Community turnover provides insight into variable invertebrate recovery between restored streams with different integrated catchment management plans

ABSTRACT

Understanding temporal patterns in restored environments is important for identifying potential barriers to recovery and improved management of degraded habitats. In this paper, we use temporal beta diversity analyses to compare invertebrate community recovery trajectories in three restored agricultural stream sites under different integrated catchment plans, a native forest reference site, and two unmodified pasture control stream sites over 24 years. The restored sites diverged from their initial community composition over time and became more similar to the reference site community, which was relatively stable over time. Variation partitioning showed that prior to restoration beta diversity was primarily associated with environmental and spatial drivers, whereas post-restoration beta diversity was more influenced by temporal and environmental drivers, including changes in substrate size, fine sediments, water clarity, and nutrients, as well as temperature and flow regime. Species’ contributions to beta diversity varied between sites and years, with sensitive EPT taxa contributing more in reference and control sites. However, contributions of some EPT species, particularly mayflies, increased in restored sites post-ICM. In summary, after nearly two decades of ICM, restored stream sites show recovery towards reference conditions, yet differences persist, indicating that rehabilitation may take longer, depending on the restoration goals.     

Variability of organic δC and C/N in the Mersey Estuary, U.K. and its implications for sea-level reconstruction studies

Microfossil analysis (e.g. diatoms, foraminifera and pollen) represents the cornerstone of Holocene relative sea-level (RSL) reconstruction because their distribution in the contemporary inter-tidal zone is principally controlled by ground elevation within the tidal frame. A combination of poor microfossil preservation and a limited range in the sediment record may severely restrict the accuracy of resulting RSL reconstructions. Organic δ¹³C and C/N analysis of inter-tidal sediments have shown some potential as coastal palaeoenvironmental proxies. Here we assess their viability for reconstructing RSL change by examining patterns of organic δ¹³C and C/N values in a modern estuarine environment. δ¹³C and C/N analysis of bulk organic inter-tidal sediments and vegetation, as well as suspended and bedload organic sediments of the Mersey Estuary, U.K., demonstrate that the two main sources of organic carbon to surface saltmarsh sediments (terrestrial vegetation and tidal-derived particulate organic matter) have distinctive δ¹³C and C/N signatures. The resulting relationship between ground elevation within the tidal frame and surface sediment δ¹³C and C/N is unaffected by decompositional changes. The potential of this technique for RSL reconstruction is demonstrated by the analysis of part of an early Holocene sediment core from the Mersey Estuary. Organic δ¹³C and C/N analysis is less time consuming than microfossil analysis and is likely to provide continuous records of RSL change.     

The sea as a source of atmospheric phosphorus

The geochemical fractionation of phosphorus on the drop produced by bubbles bursting in seawater has been studied using a field sampling system called the Bubble Interfacial Microlayer Sampler (BIMS). The droplets from bursting bubbles were collected on filter samples in Narragansett Bay, Rhode Island during the summer of 1975. Phosphorus was found to be fractionated by the bubble-bursting process. The enrichment factor ranged from 4 to 170. Enrichment was found to increase with decreasing phosphorus concentration at 20 cm depth while it decreases with increasing wind velocity. Enrichment was independent of bubbling depth. Together these facts suggest that the sea-surface microlayer is the source of the phosphorus on the ejected drops. Organic phosphorus on the filter samples was found to be enriched relative to surface-water phosphorus by factors of 100–200, while reactive phosphorus was enriched by factors of only 6–8. This suggests that surface-active organic phosphorus compounds are the source phosphorus in the microlayer.The organic phosphorus content of samples of atmospheric particulates collected over the phosphate-rich upwelling waters near the Peru coast was found to correlate significantly with sea-salt sodium. Enrichments calculated using the average phosphorus concentration of the surface water in this area agree well with the results of the BIMS study. Thus it appears that phosphorus fractionation does occur in nature and may be important in supplying this nutrient to some coastal regions of the world.     

Solar flares: The impulsive phase

Only during the previous solar cycle have systematic observations begun to be made with the sensitivity and time resolution, and the continuous coverage required to catch the impulsive phase and measure the rapid variations present in many wavelength ranges. Observations in X-rays, gamma-rays, UV, H, and radio wavelengths all reveal rapid variations during the impulsive phase and have contributed to our understanding of the different phenomena involved. Results have been obtained from several spacecraft, from rocket and balloon flights, and from ground-based observations. These are reviewed in the context of a simple single loop flare model with a view to showing what results are consistent with this model and what the major problems are in our understanding of the impulsive phase. New instrumentation planned for observations during the present Cycle 22 will provide a concerted attack on the impulsive phase as part of the Max '91 program.     

Glacio-lacustrine stratigraphy,aquifer characterization and contaminant transport: a case study in South Lake Tahoe,California, USA

A hydrogeologic model that has been used by many researchers and consultants to describe an area of South Lake Tahoe, California, USA impacted by MTBE contamination describes a relatively homogeneous unconfined aquifer comprised of poorly sorted glacial outwash deposits, within which water-supply wells are able to exert significant alteration in natural groundwater flow. A re-examination of the area’s hydrogeology is presented, which supports a layered heterogeneous aquifer system constructed of alternating fine and coarser-grained glacio-lacustrine depositional units. This re-evaluation was accomplished through a review of lithologic logs across an area of approximately 1 km², combined with observations of significant hydraulic head differences and knowledge of the depositional environments controlled by Pleistocene Lake Tahoe high stands. Many of the fine-grained units observed at depths from 6 to 15 m, although relatively thin, are generally continuous and serve as significant barriers to groundwater flow. The vertical migration of contamination across these fine-grained units to deeper groundwaters was facilitated by cross-screened monitoring wells installed as part of site investigation activities. This conclusion highlights the importance of geologic characterization and proper monitoring well construction at contaminated site investigations.

---

Electronic supplementary material   The online version of this article (doi:) contains supplementary material, which is available to authorized users.

The elastic properties of single-crystal fayalite as determined by dynamical measurement techniques

We present new elasticity measurements on single-crystal fayalite and combine our results with other data from resonance, pulse superposition interferometry, and Brillouin scattering to provide a set of recommended values for the adiabatic elastic moduliC _ij and their temperature variations. We use a resonance method (RPR) with specimens that were previously investigated by pulse superposition experiments. The nineC _ij of fayalite are determined from three new sets of measurements. One set of our newC _ij data is over the range 300–500 K. We believe that the relatively large discrep ncies found in someC _ij are due in large part to specimen inhomogeneities (chemical and microstructural) coupled with differences in the way various techniques sample, rather than only systematic errors associated with experimental procedures or in the preparations of the specimens.Our recommendeaC _ij's (GPa) and (C _ij/T) _p (GPa/K) are: The resulting values for the isotropic bulk and shear moduli,K _s and , and their temperature derivatives are:K _s=134(4) GPa; =50.7(0.3) GPa; (K _s/T) _p =–0.024(0.005) GPa/K; and (/T) _p =–0.013(0.001) GPa/K. An important conclusion is thatK _s increases as the Fe/(Fe+Mg) ratio in olivine is increased.     

Decimetric type III radio bursts and associated hard X-ray spikes

A detailed comparison is made between hard X-ray spikes and decimetric type III radio bursts for a relatively weak solar flare on 1981 August 6 at 10: 32 UT. The hard X-ray observations were made at energies above 30 keV with the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission and with a balloon-born coarse-imaging spectrometer from Frascati, Italy. The radio data were obtained in the frequency range from 100 to 1000 MHz with the analog and digital instruments from Zürich, Switzerland. All the data sets have a time resolution of 0.1 s or better. The dynamic radio spectrum shows many fast drift type III radio bursts with both normal and reverse slope, while the X-ray time profile contains many well resolved short spikes with durations of 1 s. Some of the X-ray spikes appear to be associated in time with reverse-slop bursts suggesting either that the electron beams producing the radio bursts contain two or three orders of magnitude more fast electrons than has previously been assumed or that the electron beams can trigger or occur in coincidence with the acceleration of additional electrons. One case is presented in which a normal slope radio burst at 600 MHz occurs in coincidence with the peak of an X-ray spike to within 0.1 s. If the coincidence is not merely accidental and if it is meaningful to compare peak times, then the short delay would indicate that the radio signal was at the harmonic and that the electrons producing the radio burst were accelerated at an altitude of 4 × 10⁹ cm. Such a short delay is inconsistent with models invoking cross-field drifts to produce the electron beams that generate type III bursts but it supports the model incorporating a MASER proposed by Sprangle and Vlahos (1983).     

Water ice polymorphs and their significance on planetary surfaces

Impacts into an icy surface could produce significant amounts of high pressure forms of water ice. Due to the relatively low ambient surface temperatures on satellites in the outer solar system and the modest temperature rises accompanying the impact pressures required for water ice metamorphism, high-pressure polymorphs will be created by and may remain after large cratering events. If so, those high-pressure ices should be ubiquitous. Low-pressure cubic ice may be abundant as well. Impacts into an icy regolith may both produce high-pressure polymorphs from ice I and destroy high-pressure polymorphs already present. The result will be an (unknown) equilibrium concentration of high pressure polymorphs in the regolith. Polymorphs may be detectable and mappable by reflection spectroscopy at vacuum ultraviolet and mid-infrared wavelengths.     

Far-infrared spectral observations of Saturn and its rings

The spectrum of Saturn and its rings between 45 and 115 μm has been measured at an average resolving power of 14 from the NASA Lear Jet. The combined brightness temperature of the rings and planetary disk decreases beyond 65 μm, in disagreement with previous results. A brightness temperature of 65 ± 10°K is obtained for the planetary disk in the 80–110-μm wavelength range if a large-particle, constant-emissivity model is assumed for the rings. The possible effects of small particles in the rings are briefly considered.