Estimation of Water Particle Velocities by Empirical Transfer Function

-In previous and this studies it appears that the linear and nonlinear wave theory can notaccurately and easily predict the water particle velocities.Therefore,different from the theoretical consider-ations,in this study we have attempted to determine the transfer function empirically.Laboratory experi-ments were performed under various wave conditions.The empirical formulas of the transfer function ofthe wave height,angular frequency and water particle velocity were obtained on the basis of these test databy dimensional analysis and regression analysis.In intermediate and deep water depth conditions,thetransfer function was only a function of a nondimensional parameter which is composed of the angular fre-quency,the depth of the velocity gauge under the still water level,water depth and the acceleration of grav-ity.Finally,the empirical formulas were compared with experimental data and observational data formpresent and Cavaleri's(1978)studies.The empirical formulas were found to be in sufficient correl     

Mathematical Models for Combined Refraction-Diffraction of Waves on Non-Uniform Current and Depth

Two mathematical models for combined refraction-diffraction of regular and irregular waves on non-uniform current in water of slowly varying topography are presented in this paper. Model I is derived by wave theory and variational principle separately. It has two kinds of expressions including the dissipation term. Model n is based on the energy conservation equation with energy flux through the wave crest lines in orthogonal curvilinear coordinates and the wave kinematic conservation equation. The analysis and comparison and special cases of these two models are also given.     

Nonlinear Static Finite Element Stress Analysis of Pipe-in-Pipe Risers

Owing to the complexity of the pipe-in-pipe (PIP) riser system in structure, load and restraint, many problems arise in the structural analysis of the system. This paper presents a new method for nonlinear static finite element stress analysis of the PIP riser system. The finite element (FE) model of the PIP riser system is built via software AutoPIPE 6.1. According to the specialties of a variety of components in the PIP riser system, different elements are used so as to model the system accurately. Allowing for the complication in modeling the effects of seabed restraint, a technique based on the bilinear spring concept is developed to calculate the soil properties. Then, based on a pipeline project, the entire procedure of stress analysis is discussed in detail, including creation of an FE model, processing of input data and analysis of results. A wide range of loading schemes is investigated to ascertain that the stresses remain within the acceptable range of the pipe material strength. Finally, the effects of the location of flanges, the thermal expansion of submarine pipelines and the seabed restraint on stress distribution in the riser and expansion loop are studied, which are valuable for pipeline designers.     

Numerical Simulation of Non-Linear Wave Propagation in Waters of Mildly Varying Topography with Complicated Boundary

In this paper, the characteristics of different forms of mild slope equations for non-linear wave are analyzed, and new non-linear theoretic models for wave propagation are presented, with non-linear terms added to the mild slope equations for non-stationary linear waves and dissipative effects considered. Numerical simulation models are developed of non-linear wave propagation for waters of mildly varying topography with complicated boundary, and the effects are studied of different non-linear corrections on calculation results of extended mild slope equations. Systematical numerical simulation tests show that the present models can effectively reflect non-linear effects.     

最短路径算法在旅游线路规划中的应用——以庐山为例

本文以庐山旅游风景区为例,以一日游为主题,结合旅游景区景点知名度和各景点的停留时间,改进了G IS中的最短路径算法,利用VC++分析旅游区内各个景点之间的最短路径关系,得出该旅游区内的三条较合理的不同主题的一日游路线。通过本文的研究,希望能加强对庐山风景区的开发力度,促进庐山风景区的发展,并最终能推广G IS在旅游线路规划中的应用。     

鄂尔多斯坳陷湖盆缓坡型三角洲前缘沉积微相分带及成因分析——以定边-安边地区延长组长6油组为例

运用沉积相分析理论对鄂尔多斯盆地定边-安边地区晚三叠世延长组坳陷湖盆缓坡型三角洲前缘沉积微相组合进行系统研究,共识别出其组合形式有:水下分流河道叠加组合、河口坝叠加组合、水下分流河道与河口坝叠加组合以及河口坝与远砂坝、席状砂的叠加组合等4大类9种类型。并深入研究三角洲前缘沉积微相组合的时空分布规律,以三角洲前缘坡折带为界,将三角洲前缘分为"台型前缘"、"坡型前缘"和"盆型前缘"三部分,各部分有独特的沉积微相组合形式。高分辨率层序地层学的基准面旋回原理和沉积物体积分配原理表明:短期基准面的规律性变化影响着储层砂体的成因类型、叠加组合形式和空间分布规律,据此建立坳陷湖盆三角洲前缘不同沉积微相组合的成因分布模式。     

静态精密单点定位精度分析

阐述了精密单点定位技术的应用价值,分析了观测数据和精密钟差采样间隔对静态精密单点定位的影响,提供了工程实际使用有益的参考.     

点质模型求定月球重力场及其特征分析

利用Lunar-Prospector扩展任务的视线加速度数据,根据点质模型恢复了月球近区的重力场,将其与LP165月球重力场模型进行了比较和分析,并利用恢复的重力场联合月球地形数据对Mas-con进行分析,总结了月球重力场的主要特征及其研究方向发展趋势,将重力场恢复技术与我国的探月计划-"嫦娥"工程结合起来,为建立高精度的月球重力场和地形模型提供了一种有效而实用的方法。     

Geochemical characteristics and source analysis of inflow of mine water in Wang’ershan Gold Mine, Shandong

Through a systematic observation of water level and temperature, and a comprehensive analysis of the data on major/trace elements, nitrite, hydrogen-oxygen isotopes, the conclusion has been drawn that there are two relatively independent groundwater systems (cool water and hot water), and the geochemical indicators of hot/cool waters are described. The cool water system is relatively enriched in Ca2 , Mg2 and HCO3-. Its TDS is relatively low, about 1400–1800 mg/L. The hot water system is relatively enriched in K , Na , Cl- and SO42-. Its TDS is relatively high, about 2200–2300 mg/L. The cool water system is enriched in Ba, Ga, Cd, and the hot water system is enriched in B, Ti, Cr, Ni, Cu, Mo, Rb, and Cs, relatively. Especially, the contents of Rb and Cs in the hot water system are more than five times as high as those in the cool water system. The NO3- contents of cool water discharged from the gold mine are relatively high, and those of hot water are extremely low. The δD and δ18O values follow an increasing order of surface water>mine cool water>mine hot water. The cool water comes mainly from the lateral supply of phreatic water, while the hot water comes mainly from the vertical supply of deeply circulating structure-fracture water. The ratio of cool water over hot water was estimated to be about 1:1 by a water quality model..