Nest microhabitat selection in larks from a European semi-arid shrub-steppe: the role of sunlight and predation

We analysed nest site selection in two shrub-steppe larks, the lesser short-toed larkCalandrella rufescensand the Thekla larkGalerida theklae. Both species nest on the ground next to a bush preferably facing north or north-east. Nestling growth and fledging weight are greater when the nest faces these directions. Both species prefer to nest next to camephytes with little foliage, and the lesser short-toed lark chooses sites with high visibility. We conclude that sunlight and nest predation are fundamental selective pressures determining nest microhabitat selection in larks in semi-arid areas.     

Effects of early season defoliation ofAnthyllis cytisoides(a Mediterranean browse species) on further herbivore attack

To determine if defoliation of a woody plant affects foraging by folivorous insects, we examined the infection rate (number of leaves damaged per total number of leaves sampled on marked stems) ofAnthyllis cytisoidesunder three experimental treatments: 10, 50 and 90% plant defoliation. Observations were made for three age classes, established by trunk base perimeter (equal to or lower than 11 cm, between 11 and 20 cm, larger than 20 cm). Plants respond positively to artificial defoliation by increasing total vegetative length of the stem and total inflorescence length. This response is most evident in young individuals.Response to herbivory was measured as overall infection rate and also as infection rate by different feeding guilds—chewing, mining, or sucking insects. We found that increased defoliation elicited increased resistance of leaves to insect attack. This was particularly evident in young plants. Different insect guilds respond in different ways. Attack by chewing insects declines with defoliation for all plant age classes; only sucking insects which feed on the oldest plants reduce feeding rate with plant defoliation. Finally, mining insects present the opposite trend in young and senescent plants.     

The age and thermal history of Cerro Rico de Potosi, Bolivia

 Cerro Rico de Potosi, Bolivia, is the world’s largest silver deposit and has been mined since the sixteenth century for silver, and for tin and zinc during the twentieth century, together with by-product copper and lead. The deposit consists primarily of veins that cut an altered igneous body that we interpret to be a dacitic volcanic dome and its underlying tuff ring and explosion breccia. The deposit is compositionally and thermally zoned, having a core of cassiterite, wolframite, bismuthinite, and arsenopyrite surrounded by a peripheral, lower-temperature mineral assemblage consisting principally of sphalerite, galena, lead sulfosalt, and silver minerals. The low-temperature assemblage also was superimposed on the high-temperature assemblage in response to cooling of the main hydrothermal system. Both the dacite dome and the ore fluids were derived from a larger magmatic/hydrothermal source at depth. The dome was repeatedly fractured by recurrent movement on the fault system that guided its initial emplacement. The dome was extruded at 13.8±0.2 Ma (2σ), based on U-Th-Pb dating of zircon. Mineralization and alteration occurred within about 0.3 my of dome emplacement, as indicated by a ⁴⁰Ar/³⁹Ar date of 13.76±0.10 Ma (1σ) for sericite from the pervasive quartz-sericite-pyrite alteration associated with the main-stage, high-temperature, mineralization. The last thermal event able to reset zircon fission tracks occurred no later than 12.5±1.1 Ma (1σ), as indicated by fission-tract dating. Minor sericite, and magmatic-steam alunite veins, were episodically formed around 11 Ma and between 8.3 and 5.7 Ma; the younger episodes occurring at the time of extensional fracturing at Cerro Rico and widespread volcanism in the adjacent Los Frailes volcanic field. None of these younger events appear to be significant thermal/mineralizing events; the exceptionally flat thermal release pattern of ³⁹Ar from sericite and the results of the fission-tract dating of zircon show that none of the younger events was hot enough, and lasted long enough, to cause significant loss of Ar or annealing of zircon fission tracks. U-Th-Pb dating of zircon cores indicates a Precambrian progenitor for some zircons, and REE analyses of dated samples of hydrothermally altered dacite show the presence of a prominent positive Eu anomaly, which constrains interpretations of the origin and evolution of the magmatic/hydrothermal system. Received: 14 October 1995/Accepted: 29 January 1996     

Découverte d'un diatrème de kimberlite diamantifère à Séguéla en Côte-d'Ivoire

The Séguéla area in Ivory Coast is known for its diamond-bearing field related to dykes of kimberlite and lamproite. These dykes, devoid of any deformation and metamorphism, crosscut the Birimian formations. Their N 170° orientation is controlled by the tectonized contact between the Archean and the Paleoproterozoic shields of the West-African craton. Discovery of a diatreme, with its pipe breccias and well-preserved maar sediments, below the present-day colluvia, attests for the probable recent geological age (Cretaceous?) of the kimberlitic activity. To cite this article: A. Pouclet et al., C. R. Geoscience 336 (2004).     

Seismic studies of the Brasília fold belt at the western border of the São Francisco Craton, Central Brazil, using receiver function, surface-wave dispersion and teleseismic tomography

The Tocantins Province in Central Brazil is composed of a series of SSW–NNE trending terranes of mainly Proterozoic ages, which stabilized in the Neoproterozoic in the final collision between the Amazon and São Francisco cratons. No previous information on crustal seismic properties was available for this region. Several broadband stations were used to study the regional patterns of crustal and upper mantle structure, extending the results of a recent E–W seismic refraction profile. Receiver functions and surface wave dispersion showed a thin crust (33–37 km) in the Neoproterozoic Magmatic Arc terrane. High average crustal Vp/Vs ratios (1.74–1.76) were consistently observed in this unit. The foreland domain of the Brasília foldbelt, on the other hand, is characterized by thicker crust (42–43 km). Low Vp/Vs ratios (1.70–1.72) were observed in the low-grade foreland fold and thrust zone of the Brasília belt adjacent to the São Francisco craton. Teleseismic P-wave tomography shows that the lithospheric upper mantle has lower velocities beneath the Magmatic Arc and Goiás Massif compared with the foreland zone of the belt and São Francisco craton. The variations in crustal thickness and upper mantle velocities observed with the broadband stations correlate well with the measurements along the seismic refraction profile. The integration of all seismic observations and gravity data indicates a strong lithospheric contrast between the Goiás Massif and the foreland domain of the Brasília belt, whereas little variation was found across the foldbelt/craton surface boundary. These results support the hypothesis that the Brasília foreland domain and the São Francisco craton were part of a larger São Francisco-Congo continental plate in the final collision with the Amazon plate.     

Low-frequency 3-D seismic survey of upper crustal magmatic intrusions in the northeastern Pannonian basin of Hungary

A specially designed 700-km² grid survey, deploying 1000 regularly distributed low-frequency seismic recording systems, successfully investigated one of the most complex geologic environments of the Pannonian basin. The wide-angle signals penetrated through over 1000 m of multi-phase igneous lithology and recognized, for the first time, the underlying enigmatic Permian to Early Triassic basement rocks. Tomographic inversion of the first arrival grid data resulted in determination of an accurate three-dimensional (3-D) velocity field, to a depth of 4 km. The anomalous changes of the spatial velocity data outline the regional extent of the Late Miocene magmatic intrusions, which are covered by over 2000 m of Mid-Miocene to Pleistocene clastics. Complex relationship was found between the surface potential data and the intrusive bodies. This multi-faceted geophysical data analysis established a functional technique for mapping a subsurface with intricate acoustic and structural complexity.     

Seal capacity estimation from subsurface pore pressures

A cap rock's capacity to seal hydrocarbons depends on its wettability and the sizes of the pore throats within the interconnected pore system that the leaking hydrocarbons must penetrate. These critical pore throat sizes are often poorly constrained in hydrocarbon exploration, partly because measurements of pore throat sizes have not been performed, and partly because pore throat measurements on a few individual samples in the cap rock may not be representative for the seal capacity of the top seal as a whole. To the contrary, the presence of formation overpressure can normally be estimated in drilled exploration targets. The presence of overpressure in reservoirs testifies to small pore throats in the cap rocks, as large pore throats will result in sufficiently high cap rock permeability to bleed off the overpressure. We suggest a stepwise procedure that enables quantification of top seal capacities of overpressured traps, based on subsurface pressure information. This procedure starts with the estimation of cap rock permeabilities, which are consistent with observed overpressure gradients across the top seals. Knowledge of burial histories is essential for these estimations. Relationships between pore throat size and permeability from laboratory experiments are then applied to estimate critical pore throat diameters in cap rocks. These critical pore throat diameters, combined with information of the physical properties of the pore fluids, are then used to calculate membrane seal capacity of cap rocks. Estimates of top seal capacity based on this procedure are rather sensitive to the vertical fluid velocity, but they are also to some extent sensitive to inaccuracies of the pore throat/permeability relationship, overpressure gradient, interfacial tensions between pore fluids, hydrocarbon density and water viscosity values. Despite these uncertainties, applications of the above‐mentioned procedure demonstrated that the mere presence of reservoir overpressures testifies to sufficient membrane seal capacity of cap rocks for most geological histories. Exempt from this statement are basins with rapid and substantial sediment compaction in the recent past.     

Current states of stress in the northern Andes as indicated by focal mechanisms of earthquakes

Systematic inversion of double couple focal mechanisms of shallow earthquakes in the northern Andes reveals relatively homogeneous patterns of crustal stress in three main regions. The first region, presently under the influence of the Caribbean plate, includes the northern segment of the Eastern Cordillera of Colombia and the western flank of the Central Cordillera (north of 4°N). It is characterized by WNW–ESE compression of dominantly reverse type that deflects to NW–SE in the Merida Andes of Venezuela, where it becomes mainly strike–slip in type. A major bend of the Eastern thrust front of the Eastern Cordillera, near its junction with the Merida Andes, coincides with a local deflection of the stress regime (SW–NE compression), suggesting local accommodation of the thrust belt to a rigid indenter in this area. The second region includes the SW Pacific coast of Colombia and Ecuador, currently under the influence of the Nazca plate. In this area, approximately E–W compression is mainly reverse in type. It deflects to WSW–ENE in the northern Andes south of 4°N, where it is accommodated by right-lateral displacement of the Romeral fault complex and the Eastern front of the northern Andes. The third, and most complex, region is the area of the triple junction between the South American, Nazca and Caribbean plates. It reveals two major stress regimes, both mainly strike–slip in type. The first regime involves SW–NE compression related to the interaction between the Nazca and Caribbean plates and the Panama micro-plate, typically accommodated in an E–W left-lateral shear zone. The second regime involves NW–SE compression, mainly related to the interaction between the Caribbean plate and the North Andes block which induces left-lateral displacement on the Uramita and Romeral faults north of 4°N.Deep seismicity (about 150–170 km) concentrates in the Bucaramanga nest and Cauca Valley areas. The inversion reveals a rather homogeneous attitude of the minimum stress axis, which dips towards the E. This extension is consistent with the present plunge of the Nazca and Caribbean slabs, suggesting that a broken slab may be torn under gravitational stresses in the Bucaramanga nest. This model is compatible with current blocking of the subduction in the western northern Andes, inhibiting the eastward displacement of slabs, which are forced to break and sink in to the asthenosphere under their own weight.