ENVIRONMENTAL DEGRADATION IN BRAZILIAN AMAZONIA: PERSPECTIVES IN US NEWS MEDIA*

While news media play a major role in shaping public opinion and government policy, existing literature suggests that coverage of both the third world and environmental issues is superficial and crisis-oriented. This study uses the example of Amazonian deforestation to explore the quantity and content of coverage in influential American newspapers. We found that coverage included a wide range of (sometimes) contradictory theories regarding the causes of deforestation, and that the amount, but not the nature, of the coverage changed in response to a “crisis.”     

Comparison of Enterococcus density estimates in marine beach and bay samples by real-time polymerase chain reaction, membrane filtration and defined substrate testing

Currently, densities of Enterococcus in marine bathing beach samples are performed using conventional methods which require 24 h to obtain results. Real-time PCR methods are available which can measure results in as little as 3 h. The purpose of this study was to evaluate a more rapid test method for the determination of bacterial contamination in marine bathing beaches to better protect human health. The geometric mean of Enterococcus densities using Enterolert® defined substrate testing and membrane filtration ranged from 5.2 to 150 MPN or CFU/100 mL and corresponding qPCR results ranged from 6.6 to 1785 CCE/100 mL. The regression analysis of these results showed a positive correlation between qPCR and conventional tests with an overall correlation (r) of 0.71. qPCR was found to provide accurate and sensitive estimate of Enterococcus densities and has the potential to be used as a rapid test method for the quantification of Enterococcus in marine waters.     

Organic carbon amendments for passive in situ treatment of mine drainage: Field experiments

A field-scale experiment was conducted to evaluate various organic C sources as amendments for passive treatment of tailings pore water. Varied mixtures of peat, spent-brewing grain (SBG) and municipal biosolids (MB) were assessed for the potential to promote dissimilatory sulfate reduction (DSR) and metal-sulfide precipitation. Five amended cells and one control were constructed in the vadose zone of a sulfide- and carbonate-rich tailings deposit, and the geochemistry, microbiology and mineralogy were monitored for 4 a. Increases in pore-water concentrations of dissolved organic C (DOC) and decreases in aqueous SO₄ concentrations of >2500 mg L⁻¹ were observed in cells amended with peat + SBG and peat + SBG + MB. Removal of SO₄ was accompanied by shifts in δ³⁴S-SO₄ values of >+30‰, undersaturation of pore water with respect to gypsum [CaSO₄·2H₂O], and increased populations of SO₄-reducing bacteria (SRB). Decreases in aqueous concentrations of Zn, Mn, Ni, Sb and Tl were observed for these cells relative to the control. Organic C introduction also supported growth of Fe-reducing bacteria (IRB) and increases in Fe and As concentrations. Enhanced Fe and As mobility occurred in all cells; however, maximum concentrations were observed in cells amended with MB. Subsequent decreases in Fe and As concentrations were attributed to DSR and metal-sulfide precipitation. The common presence of secondary Zn-S and Fe-S phases was observed by field emission-scanning electron microscopy (FE-SEM) and energy dispersive X-ray (EDS) spectroscopy. Selective extractions indicated that large decreases in water-soluble SO₄ occurred in cells that supported DSR. Furthermore, amendments that supported DSR generally were characterized by slight decreases in solid-phase concentrations of extractable metal(loid)s. Amendment of tailings with organic C amendments that supported ongoing DOC production and DSR was essential for sustained treatment.     

GSFC optical ozonesonde results during the Gap,France, intercomparisons,June 1981

A GSFC Super Loki optical ozonesonde instrument was flown as part of the ozone sensor intercomparison balloon campaign at Gap, France, in June 1981. A primary objective was to confirm biases between external absorption techniques, such as the GSFC sonde, and in situ techniques, which include ECC, Mast-Brewer, and DASIBI sondes. Ozone distributions were obtained with the GSFC sonde on three of the four ascent-descent legs of the first flight on 19 June. Ozone densities were measured redundantly over altitudes from 22 to 32 km using filters centered at 303 and 300 nm. The three profiles obtained by averaging the data from the two channels are in close agreement with an average S.E. of 1.4%. However, small but consistent differences were found between the ozone densities measured at the two wavelengths. The average difference is 5% using Vigroux cross sections and 4% using preliminary Bass cross sections. The integral ozone amount above the first ceiling altitude of 32.85 km was determined by the Langley plot method to be 45 D.U. The total ozone derived by integrating the optical ozonesonde and ECC profiles is within 2% of the Chiran Dobson Spectrophotometer observation based on a pre-campaign calibration but is 9% greater than the amount derived using a post-campaign calibration.     

On zero-thickness interface elements for diffusion problems

The present study focuses on the hydraulic behaviour of joints, and, specially, on its numerical implementation in terms of the FEM analysis using a discrete fracture flow approach. Fluid flow through discontinuities has traditionally been modelled using special elements of zero-thickness, which we can classify into single, double and triple-nodded. Single node elements are the simplest and consist of ‘line’ or ‘pipe’ elements which are superimposed onto the standard continuum mesh and that can only model the longitudinal conductivity through the discontinuity. On the other hand, some authors have included the influence of a transversal conductivity, and the subsequent localized potential drop, by using triple node interface elements. In those, the two nodes of the adjacent continuum elements represent the potentials in the pore system on each side of the interface, and a third node in the middle represents the average potential of the fluid in the channel represented by the discontinuity. Finally, double node interface elements have also been proposed, which have the advantage of making it possible to use the same FE mesh for both mechanical and flow analysis. In some cases the influence of a transversal conductivity is not considered and, therefore, although geometrically double-nodded, these elements belong to the single node type and when time comes to solve the system the two nodes must have the same potential, which can only be obtained by the ‘trick’ of prescribing the equivalence of these two d.o.f. before solving the global system of equations. This limitation may, however, be avoided by assuming that the potential in the channel is the average of the two sides of the interface. Based in this simple assumption, an alternative flow interface model has been recently developed and implemented, which preserves both longitudinal and transversal conductivities. An application example is developed and solved with the three types of interfaces described. The results offer useful information regarding the range of applicability and limitations of the new double-nodded interface element proposed. Copyright © 2004 John Wiley & Sons, Ltd.     

Visibility in airborne volcanic ash: considerations for surface transportation using a laboratory-based method

All modes of surface transportation can be disrupted by visibility degradation caused by airborne volcanic ash. Despite much qualitative evidence of low visibility on roads following historical eruptions worldwide, there have been few detailed studies that have attempted to quantify relationships between visibility conditions and observed impacts on network functionality and safety. In the absence of detailed field observations, such gaps in knowledge can be filled by developing empirical datasets through laboratory investigations. Here, we use historical eruption data to estimate a plausible range of ash-settling rates and ash particle characteristics for Auckland city, New Zealand. We propose and implement a new experimental set-up in controlled laboratory conditions, which incorporates a dual-pass transmissometer and solid aerosol generator, to reproduce these ash-settling rates and calculate visual ranges through the associated airborne volcanic ash. Our findings demonstrate that visibility is most impaired for high ash-settling rates (i.e. > 500 g m^?2 h^?1) and particle size is deemed the most influential ash characteristic for visual range. For the samples tested (all < 320 μm particle diameter), visibility was restricted to ~ 1–2 m when ash settling was replicated for very high rates (i.e. ~ 4000 g m^?2 h^?1) and was especially low when ash particles were fine-grained, more irregular in shape and lighter in colour. Finally, we consider potential implications for disruption to surface transportation in Auckland through comparisons with existing research which investigates the consequences of visual range reduction for other atmospheric hazards such as fog. This includes discussing how our approach might be utilised in emergency and transport management planning. Finally, we summarise strategies available for the mitigation of visibility degradation in environments contaminated with volcanic ash.