experimental data along a wave cycle for all saw-tooth wave cases compared by other existing methods. It was further applied into sediment transport rate calculation induced by skew waves. Sediment transport rate was formulated by using the existing sheet flow sediment transport rate data under skew waves by Watanabe and Sato [Watanabe, A. and Sato, S., 2004. A sheet-flow transport rate formula for asymmetric, forward-leaning waves and currents. Proc. of 29th ICCE, ASCE, pp. 1703–1714.]. Moreover, the characteristics of the net sediment transport were also examined and a good agreement between the proposed method and experimental data has been found.     

Isotopic composition of dissolved inorganic carbon in subsurface sediments of gas hydrate-bearing mud volcanoes, Lake Baikal: implications for methane and carbonate origin

We report on the isotopic composition of dissolved inorganic carbon (DIC) in pore-water samples recovered by gravity coring from near-bottom sediments at gas hydrate-bearing mud volcanoes/gas flares (Malenky, Peschanka, Peschanka 2, Goloustnoe, and Irkutsk) in the Southern Basin of Lake Baikal. The δ¹³C values of DIC become heavier with increasing subbottom depth, and vary between ?9.5 and +21.4‰ PDB. Enrichment of DIC in ¹³C indicates active methane generation in anaerobic environments near the lake bottom. These data confirm our previous assumption that crystallization of carbonates (siderites) in subsurface sediments is a result of methane generation. Types of methanogenesis (microbial methyl-type fermentation versus CO₂-reduction) were revealed by determining the offset of δ¹³C between dissolved CH₄ and CO₂, and also by using δ¹³C and δD values of dissolved methane present in the pore waters. Results show that both mechanisms are most likely responsible for methane generation at the investigated locations.     

AFM study on surface nanotopography of matrix olivines in Allende carbonaceous chondrite

By means of nanoscale surface observation, we have proposed a new approach for investigating fine crystals of cosmic materials to reveal their origin and growth conditions. Several different morphologies of polyhedral fine olivines with faceted faces have been found in Allende carbonaceous chondrite (4.5 byr in geochronological age). In the present work, molecular level topography of the faceted matrix olivine by Atomic Force Microscopy (AFM) has successfully been performed. The matrix olivine found to have preserved growth step pattern on its surface even though quite long time has passed since they formed in the early Solar System. The surface pattern suggests that the faceted matrix olivine could have been condensed from the gas phase, and possibly that these olivine crystals had continued to grow under a rapid cooling condition (0.1-1 K s⁻¹). The estimated cooling rate agrees well with predictions based on hypothetical rapid heating and cooling events such as shock wave heating.     

Thermochronology for the Granitic Pluton Related to Lead-Zinc Mineralization in Tsushima, Japan

Abstract: K–Ar datings and oxygen isotope analyses revealed a cooling history of the Uchiyama granitic pluton, which is genetically related to the Pb-Zn deposits (Taishu mine) in the Tsushima Islands, Japan. The pluton intrudes into the Paleogene Taishu Group to form the biotite-hornfels zone, while the Taishu vein-type Pb–Zn deposits occur in fissures developed in the non-hornfels zone about 1 to 3 km westward from the contact. Amphibole and biotite K-Ar ages of the pluton have a wide range from 19 to 13 Ma. Oxygen isotopes of the biotite and coexisting quartz grains indicate that isotopic exchange reactions have occurred under subsolidus conditions, and that the K-Ar ages are affected by various cooling rates in the pluton. The mineralization age of the Taishu ore deposits is obtained for the first time to be 15.40.8 Ma by a K-Ar age of 2 M ₁–muscovite in a calcite–quartz–muscovite–chlorite veinlet of the Shintomi orebody. Whole rock K-Ar ages of biotite-hornfels near the pluton represent similar ages to the ore deposits. Using blocking temperature calculated from reported diffusivity for argon, the pluton was cooled from 560 to 350C in the period of 17 to 14 Ma. The vein formation took place after the time when temperature in wall rocks of the pluton had dropped below the brittle-plastic transition (about 400C). These results imply that the cooling of the pluton has caused injection of magmatic fluids into meteoric hydrothermal systems, and the Pb-Zn mineralization has occurred due to this mixing at the age of about 15 Ma.     

THREE NEW GSJ ROCK REFERENCE SAMPLES: RHYOLITE JR-3, GABBRO JGB-2 AND HORNBLENDITE JH-1

Three new rock reference samples, Rhyolite JR-3, Gabbro JGb-2 and Hornblendite JH-1 have been prepared by the Geological Survey of Japan for collaborative studies on their chemical composition. Twenty-eight major, minor and trace elements were determined and presented. The results of homogeneity tests showed that all elements are considered to be distributed homogeneously in each reference sample. Geological and mineralogical characteristics are also described.     

A thermodynamic theory of the Grüneisen ratio at extreme conditions: MgO as an example

The Grüneisen ratio, γ, is defined as γy=αK _TV/C_v. The volume dependence of γ(V) is solved for a wide range in temperature. The volume dependence of αK _T is solved from the identity (? ln(αK _T)/? ln V)T ≡ δ _T-K′. α is the thermal expansivity; K _T is the bulk modulus; C _V is specific heat; and δ _Tand K′ are dimensionless thermoelastic constants. The approach is to find values of δ _T and K′, each as functions of T and V. We also solve for q=(? ln γ/? ln V) where q=δ _T -K′+ 1-(? ln C _V/? ln V)T. Calculations are taken down to a compression of 0.6, thus covering all possible values pertaining to the earth's mantle, q=? ln γ/? ln V; δ _T=? ln α/? ln V; and K′= (?K _T/?P)T. New experimental information related to the volume dependence of δ _T, q, K′ and C _V was used. For MgO, as the compression, η=V/V ₀, drops from 1.0 to 0.7 at 2000 K, the results show that q drops from 1.2 to about 0.8; δ _T drops from 5.0 to 3.2; δ _T becomes slightly less than K′; ? ln C _V/? In V→0; and γ drops from 1.5 to about 1. These observations are all in accord with recent laboratory data, seismic observations, and theoretical results.