Observation of chromospheric evaporation during the solar maximum mission

A sample of flares detected in 1980 with the Bent Crystal Spectrometer and the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission satellite has been analysed to study the upward motions of part of the soft X-ray emitting plasma. These motions are inferred from the presence of secondary blue-shifted lines in the Ca XIX and Fe XXV spectral regions during the impulsive phase of disk flares. Limb flares do not show such blue-shifted lines indicating that the direction of the plasma motion is mainly radial and outward. The temporal association of these upward motions with the rise of the thermal phase and with the impulsive hard X-ray burst, as well as considerations of the plasma energetics, favour the interpretation of this phenomenon in terms of chromospheric evaporation. The two measureable parameters of the evaporating plasma, emission measure and velocity, depend on parameters related to the energy deposition and to the thermal phase. The evaporation velocity is found to be correlated with the spectral index of the hard X-ray flux and with the rise time of the thermal emission measure of the coronal plasma. The emission measure of the rising plasma is found to be correlated with the total energy deposited by the fast electrons in the chromosphere by collisions during the impulsive phase and with the maximum emission measure of the coronal plasma.     

Microwave and hard X-Ray observations of a solar flare with a time resolution better than 100 ms

Simultaneous microwave and X-ray observations are presented for a solar flare detected on May 8, 1980 starting at 19:37 UT. The X-ray observations were made with the Hard X-Ray Burst Spectrometer on the Solar Maximum Mission and covered the energy range from 28–490 keV with a time resolution of 10 ms. The microwave observations were made with the 5 and 45 foot antennas at the Itapetinga Radio Observatory at frequencies of 7 and 22 GHz, with time resolutions of 100 ms and 1 ms, respectively. Detailed correlation analysis of the different time profiles of the event show that the major impulsive peaks in the X-ray flux preceded the corresponding microwave peaks at 22 GHz by about 240 ms. For this particular burst the 22 GHz peaks preceded the 7 GHz by about 1.5 s. Observed delays of the microwave peaks are too large for a simple electron beam model but they can be reconciled with the speeds of shock waves in a thermal model.     

Advances in our understanding of the gem corundum deposits of the West Pacific continental margins intraplate basaltic fields

Recent discoveries over the last decade of new gemfields, exploitation of new and existing deposits, and application of relatively new techniques have greatly increased our knowledge of the basalt-derived gem sapphire–ruby–zircon deposits. In this paper we focus on the Late Mesozoic to Cenozoic intraplate basaltic fields of the West Pacific continental margins. We review advances made in understanding the genesis of these deposits, based on the application of newer techniques. We also critically review existing data on the gem corundum deposits, in order to further refine a model for their origin.In some of the intraplate basaltic fields, corundum-bearing xenoliths have been found showing a range of PT formation conditions from 790 °C at 0.85 GPa to as much as 1100 to 1200 °C at 1.0 to 2.5 GPa. Although most magmatic sapphires contain syngenetic inclusions of columbite-group phases, zircon, spinel and rutile, some contain additional nepheline and K-feldspar, suggesting crystallization from more undersaturated alkaline magma while the Weldborough field of NE Tasmania also contains molybdenite and beryl, suggesting at least some interaction with more fractionated ‘granitic-type’ magmas. There is a large range in PT conditions calculated for the metamorphic rubies (from 780 to 940 °C, through 800 to 1150 °C up to 1000 to 1300 °C). Fluid/melt inclusion studies on magmatic corundums generally suggest that they formed in a CO₂-rich environment from a ‘syenitic’ melt under a range of T conditions from 720 to 880 °C up to 1000 to 1200 °C. Oxygen isotope studies reveal that typical magmatic corundums have values of + 4.4 to 6.9‰, whereas metamorphic corundums from the same basaltic host have lower values of + 1.3 to 4.2‰.Geochronological studies have shown that some fields produced a simple eruptive and zircon/corundum crystallization event while others had multiple eruptive events but only one or two zircon crystallization events. For a few fields, some corundums/zircons crystallized in storage regions and then remained relatively inert for periods of 200 to 400 Ma without significant change before transport to the surface in the Cenozoic. Tectonic studies of the Australian region suggest that many of the corundums crystallized from magmas related to episodic basaltic volcanism in a tectonic regime of extension, associated with the opening of the Tasman and Coral Seas. For the Asian region, the magmatic–polygenetic corundums within the basaltic fields largely crystallized in a tectonic regime of distributed E–W extension, whereas the metamorphic-metasomatic corundums crystallised in a transpressional regime associated with the collision of the Indian Plate with the Eurasian Plate (e.g., [Garnier, V., Giuliani, G., Maluski, H., Ohnenstetter, D., Deloule, E., 2003. Ar–Ar and U–Pb ages of marble-hosted ruby deposits from Central and South-east Asia. Geophysical Research Abstracts 5, 03751; Garnier, V., Giuliani, G., Ohnenstetter, D., and Schwarz, D., 2004. Les gisements de corindon: classification et genese. Les placers a corindon gemme. Le Regne Mineral 55, 7-47; Garnier, V., Ohnenstetter, D., Giuliani, G., Maluski, H., Deloule, E., Phan Trong, T., Pham Van, L., Hoang Quang, V., 2005a. Age and significance of ruby-bearing marble from the Red River Shear Zone, Northern Vietnam. Canadian Mineralogist 43, 1315–1329]).     

Quantitative textural analysis of packings of elongate crystals

The spatial distribution of grains in a solidifying igneous rock controls the physical properties of the crystal mush, and in turn is controlled by the rate of crystal growth and accumulation. A predominant non-spherical habit for igneous minerals brings into question the use of spherical particles in reference packings used for quantification of spatial distribution. Furthermore, variations of crystal clustering/ordering with length scale require spatial statistics which take into account the distribution of particles beyond nearest neighbours. Using random close packings of spherocylinders, we demonstrate the importance of aspect ratio for the aggregation index (usually known as R) and show that packings of spherical particles have more structure than packings of rods. The spatial distribution functions demonstrate that the plagioclase grains in the colonnade from the Holyoke basalt are clustered on a length scale of 0.5 mm. Understanding the controls on grain spatial distribution in igneous rocks will depend on the application of these techniques to well-understood environments.     

The hydrochemistry of a semi-arid pan basin case study: Sua Pan,Makgadikgadi, Botswana

This study presents results on the fluid and salt chemistry for the Makgadikgadi, a substantial continental basin in the semi-arid Kalahari. The aims of the study are to improve understanding of the hydrology of such a system and to identify the sources of the solutes and the controls on their cycling within pans. Sampling took place against the backdrop of unusually severe flooding as well as significant anthropogenic extraction of subsurface brines. This paper examines in particular the relationship between the chemistry of soil leachates, fresh stream water, salty lake water, surface salts and subsurface brines at Sua Pan, Botswana with the aim of improving the understanding of the system’s hydrology. Occasionally during the short wet season (December–March) surface water enters the saline environment and precipitates mostly calcite and halite, as well as dolomite and traces of other salts associated with the desiccation of the lake. The hypersaline subsurface brine (up to TDS 190,000 mg/L) is homogenous with minor variations due to pumping by BotAsh mine (Botswana Ash (Pty) Ltd.), which extracts 2400 m³ of brine/h from a depth of 38 m. Notable is the decrease in TDS as the pumping rate increases which may be indicative of subsurface recharge by less saline water. Isotope chemistry for Sr (⁸⁷Sr/⁸⁶Sr average 0.722087) and S (δ³⁴S average 34.35) suggests subsurface brines have been subject to a lithological contribution of undetermined origin. Recharge of the subsurface brine from surface water including the Nata River appears to be negligible.     

Biogeochemical impacts due to mesoscale eddy activity in the Sargasso Sea as measured at the Bermuda Atlantic Time-series Study (BATS)

A comparison of monthly biogeochemical measurements made from 1993 to 1995, combined with hydrography and satellite altimetry, was used to assess the impacts of nine eddy events on primary productivity and particle flux in the Sargasso Sea. Measurements of primary production, thorium-234 flux, nitrate+nitrite, and photosynthetic pigments made at the US JGOFS Bermuda Atlantic Time-series Study (BATS) site were used. During the 3 years of this study, four out of six high thorium-234 flux events occurred during the passage of an eddy. Primary production nearly as high as the spring bloom maximum was observed in two mode-water eddies (May 1993 and July 1995). The 1994 spring bloom at BATS was suppressed by the passage of an anticyclone. Distinct phytoplankton community shifts were observed in mode-water eddies, which had an increased percentage of diatoms and dinoflagellates, and in cyclones, which had an increased percentage of Synechococcus. These variations in species composition within mode-water eddies and cyclones may be associated with the ages of the sampled eddies, and/or differences in physical, chemical, and biological factors in these two distinct eddy types. In general, eddies that were 1–2 months old elicited a large biological response; eddies that were 3 months old may show a biological response and were accompanied by high thorium flux; eddies that were 4 months old or older did not show a biological response or high thorium flux. A conceptual model depicting temporal changes during eddy upwelling, maturation, and decay can explain the observations in all seven upwelling eddies present in the time-series investigated herein.     

An iterative method for boundary element solution of large offshore structures using the GMRES solver

The GMRES approach is used to solve complex matrix solution arising from boundary element analysis of large offshore structures. This makes it possible to solve problems with large numbers of panels on a workstation with a much smaller memory than typical high performance computers. The speed of the solver is compatible with direct solvers when the enough RAM is available. Otherwise, an iteration procedure can be used. By using an out-of-core treatment, typical RAM requirement is reduced to a size approximately linearly proportional to the panel number n instead of being proportional to n². The code is first verified with direct solver for cases with small number of panels. The applicability to large offshore structure of the model is demonstrated for a TLP case.     

Determination of phospholipid fatty acid structures and stable carbon isotope compositions of deep-sea sediments of the Northwest Pacific, ODP site 1179

Sediment samples ranging from 0.05 to 278 m below sea floor (mbsf) at a Northwest Pacific deep-water (5564 mbsl) site (ODP Leg 191, Site 1179) were analyzed for phospholipid fatty acids (PLFAs). Total PLFA concentrations decreased by a factor of three over the first meter of sediment and then decreased at a slower rate to approximately 30 mbsf. The sharp decrease over the first meter corresponds to the depth of nitrate and Mn(IV) reduction as indicated by pore water chemistry. PLFA-based cell numbers at site 1179 had a similar depth profile as that for Acridine orange direct cell counts previously made on ODP site 1149 sediments which have a similar water depth and lithology. The mole percentage of straight chain saturated PLFAs increases with depth, with a large shift between the 0.95 and 3.95 mbsf samples. PLFA stable carbon isotope ratios were determined for sediments from 0.05 to 4.53 mbsf and showed a general trend toward more depleted δ¹³C values with depth. Both of these observations may indicate a shift in the bacterial community with depth across the different redox zones inferred from pore water chemistry data. The PLFA 10me16:0, which has been attributed to the bacterial genera Desulfobacter in many marine sediments, showed the greatest isotopic depletion, decreasing from − 20 to − 35‰ over the first meter of sediment. Pore water chemistry suggested that sulfate reduction was absent or minimal over this same sediment interval. However, 10me16:0 has been shown to be produced by recently discovered anaerobic ammonium oxidizing (anammox) bacteria which are known chemoautotrophs. The increasing depletion in δ¹³C of 10me16:0 with the unusually lower concentration of ammonium and linear decrease of nitrate concentration is consistent with a scenario of anammox bacteria mediating the oxidation of ammonium via nitrite, an intermediate of nitrate reduction.     

The wadic project: A comprehensive field evaluation of directional wave instrumentation

The results of a comprehensive field trial of nearly all commercially available directional wave measurement systems at the Edda field in the North Sea during winter 1985-86 are presented. The results summarize the accuracy of the principal engineering wave parameters from each system and the dependence on sea state. Limiting factors on system performance and operational problems are also included in the assessment. Overall experience has been good with systems utilizing widely different measurement principles returning consistent results.     

The parameterisation and prediction of wave height and wind speed persistence statistics for oil industry operational planning purposes

This study sets out to define the basic forms in which wind speed and wave height persistence statistics may be defined for offshore engineering applications, and describes the development of a mathematical persistence model.The model incorporates some of the principles laid down by other workers, but it is fundamentally based on a new concept for parameterising persistence statistics, linking wind speed and sea state percentage probability of exceedance with the persistence average duration.North Sea measured wind and wave data have been used to calibrate and test the model. During the course of these test runs it proved necessary to fine tune the basic Weibull equation of the model, but following these adjustments the model runs were found to correlate well with the measured data.It is concluded that the model may be used to predict wind speed and wave height persistence statistics with acceptable accuracy for preliminary stage oil industry planning purposes and that the calibrated model has particular application for those areas where little measured data are currently available.