Geomorphic features extraction from high-resolution topography: landslide crowns and bank erosion

In recent years, new remote-sensed technologies, such as airborne and terrestrial laser scanner, have improved the detail and the quality of topographic information, providing topographical high-resolution and high-quality data over larger areas better than other technologies. A new generation of high-resolution (≤3 m) digital terrain models (DTMs) is now available for different areas and is widely used by researchers, offering new opportunities for the scientific community. These data call for the development of a new generation of methodologies for an objective extraction of geomorphic features, such as channel heads, channel networks, bank geometry, debris-flow channel, debris-flow deposits, scree slope, landslide and erosion scars, etc. A high-resolution DTM is able to detect the divergence/convergence of areas related to unchannelized/channelized processes with better detail than a coarse DTM. In this work, we tested the performance of new methodologies for an objective extraction of geomorphic features related to shallow landsliding processes (landslide crowns), and bank erosion in a complex mountainous terrain. Giving a procedure that automatically recognizes these geomorphic features can offer a strategic tool to map natural hazard and to ease the planning and the assessment of alpine regions. The methodologies proposed are based on the detection of thresholds derived by the statistical analysis of variability of landform curvature. The study was conducted on an area located in the Eastern Italian Alps, where an accurate field survey on shallow landsliding, erosive channelized processes, and a high-quality set of both terrestrial and airborne laser scanner elevation data is available. The analysis was conducted using a high-resolution DTM and different smoothing factors for landform curvature calculation in order to test the most suitable scale of curvature calculation for the recognition of the selected features. The results revealed that (1) curvature calculation is strongly scale-dependent, and an appropriate scale for derivation of the local geometry has to be selected according to the scale of the features to be detected; (2) such approach is useful to automatically detect and highlight the location of shallow slope failures and bank erosion, and it can assist the interpreter/operator to correctly recognize and delineate such phenomena. These results highlight opportunities but also challenges in fully automated methodologies for geomorphic feature extraction and recognition.     

Antigorite equation of state and anomalous softening at 6 GPa: an in situ single-crystal X-ray diffraction study

The compressibility of antigorite has been determined up to 8.826(8) GPa, for the first time by single crystal X-ray diffraction in a diamond anvil cell, on a specimen from Cerro del Almirez. Fifteen pressure–volume data, up to 5.910(6) GPa, have been fit by a third-order Birch–Murnaghan equation of state, yielding V ₀ = 2,914.07(23) Å³, K _T0 = 62.9(4) GPa, with K′ = 6.1(2). The compression of antigorite is very anisotropic with axial compressibilities in the ratio 1.11:1.00:3.22 along a, b and c, respectively. The new equation of state leads to an estimation of the upper stability limit of antigorite that is intermediate with respect to existing values, and in better agreement with experiments. At pressures in excess of 6 GPa antigorite displays a significant volume softening that may be relevant for very cold subducting slabs.     

Effects of capillary reflection in the performance of the collimator of the Large Area Detector on board LOFT

The Large Observatory For X-ray Timing (LOFT) is one of the candidate missions selected by the European Space Agency for an initial assessment phase in the Cosmic Vision programme. It is proposed for the M3 launch slot and has broad scientific goals related to fast timing of astrophysical X-ray sources. LOFT will carry the Large Area Detector (LAD), as one of the two core science instruments, necessary to achieve the challenging objectives of the project. LAD is a collimated detector working in the energy range 2-50 keV with an effective area of approximately 10 m ²at 8 keV. The instrument comprises an array of modules located on deployable panels. Lead-glass microchannel plate (MCP) collimators are located in front of the large-area Silicon Drift Detectors (SDD) to reduce the background contamination from off-axis resolved point sources and from the diffuse X-ray background. The inner walls of the microchannel plate pores reflect grazing incidence X-ray photons with a probability that depends on energy. In this paper, we present a study performed with an ad-hoc simulator of the effects of this capillary reflectivity on the overall instrument performance. The reflectivity is derived from a limited set of laboratory measurements, used to constrain the model. The measurements were taken using a prototype collimator whose thickness is similar to that adopted in the current baseline design proposed for the LAD. We find that the experimentally measured level of reflectivity of the pore inner walls enhances the off-axis transmission at low energies, producing an almost flat-top response. The resulting background increase due to the diffuse cosmic X-ray emission and sources within the field of view does not degrade the instrument sensitivity.     

Much damage for little advantage: Field studies and morphodynamic modelling highlight the environmental impact of an apparently minor coastal mismanagement

While coastal management activities have long been known to exert a strong influence on the health of marine ecosystems, neither scientists nor administrators have realized that small interventions may lead to disproportionately larger impacts. This study investigated the broad and long-lasting environmental consequences of the construction of an ill-planned, although small (only 12 m long) jetty for pleasure crafts on the hydrodynamic conditions and on the meadow of the seagrass Posidonia oceanica of an embayed cove in the Ligurian Sea (NW Mediterranean). There, P. oceanica used to develop on a high (>1.5 m) matte (a lignified terrace causing seafloor elevation) in which the leaves reach the surface and form a compact natural barrier to waves in front of the beach. Such a so-called ‘fringing reef’ of P. oceanica is today recognized of high ecological value and specific conservation efforts are required. The construction of the jetty implied the cutting of the matte, which directly destroyed part of the fringing reef. In addition, meadow mapping and sedimentological analyses coupled with morphodynamic modelling showed that the ecosystem of the whole cove had been greatly altered by the jetty. We used the geometric planform approach, a proper tool in the study of headland-controlled embayment, both to characterise the present situation of Prelo cove and to simulate the original one, before the jetty was built. In the long term, such a small jetty completely altered the configuration and the hydrodynamic conditions of the whole cove, splitting the original pocket beach into two smaller ones and creating strong rip-currents flowing seaward along the jetty. These rip-currents enhanced erosion of residual shallow portions of the meadow and further modified the sedimentary fluxes in shallow waters. A century after the construction of the jetty, an irreversible environmental damage has occurred, as the slow growing rate of P. oceanica implies that the high matte terrace and the fringing reef will hardly form again, even after the removal of the jetty. The lesson learnt from this study is that even such small, and therefore reputed intrinsically ‘innocent’, interventions on the coastal zone require accurate planning based on interdisciplinary studies to understand and respect the delicate interplay among morphological, hydrodynamic and ecological components.     

Sediment trace metals and PCB input history in Lake Anna, Virginia, USA

Damming of the North Anna River in 1972 created Lake Anna, a cooling water source for the Dominion nuclear power plant as well as a popular recreation site in Spotsylvania and Orange counties, Virginia, USA. Previously dated (210-Pb) sediment cores from seven locations within the lake and three locations in the adjoining Waste Heat Treatment Facilities (WHTF) were analyzed for trace metals (Al, Ba, Zn, Cd, Cu, Fe, Mn and Pb) and polychlorinated biphenyls (PCBs) to examine the environmental evolution of the reservoir system. The reservoir has a history of mining activities in its watershed and unusually elevated concentrations of PCBs were found in fish tissues from previous studies. Therefore, dated sediment cores provided the framework for both the temporal and spatial analysis of possible sources and flux histories for both trace metals and PCBs. The trace metals results suggest that, though the upper reaches are relatively less impacted, the old mine tailings from the now ceased mining activities in the watershed of Contrary Creek tributary continue to dominate the sediment chemistry of the lower portion of the lake basin, signified by sediment enrichment of Pb, Cd, Cu, and Zn. Lagoon-2 of the WHTF also seems to be receiving unusually high loadings of Cd (12.5 ± 1.07 μg/g) that is probably associated with waste materials from the nuclear power plant that maintains the lagoons. PCB sediment concentrations were relatively low in the lower sections of the basins with values typically being <3.5 ng/g. The upper reaches of the basin had several PCB hotspots, with the surface sediments of Terry’s Run tributary having values as high as 53.13 ng/g. The spatial distribution of PCBs seems to suggest the upper reaches of the basin as the probable source, with the unusually high concentrations near bridges suggesting a possible link between the PCBs and old bridge fill materials. The oldest lacustrine sediments also had relatively high trace metals and PCB values signifying a probable role of soil disruption and sediment reconcentration during reservoir construction.     

High‐P tectono‐metamorphic evolution of mylonites from the Variscan basement of the Northern Apennines,Italy

Strain localization within shear zones may partially erase the rock fabric and the metamorphic assemblage(s) that had developed before the mylonitic event. In poly‐deformed basements, the loss of information on pre‐kinematic phases of mylonites hinders large‐scale correlations based on tectono‐metamorphic data. In this study, devoted to a relict unit of Variscan basement reworked within the nappe stack of the Northern Apennines (Italy), we investigate the possibility to reconstruct a complete pressure (P)–temperature (T)–deformation (D) path of mylonitic micaschist and amphibolite by integrating microstructural analysis, mineral chemistry and thermodynamic modelling. The micaschist is characterized by a mylonitic fabric with fine‐grained K‐white mica and chlorite enveloping mica‐fishes, quartz, and garnet pseudomorphs. Potassic white mica shows Mg‐rich cores and Mg‐poor rims. The amphibolite contains green amphibole+plagioclase+garnet+quartz+ilmenite defining S₁ with a superposed mylonitic fabric localized in decimetre‐ to centimetre‐scale shear zones. Garnet is surrounded by an amphibole+plagioclase corona. Phase diagram calculations provide P–T constraints that are linked to the reconstructed metamorphic‐deformational stages. For the first time an early high‐P stage at >11 kbar and 510°C was constrained, followed by a temperature peak at 550–590°C and 9–10 kbar and a retrograde stage (<475°C, <7 kbar), during which ductile shear zones developed. The inferred clockwise P–T–D path was most likely related to crustal thickening by continent‐continent collision during the Variscan orogeny. A comparison of this P–T–D path with those of other Variscan basement occurrences in the Northern Apennines revealed significant differences. Conversely, a correlation between the tectono‐metamorphic evolution of the Variscan basement at Cerreto pass, NE Sardinia and Ligurian Alps was established.     

A preparatory study on subsurface exploration on Mars using GPR and microwave tomography

The exploitation of ground penetrating radar in Mars subsurface exploration is becoming assessed in remote sensing observations and is of timely interest for high resolution in situ prospecting of the first meters of the underground.In this framework, we deal with a novel processing approach based on microwave tomography. Aiming to achieve accurate and reliable “images” of the investigated subsurface region in order to detect, localize and possibly determine the extent and the geometrical features of the embedded layers while reducing at the minimum possible the “interpretation” of the diagnostics result.The feasibility of the microwave tomographic approach has been tested in realistic cases dealing with conditions analogue to the Mars subsurface ones. In particular, we will present the tomographic reconstruction results achieved by experimental data collected in a field survey at Svalbard Islands (Norway) with a time-domain GPR.     

Single-crystal polarized FTIR spectroscopy and neutron diffraction refinement of cancrinite

We relate a single-crystal FTIR (Fourier transform infrared) and neutron diffraction study of two natural cancrinites. The structural refinements show that the oxygen site of the H₂O molecule lies off the triad axis. The water molecule is almost symmetric and slightly tilted from the (0001) plane. It is involved in bifurcated hydrogen bridges, with Ow···O donor–acceptor distances >2.7 Å. The FTIR spectra show two main absorptions. The first at 3,602 cm^?1 is polarized for E ⊥ c and is assigned to the ν₃ mode. The second, at 3,531 cm^?1, is also polarized for E ⊥ c and is assigned to ν₁ mode. A weak component at 4,108 cm^?1 could possibly indicate the presence of additional OH groups in the structure of cancrinite. Several overlapping bands in the 1,300–1,500 cm^?1 range are strongly polarized for E ⊥ c, and are assigned to the vibrations of the CO₃ group.     

An attenuation study using earthquakes from the 1997 Umbria-Marche sequence

We studied spatial and temporal characteristics of seismic attenuation inCentral Italy using S- and coda- waves recorded by the MarchesanSeismograph Network from earthquakes located in the epicentral area ofthe 1997 Umbria-Marche sequence. The amplitude decay of the S waveswith distance was defined calculating empirical attenuation functions at 15frequencies between 1 and 25 Hz. We analyzed separately foreshocks andaftershocks and we found the same attenuation functions, suggesting thatthe possible temporal variations could be confined in a small area. Thefrequency dependence of Q _S was approximated by the equation Q _S=18 · f ^2.0between 1 and 10 Hz. At higher frequencies (10–25 Hz), the frequencydependence of Q _s weakens, having an average value of Q _S=990. We also estimated Q from coda waves (Q _C) using the single-scattering models of Aki andChouet (1975) and Sato (1977). We found that Q _C=77 · f ^0.6, (between 2 and 20Hz) at the western side of the mountain chain, using either foreshocks oraftershocks. This relation is consistent with previous estimates of Q _Creported for the Central Apennines. For a volume sampling the Colfioritobasin, the Apennines and the Marche region we found that Q _C=55 · f ^0.8,indicating highattenuation below the mountain belt. To detect small temporal changes ofQ, we calculated spectral ratios of 5 temporal doublets located in theepicentral area and recorded at the closest station. We found temporalchanges of Q that vary from 27% to 56%, depending on the locationof the doublets. This variability suggests that the temporal change ofattenuation may depend on the spatial variation of Q and perhaps on thespatial distribution of tectonic stress in the epicentral area.