The X-ray and extreme-ultraviolet flux evolution of SS Cygni throughout outburst

We present the most complete multiwavelength coverage of any dwarf nova outburst: simultaneous optical, Extreme Ultraviolet Explorer and Rossi X-ray Timing Explorer observations of SS Cygni throughout a narrow asymmetric outburst. Our data show that the high-energy outburst begins in the X-ray waveband 0.9–1.4 d after the beginning of the optical rise and 0.6 d before the extreme-ultraviolet rise. The X-ray flux drops suddenly, immediately before the extreme-ultraviolet flux rise, supporting the view that both components arise in the boundary layer between the accretion disc and white dwarf surface. The early rise of the X-ray flux shows that the propagation time of the outburst heating wave may have been previously overestimated.
The transitions between X-ray and extreme-ultraviolet dominated emission are accompanied by intense variability in the X-ray flux, with time-scales of minutes. As detailed by Mauche & Robinson, dwarf nova oscillations are detected throughout the extreme-ultraviolet outburst, but we find they are absent from the X-ray light curve.
X-ray and extreme-ultraviolet luminosities imply accretion rates of  3 × 10¹⁵ g s⁻¹  in quiescence,  1 × 10¹⁶ g s⁻¹  when the boundary layer becomes optically thick, and  ∼10¹⁸ g s⁻¹  at the peak of the outburst. The quiescent accretion rate is two and a half orders of magnitude higher than predicted by the standard disc instability model, and we suggest this may be because the inner accretion disc in SS Cyg is in a permanent outburst state.     

A Quantitative Method to Optimise Magnetic Field Line Fitting of Observed Coronal Loops

Many authors use magnetic-field models to extrapolate the field in the solar corona from magnetic data in the photosphere. The accuracy of such extrapolations is usually judged qualitatively by eye, where a less judgemental quantitative approach would be more desirable. In this paper, a robust method for obtaining the best fit between a theoretical magnetic field and intensity observations of coronal loops on the solar disk will be presented. The method will be applied to Yohkoh data using a linear force-free field as an illustration. Any other theoretical model for the magnetic field can be used, provided there is enough freedom in the model to optimize the fit.     

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Structurally controlled gold and sulfosalt mineralization: the Altenberg example, Salzburg Province, Austria

Summary ?In the south-eastern Altenbergkar–Silbereck area in the eastern Tauern window (Lungau, Salzburg) structurally controlled precious-metal (Au–Ag) mineralization is hosted in marbles of the Permo(?)-Mesozoic Silbereck Formation and in the underlying Variscan Central gneiss. During the Alpine otogeny both lithologies were affected by ductile deformation (shearing, D1; folding, D2/D3) and subsequent brittle deformation (tension gashes, D4; normal faulting, D5) related to the uplift and exhumation of the Tauern window. Mineralization is controlled by brittle D4 structures. NE–SW trending steeply dipping tension gashes of the “Tauerngoldgang” type occur within the Central gneiss. Three different marble-hosted ore types following fracture systems as well as foliation and bedding planes can be distinguished: 1) metasomatic replacement ores, 2) ores in tension gashes and 3) ores in talc-bearing structures, often containing high-grade gold and silver mineralization (native gold in association with Ag–Pb–Bi–sulfosalts). Four stages of mineralization can be distinguished which occur in all ore types: arsenopyrite–pyrite–pyrrhotite (first stage), Au–(Ag–Pb–Bi–sulfosalts) (second stage), base-metal sulfides and tetrahedrite–tennantite (third stage) and Ag-rich galena (fourth stage). Preliminary fluid inclusion data indicate temperatures of ore formation well above 300 °C (346 °C mean) for the second stage within the Central gneiss and temperatures between 310 and 230 °C for the second and third stages in the marble. Received October 12, 2001; revised version accepted September 5, 2002 Published online March 10, 2003     

Correcting systematic effects in a large set of photometric light curves

We suggest a new algorithm to remove systematic effects in a large set of light curves obtained by a photometric survey. The algorithm can remove systematic effects, such as those associated with atmospheric extinction, detector efficiency, or point spread function changes over the detector. The algorithm works without any prior knowledge of the effects, as long as they linearly appear in many stars of the sample. The approach, which was originally developed to remove atmospheric extinction effects, is based on a lower rank approximation of matrices, an approach which has already been suggested and used in chemometrics, for example. The proposed algorithm is especially useful in cases where the uncertainties of the measurements are unequal. For equal uncertainties, the algorithm reduces to the Principal Component Analysis (PCA) algorithm. We present a simulation to demonstrate the effectiveness of the proposed algorithm and we point out its potential, in the search for transit candidates in particular.     

Richtmyer-Meshkov Experiments on the Omega Laser

Observations of the interstellar medium reveal a dynamic realm permeated by shocks. These shocks are generated on a large range of scales by galactic rotation, supernovae, stellar winds, and other processes. Whenever a shock encounters a density interface, Richtmyer-Meshkov instabilities may develop. Perturbations along the interface grow, leading to structure formation and material mixing. An understanding of the evolution of Richtmyer-Meshkov instabilities is essential for understanding galactic structure, molecular cloud morphology, and the early stages of star formation. An ongoing experimental campaign studies Richtmyer-Meshkov mixing in a convergent, compressible, miscible plasma at the Omega laser facility. Cylindrical targets, consisting of a low density foam core and an aluminum shell covered by an epoxy ablator, are directly driven by fifty laser beams. The aluminum shell is machined to produce different perturbation spectra. Surface types include unperturbed (smooth), single-mode sinusoids, multi-mode (rough), and multi-mode with particular modes accentuated (specified-rough). Experimental results are compared to theory and numerical simulations.     

Modulation of galactic cosmic ray anisotropy in heliomagnetosphere: Influence of cosmic ray scattering on sidereal daily variation

In previous papers, the present authors have shown that the galactic anisotropy is modulated due to cosmic ray orbital deflection in the heliomagnetosphere, and that the sidereal time daily variations of galactic origin can be expressed using the basic vectors, which have been obtained by calculating trajectories of cosmic rays in a model magnetosphere having Parker's Archimedian spiral structure with a flat or a wavy neutral sheet. In the present paper, the magnetic irregularities superposed on the Parker's spiral field have been taken into account, which cause the scattering of cosmic rays and disturb their orbits. We examined the fluctuations of asymptotic directions calculating their orbits by the Monte-Carlo simulation, based on the theory of the multiple scattering process. It is shown that the dispersion of the projected deviation angle is determined mainly by the scattering mean free path and by the structure of the order magnetic field, e.g. the polarity state of the heliomagnetosphere and the extent of the neutral sheet. We investigated also the influence of the fluctuations of asymptotic directions on the sidereal daily variation. It is found that, under some conditions, the scattering causes only the attenuation of the amplitude of the basic vector, and does not change its phase. The attenuation is negligibly small at high rigidities larger than ~ 1000 GV, but becomes more serious with decreasing rigidity. The rigidity dependence curve of the attenuation rate was calculated for various cases. A simple and approximate method is also presented for the derivation of those curves for any value of the magnitude of the mean free path and for various model magnetospheres. It is noted, however, that the lower limiting rigidity below which the present method is not applicable is relatively high in the Positive polarity state.     

Rayleigh-Taylor instability of two viscous superposed rotating and conducting fluids

Classical R-M and synthetic W-D analysis of V758 Centauri are presented. Two solutions (semi-detached and contact) were found from differential corrections approach. The semi-detached model is physically acceptable since the system is thermally decoupled. The solution for this case and the photometric data are consistent with a B9 primary and A9 secondary components having parameters close to Main-Sequence values. It is suggested that V758 Centauri is a B-type W UMa system at the brokencontact phase predicted by the Thermal Relaxation Oscillations theory.