Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002     

地球物理现象和太阳活动中的高频振荡

本文用几种谱分析方法了从１９７６年７月－１９９２年９月期间的地球物理资料（日长变化，大气角动量）和太阳活动及１９７６年７月－１９８７年１２月的日冕指数。结果证实所有序列中呈现出４０－６０天的振荡，同时也表明：它们的振幅和周期是随时间变化的。本文研究了谱结构的时空分布和讨论地球物理象与太阳活动之间的可能联系。     

The Hα-cyclonic spectra of a flare loop system on 1981 April 27

The data such as the H-spectrum-spectroheliographic (SSHG) observations, the H-chromospheric observations, etc., of a flare loop prominence which occurred on the western solar limb on 1981 April 27 have been obtained at Yunnan Observatory. The distribution of the internal motions and the macroscopical motion of the flare loop prominence with time and space in the course of its eruption and ascension is derived from the comprehensive analysis of the data. The possible physical pictures and the instability of the motions of the loop are inferred and discussed.     

内蒙古羊蹄子山-磨石山钛矿床锐钛矿、金红石和钛铁矿的矿物学特征

羊蹄子山-磨石山钛矿床的钛矿物主要为锐钛矿、金红石和钛铁矿。锐钛矿化学成分的特点是FeO含量明显比金红石要低;主要X光粉晶谱线为3.518(100)、2.377(14)和1.667(11);晶胞参数a()=3.786,c()=9.513;拉曼光谱谱线(cm-1)为516、395、195和143。金红石的主要X光粉晶谱线为3.250(100)、1.688(40)和2.488(29);晶胞参数为a()=4.595,c()=2.962;拉曼光谱谱线(cm-1)为610和446。钛铁矿的成分特点是富锰贫镁,与攀西地区岩浆型钒钛磁铁矿矿床中的钛铁矿正好相反。所有上述钛(铁)氧化物矿物学特征,进一步说明该矿床是在中元古代在海底与基性火山活动有关的热水沉积后经区域变质和局部又遭受后期热液改造而成。     

Wind wave-forced fine sediment erosion during the slack water periods in Hangzhou Bay,China

The shallow water wave simulation model-SWAN incorporated with a simple fine sediment erosion model is applied to Hangzhou Bay, China, to model the horizontal distribution of the maximum bottom orbital velocity and corresponding fine sediment erosion rates induced by: (1) southeasterly steady winds (5, 20 and 30 m/s), (2) southwesterly steady winds (5 and 20 m/s); (3) northwesterly steady winds (5 and 20 m/s); (4) east-southeasterly steady winds (5 and 20 m/s); (5) easterly steady winds (5 and 20 m/s) under closed and unclosed boundaries; and (6) unsteady winds during the slack water periods. Results suggest: (1) the steady wind wave-induced maximum bottom orbital velocities and corresponding fine sediment erosion rates generally increased with the increasing steady winds; (2) closed and unclosed boundary conditions had more significant influences on modeled fine sediment erosion rates under 5 m/s easterly steady winds than 20 m/s; and (3) steady and unsteady wind wave-induced maximum bottom currents could be significant in eroding fine sediment bed in Hangzhou Bay. The results show implications for geomorphology, sedimentology, coastal erosion, and environmental pollution mitigation in Hangzhou Bay.     

东营凹陷北部沙河街组四段深部储层多重成岩环境及演化模式

主要通过薄片鉴定、扫描电镜观察、包裹体分析、粘土矿物分析、镜质体反射率测试和岩心物性分析等手段,结合构造发育史和有机质热演化史等研究成果,以揭示东营凹陷北带古近系深部碎屑岩储层成岩环境及演化模式为目的展开研究工作。结果表明:东营凹陷北带古近系深部碎屑岩储层存在酸性、碱性和酸性碱性交替等多重成岩环境。酸性成岩环境以碳酸盐矿物溶解、长石溶解蚀变为高岭石并伴生石英次生加大等为标志,碱性成岩环境以石英质颗粒及其次生加大边溶解、长石次生加大和晚期碳酸盐矿物沉淀为标志。研究区古近系深部碎屑岩储层成岩环境由浅至深大致经历了碱性—酸性—酸性碱性交替(局部碱性较强)—碱性—弱碱性的演化过程,并建立了沙河街组四段的成岩演化和储层改造模式。     

等温微量热法在土壤微生物研究方面的进展

土壤微生物是陆地生态系统中分解者亚系统的主要组成部分, 参与了包括有机质降解、营养转化、 植物生长的促进或抑制以及各种土壤物理过程在内的一系列反应活动. 土壤微生物则是土壤质量重要的生物指标, 可以用来监控土壤质量的变化. 等温微量热法是一种简便、快速地测量微生物活性的方法, 在土壤微生物代谢热效应的研究领域中广泛应用. 就等温微量热法在土壤微生物活性中的研究进展进行综述: 等温微量热法的简介, 微量热方法与传统方法的比较, 等温微量热法在各种外界环境和土壤条件影响下的土壤微生物活性研究中的应用, 并对等温微量热法在土壤微生物和其它方面的研究进行了展望.     

新疆北部晚古生代以来中基性岩脉的年代学、岩石学、地球化学研究

新疆北部中基性岩脉K-Ar表观年龄为187～271Ma,岩性以辉长、辉绿岩以及闪长、闪长玢岩为主,属于亚碱性系列.主量元素、稀土元素以及微量元素分析表明,中基性岩脉经历了源区地壳物质的混合以及侵位过程中的分离结晶作用,并在区域分布特点上受部分熔融程度的影响,而且由于结晶分异和部分熔融的不同,还出现了中基性岩脉系列的成分变异.排除上述岩浆作用的干扰,有证据显示岩脉起源于亏损地幔,由于Nd同位素模式年龄tDM集中在363～769Ma,反映源区是一个古生代时期的新生岩石圈地幔,该地幔源区属于大洋岩石圈地幔.新疆北部广泛出露的中基性岩脉在时间和空间上具有多样性,但是在产状、岩性组合和同位素特征上具有相似的特点,指示研究区在古生代以来具有一个相对统一和完整的源区,推测这个源区与北疆地区古生代以来长期存在的残余洋盆及其相关岩石圈有关.