大型敞流坳陷湖盆浅水三角洲与湖盆中心砂体的形成与分布

大型敞流坳陷湖盆浅水三角洲及湖盆中心砂体已成为中国陆相盆地岩性油气藏最重要的勘探目标。通过对现代典型湖盆浅水三角洲的深入分析,结合我国中、新生代大型坳陷湖盆浅水三角洲及湖盆中心砂体的地质研究,取得以下主要进展与认识：①在分析浅水三角洲形成地质背景的基础上,按照供源体系、湖水深度及三角洲前缘倾斜坡度将湖盆三角洲分为9种成因结构类型;②建立了毯式浅水曲流河三角洲的沉积模式,指出末端分流河道及末端决口扇是浅水曲流河三角洲的典型微相类型;③分析了浅水三角洲砂体大面积分布的形成条件,指出敞流湖盆是湖盆中心浅水三角洲砂体发育的重要条件,敞流通道对湖盆中心砂体分布有重要控制作用;④湖盆中心发育河流、三角洲、湖流及密度底流砂体等牵引流成因砂体,也发育洪水浊积扇及滑塌浊积扇等重力流成因砂体;⑤大型浅水三角洲体系三级层序界面对岩性（成岩）圈闭的发育有重要控制作用,三角洲平原带层序界面上覆叠置砂体富集岩性油气藏,勘探潜力大。本文研究成果希对坳陷湖盆沉积学研究及岩性油气藏勘探能有推动作用。     

塔里木盆地塔中1井藻纹层白云岩与竹叶状白云岩成因——基于岩石学、元素与同位素地球化学的厘定

塔里木盆地寒武系—奥陶系底部发育了大量的白云岩, 白云岩中赋存丰富的油气资源, 但是由于塔里木盆地白云岩研究基础薄弱,限制了塔里木盆地白云岩型油气藏的勘探。本文选择塔中地区塔中1井下奥陶统藻纹层白云岩与夹层竹叶状白云岩作为对象,应用岩石学与地球化学方法对其成因问题进行了研究。藻纹层白云岩与夹层竹叶状白云岩的宏观构造与微观结构指示其可能形成于高能的潮坪环境;低有序度值（0.6）与塔北地区中寒武统阿瓦塔格组潮坪同沉积白云岩(有序度值0.61)特点一致,指示该白云岩结晶速率较快;同时,高Fe、Mn含量与低U、Mo含量也与氧化环境的潮坪相一致。藻纹层白云岩与夹层竹叶状白云岩δ18O值非常集中, 变化在-7.4‰～-5.8‰;87Sr/86Sr组成变化很小,在0.709015～0.709276之间,与前人报道的晚寒武世－早奥陶世海水同位素特征一致,同时白云岩的稀土元素配分模式也与下奥陶统泥晶灰岩一致,指示了白云岩的沉积/成岩物质来源于蒸发海水;白云岩δ13C值变化从-2.5‰～+1.6‰,并有着随深度增加而升高的变化规律,可能指示了古海洋的碳同位素氧化。藻纹层白云岩与夹层竹叶状白云岩的构造特点具有原生沉积特征,同时白云岩CaO与MgO含量的正相关关系也支持该白云岩原生沉积特点。因此,塔里木盆地塔中1井钻遇的下奥陶统藻纹层白云岩与夹层竹叶状白云岩为潮坪环境下,从蒸发海水中快速沉积形成的。     

用随机介质模型方法描述孔洞型油气储层

孔洞型储集层具有强烈的非均质性,在空间分布上变化剧烈,规律性差,其地球物理参数(如速度、密度、弹性参数等)在空间上的变化很难用传统的层状介质模型进行刻画.本文借助随机模型方法,研究孔洞型储层中不同孔洞尺度、分布密度与模型参数的关系,建立反映实际孔洞油气储层介质地球物理参数空间分布统计特征的随机介质模型,以更方便地对孔洞型油气储层进行描述,并为碳酸盐岩孔洞型储层地震反射特征的研究提供有效的方法途径.     

塔里木盆地满加尔凹陷西缘奥陶系柯坪塔格组下段海相砂岩准层序成因与意义

通过精细岩芯描述、单井沉积微相分析与地震相、测井相综合研究,认为在塔里木盆地满加尔凹陷西缘奥陶系柯坪塔格组下段顶部含油气砂体中,发育3种类型的准层序：①粒级由底部粗—中下部细—上部粗的、反映整体向上变浅的海侵滞留沉积—海泛泥岩—滨岸沉积准层序,羊屋2井5460~5468 m含油气段位于该准层序内;②粒级向上变粗的滨外泥岩—临滨－前滨沉积,顶部受风暴影响的准层序,跃南2井6503~6512 m含油气段位于该准层序内;③粒级向上变细的潮下带—潮间带沉积的准层序,吉南1井5465~5486 m含油气段属于此准层序。发育于羊屋2井中的第一种准层序内含油气砂体在时间上属于较早的准层序3,发育于跃南2井、哈得13井中的第二种准层序与吉南1井中的第三种准层序内的含油气砂体属于稍晚的准层序4。早期沉积的、发育于羊屋2井顶部的第一种准层序是有利储层发育段,该井区以北靠近柯坪塔格组下段顶面尖灭线附近的准层序3时期沉积的临滨相储层是油气聚集成藏的有利部位。     

Occurrence and evolution of the Xiaotangshan hot spring in Beijing, China

Thermal groundwater occurs in bedrock aquifers consisting of the dolomite of the Wumishan Group of the Jixianin System and the Cambrian carbonate in the Xiaotangshan geothermal field near the northern margin of the North China Plain, China. The hot water in the geothermal field of basin-type discharges partly in the form of the Xiaotangshan hot spring under natural conditions. The hot water has TDS of less than 600 mg/L and is of Na·Ca-HCO₃ type. The geothermal water receives recharge from precipitation in the mountain area with elevation of about 500 m above sea level to the north of the spring. Thermal groundwater flows slowly south and southeast through a deep circulation with a residence time of 224 years estimated with the Ra–Rn method. The Xiaotangshan hot spring dried up in the middle of the 1980s owing to the increasing withdrawal of the hot water in the geothermal field in the past decades. The water level of the geothermal system still falls continually at an annual average rate of about 2 m, although water temperature changes very little, indicating that the recharge of such a geothermal system of basin-type is limited. Over-exploitation has a dramatic impact on the geothermal system, and reduction in exploitation and reinjection are required for the sustainable usage of the hot water.     

Recharge source and hydrogeochemical evolution of shallow groundwater in a complex alluvial fan system,southwest of North China Plain

Many cities around the world are developed at alluvial fans. With economic and industrial development and increase in population, quality and quantity of groundwater are often damaged by over-exploitation in these areas. In order to realistically assess these groundwater resources and their sustainability, it is vital to understand the recharge sources and hydrogeochemical evolution of groundwater in alluvial fans. In March 2006, groundwater and surface water were sampled for major element analysis and stable isotope (oxygen-18 and deuterium) compositions in Xinxiang, which is located at a complex alluvial fan system composed of a mountainous area, Taihang Mt. alluvial fan and Yellow River alluvial fan. In the Taihang mountainous area, the groundwater was recharged by precipitation and was characterized by Ca–HCO₃ type water with depleted δ¹⁸O and δD (mean value of −8.8‰ δ¹⁸O). Along the flow path from the mountainous area to Taihang Mt. alluvial fan, the groundwater became geochemically complex (Ca–Na–Mg–HCO₃–Cl–SO₄ type), and heavier δ¹⁸O and δD were observed (around −8‰ δ¹⁸O). Before the surface water with mean δ¹⁸O of −8.7‰ recharged to groundwater, it underwent isotopic enrichment in Taihang Mt. alluvial fan. Chemical mixture and ion exchange are expected to be responsible for the chemical evolution of groundwater in Yellow River alluvial fan. Transferred water from the Yellow River is the main source of the groundwater in the Yellow River alluvial fan in the south of the study area, and stable isotopic compositions of the groundwater (mean value of −8.8‰ δ¹⁸O) were similar to those of transferred water (−8.9‰), increasing from the southern boundary of the study area to the distal end of the fan. The groundwater underwent chemical evolution from Ca–HCO₃, Na–HCO₃, to Na–SO₄. A conceptual model, integrating stiff diagrams, is used to describe the spatial variation of recharge sources, chemical evolution, and groundwater flow paths in the complex alluvial fan aquifer system.     

Assessment of frozen-ground conditions for engineering geology along the Qinghai–Tibet highway and railway, China

The Qinghai–Tibet Highway and Railway (the Corridor) across the Qinghai–Tibet Plateau traverses 670 km of permafrost and seasonally frozen-ground in the interior of the Plateau, which is sensitive to climatic and anthropogenic environmental changes. The frozen-ground conditions for engineering geology along the Corridor is complicated by the variability in the near-surface lithology, and the mosaic presence of warm permafrost and talik in a periglacial environment. Differential settlement is the major frost-effect problem encountered over permafrost areas. The traditional classification of frozen ground based on the areal distribution of permafrost is too generalized for engineering purposes and a more refined classification is necessary for engineering design and construction. A proposed classification of 51 zones, sub-zones, and sections of frozen ground has been widely adopted for the design and construction of foundations in the portion of the Corridor studied. The mean annual ground temperature (MAGT), near-surface soil types and moisture content, and active faults and topography are most commonly the primary controlling factors in this classification. However, other factors, such as local microreliefs, drainage conditions, and snow and vegetation covers also exert important influences on the features of frozen ground. About 60% of the total length of the Corridor studied possesses reasonably good frozen-ground conditions, which do not need special mitigative measures for frost hazards. However, other sections, such as warm and ice-rich or -saturated permafrost, particularly in the sections in wetlands, ground improvement measures such as elevated land bridges and passive or proactive cooling techniques need to be applied to ensure the long-term stability of thermally unstable, thick permafrost subsoils, and/or refill with non-frost-susceptible soils. Due to the long-history of the construction and management of the Corridor by various government departments, adverse impacts of construction and operation on the permafrost environment have been resulted. It is recommended that an integrated, executable plan for the routing of major construction projects within this transportation corridor be established and long-term monitoring networks installed for evaluating and mitigating the impact from anthropogenic and climatic changes in frozen-ground conditions.     

Diamond formation in sulfide pyrrhotite-carbon melts: Experiments at 6.0–7.1 GPa and application to natural conditions

Experiments at 6.0–7.1 GPa and 1500–1700°C were carried out to explore the boundary conditions of diamond nucleation and growth in pyrrhotite-carbon melt-solutions. Pyrrhotite is one of the main sulfide minerals of the pyrrhotite-pentlandite-chalcopyrite assemblage of mantle rocks and primary inclusions in diamond. Solutions of carbon in sulfide melts oversaturated with respect to diamond at the expense of the dissolution of starting graphite (thermodynamically unstable phase) are formed owing to the difference between the solubilities of graphite and diamond, which increases under the influence of temperature gradients in experimental samples. We determined the fields of carbon solutions in pyrrhotite melt showing labile and metastable oversaturation with respect to diamond, which correspond to the spontaneous nucleation of the diamond phase and diamond growth on seeds, respectively. The linear growth rate of diamond in sulfide-carbon melts is rather high (on average, 10 μ/min during the first 1–2 min from the onset of spontaneous crystallization). The nucleation density is estimated as 180 grains per cubic centimeter. Diamonds crystallized from sulfide melts show octahedral and spinel twin shapes. Diamond polycrystals were synthesized for the first time from a sulfide medium as intergrowths of skeletal (edge) or “cryptocrystalline” microdiamonds, from 1 to 100 μm in size, their spinel twins and, occasionally, polysynthetic (star-shaped) twins. During diamond growth from sulfidecarbon melts on smooth faces of cuboctahedral diamond seeds synthesized in metal systems, smooth-faced layer-by-layer step-like growth was observed on their octahedral (111) faces, whereas growth on the (100) cubic faces produced rough-surfaced layers of intergrown micropyramids, whose axes were oriented normal to the (100) face. The obtained experimental results were applied to the problem of diamond genesis under the conditions of the Earth’s mantle in the framework of the model of carbonate-silicate parental melts with blebs of immiscible sulfide melts.     

Experimental study of fluorine and chlorine contents in mica (biotite) and their partitioning between mica,phonolite melt,and fluid

This paper reports the results of a study of the composition of mica (biotite) crystallizing in the system of phonolite melt-Cl- and F-bearing aqueous fluid at T ～ 850°C, P = 200 MPa, and \(f_{O_2 } \) = Ni-NiO, as well as data on F and Cl partitioning between coexisting phases. It was established that Cl content in mica is significantly lower than in phonolite melt and, especially, in fluid. Fluorine shows a different behavior in this system: its content in mica is always higher than in phonolite melt but lower than in fluid. The mica-melt partition coefficients of Cl and F also behave differently. The Cl partition coefficient gradually increases from 0.17 to 0.33 with increasing Cl content in the system, whereas the partition coefficient of F sharply decreases from 3.0 to 1.0 with increasing total F content. The apparent partition coefficients of F between biotite and groundmass (melt) in various magmatic rocks are usually significantly higher than the experimental values. It was supposed that the higher ^Bt/glassD_F values in natural samples could be related to the influence of later oxidation reactions, reequilibration of biotite at continuously decreasing \(f_{H_2 O} \)/f _HF ratio, and an increase in this coefficients with decreasing total F content in the system.     

A strong temperature effect on U/Ca in planktonic foraminiferal carbonates

Three planktonic foraminiferal species Globigerina bulloides, Neogloboquadrina pachyderma (d), and Globorotalia inflata collected from core-tops spanning 35° to 65°N in the North Atlantic were used for U/Ca and Mg/Ca and foraminiferal shell weight analyses. Except for U/Ca in G. bulloides calcified under warm conditions (>∼13 °C), U/Ca ratios in all three studied species increase with decreasing latitude and show strong positive correlations with Mg/Ca ratios. A dissolution effect on planktonic U/Ca is suggested by decreased shell weight and U/Ca and Mg/Ca ratios for shells from very deep water depth (>4.4 km) along the latitudinal transect. G. bulloides from down core samples in the North Atlantic show low U/Ca ratios during the last glacial and high ratios during the Holocene, similar to the Mg/Ca evolution trend. In general, our data indicate that the U incorporation into planktonic foraminiferal carbonates is strongly influenced by calcification temperature, although U/Ca in G. bulloides may be affected by seawater carbonate ion concentration under warm conditions and/or other factors.