Strontium concentrations and strontium-chlorinity ratios in sea water of the North Pacific and the adjacent seas of Japan

Strontium contents of 232 sea water samples collected at various stations in the North Pacific and adjacent seas of Japan were measured by the atomic absorption spectrophotometry and strontium-chlorinity ratios were determined. Mean Sr concentration is 8.08 mg/kg and mean Sr/Cl ratio is 0.425 mg/kg/Contrary to some recent reports, regional and vertical variations of Sr/Cl ratios were statistically insignificant, and presence of particulate strontium was not confirmed.     

Simultaneous vertical measurements of in situ pH and CO2 in the sea using spectrophotometric profilers

We have developed new systems capable of profiling to >1000 m for measuring in situ pH and fugacity of CO₂ (fCO₂) in the ocean using spectrophotometric analysis (pH and CO₂ profilers). The in situ pH is determined by detecting the color change of the pH indicator (m-cresol purple). It can withstand ambient pressure to 1000 m depth. The CO₂ profiler analyzed in situ fCO₂ by detecting the change of pH in an inner solution, equilibrated with the seawater through a gas permeable membrane. It can be operated to 2500 m depth. We used an amorphous fluoropolymer tubing form of AF-2400 for the gas permeable membrane due to its high gas permeability coefficients. The inner solution was a mixture of 2 μM bromocresol purple (BCP) and 5 μM sodium hydroxide. This system gave us a response time of 1 minute, which is twice as fast as previous systems. The precisions of pH and CO₂ profilers were within 0.002 and 2.5% respectively. We have used these profilers to study the North Pacific, obtaining good agreement with the difference between the data from profilers and a discrete bottle of 0.002 ± 0.005 pH (SE, n = 25) and −0.4 ± 3 μatm (SE, n = 31).     

Southward intrusion of the intermediate Oyashio water along the east coast of the Boso Peninsula I. Coastal salinity-minimum-layer water off the Boso Peninsula

Index species of zooplankton of the Oyashio water are found in and beneath the salinity minimum layer in Sagami Bay. In order to clarify the intrusion path of the intermediate Oyashio Water (or the water of the Mixed Water Region), the oceanographic conditions off the Boso Peninsula are studied by using available hydrographic data obtained mainly by Japan Meteorological Agency. The cross-sectional salinity distribution along KJ line which extends southeastward from off the tip of the peninsula always indicates the existence of a low salinity patch just off the coast in the salinity minimum layer. This water is well separated from the offshore low salinity water which is considered as the water in the western margin of the so-called North Pacific Intermediate Water. We refer to the former water as the coastal salinity-minimum-layer (SML) water and to the latter as the offshore SML water. The coastal SML water is usually bounded by the current zone of the Kuroshio. The existence of the coastal SML water seems to indicate the possible pathway of the intermediate Oyashio water along the Boso Peninsula into Sagami Bay. The detailed water type analysis is made in T-S plane, S-_st plane, and O₂-_st plane. There is no significant difference in distribution ranges of the water types between the coastal SML water and the offshore SML water. However, the water types of the coastal SML water is not uniformly distributed, and the water can be classified into two groups: group A with relatively high oxygen content and relatively low salinity value and group B with relatively low oxygen content and relatively high salinity value. Group A is thought to be associated with strong event-like intrusions, the details of which will be discussed in Part II.     

Numerical Simulations of Sea Surface Cooling by a Mixed Layer Model during the Passage of Typhoon Rex

In order to investigate the formation mechanism of rapid decrease of maritime sea surface temperature (SST) observed by R/V Keifu Maru, the ocean response to Typhoon Rex is simulated using a mixed layer model. The rapid decrease of the maritime SST is successfully simulated with realistic atmospheric forcing and an entrainment scheme of which sources of turbulent kinetic energy (TKE) are production due to wind stress, generation during free convection, and production due to current shear. The rapid decrease at the observed station by R/V Keifu Maru is not produced by instant atmospheric forcing but is mainly produced by entrainment on the right side of the running typhoon as a part of cooling area during its passage, and remained during a few days. The sea surface cooling (SSC) is evident along the track and on the right side of the running typhoon, which is similar to the SSC of satellite observation by TRMM/TMI. The conspicuous SSC produced by both entrainment and upwelling is situated just under the track of typhoon when the typhoon moves slower. Intercomparison of entrainment schemes of the mixed layer model is implemented. Frictional velocity and buoyancy effects are effective for a gradual SSC covering the wide region. In contrast, the effect of current shear at the mixed layer base is related to the amount of SSC and the sharp horizontal gradient of SSC. The entrainment scheme including all three TKE sources has the best performance for SSC simulation.     

Behavior of fresh water injected at the surface of a uniformly rotating ocean

The behavior of low density fresh water injected at the surface of a uniformly rotating saline water was investigated on the basis of a tank experiment. The injected water mass shows a clockwise circulation and grows gradually with an axisymmetric convex shape, until it breaks into two vortices at a critical size. An experimental formula for the change of radius of the water mass with time for the axisymmetric stage is obtained. It is shown that within our experimental range of values the radius of the water mass increases almost in proportion tot ^1/2, wheret is the elapse time, while the inviscid theory indicates that the radius should increase in proportion tot ^1/4. The dependence of the radius on elapse time is essential for forecasting the extent of discharged waters. The position of the maximum azimuthal velocity is fixed at \(V = - ge^{ - a^2 q^2 } \) within our experimental range of values wherer is the radial coordinate,f the Coriolis parameter,v the viscosity coefficient andQ the flow rate of injection, respectively. This radius corresponds to the radial scale derived by Gillet al. (1979). The steadiness of the position of the maximum azimuthal velocity may be essential in partition of the water mass into inner and outer regions and in the understanding the derived experimental formula. The critical radius for breaking is also investigated. The radius is shown to be independent ofQ and to be almost proportional to (Δ _ρ / _ρ )^1/2 f ^-1 whereρ is the density of the saline water andΔρ the density difference between the saline and injected waters. Even after the water supply is cut off in the axisymmetric stage, the radius of the water mass increases at almost the same rate as before, while its thickness decreases. The behavior after supply cut-off is discussed in the Appendix.     

Autocovariance function and power spectrum of the vertical temperature gradient in the thermocline

The nature of the autocovariance function and power spectrum of time series of spike-array type is discussed. As the spacing of spikes is not easily seen directly in power spectrum, prudence should be exercised in interpreting the gradient spectrum of oceanic fine-structure. We calculated the autocovariance function and lag joint probability density of the record of the vertical profile of the vertical temperature gradient measured in the San Diego Trough. The results obtained support the results of the bispectral analysis in the previous paper (Nagata, 1978) that the predominant length scale of about 5 m has two meanings: spacing of the spikes and wavelength of a sinusoidal wave. The results seem to show the existence of nernal waves having a vertical wavelength the same as the spacing of the spikes or the thickness of the homogeneous layer in the oceanic fine-structure.     

Benthic Front and the Yamato Basin Bottom Water in the Japan Sea

Hydrographic observations have revealed detailed structure of the Bottom Water in the Japan Sea. The Yamato Basin Bottom Water (YBBW) exhibits higher temperatures and lower dissolved oxygen concentrations than those found in the Japan Basin Bottom Water (JBBW). Both Bottom Waters meet around the boundary region between the Yamato and the Japan Basins, forming a clear benthic front. The structure of the benthic front suggests an estuary-like water exchange between both Basins, with the inflow from the Japan Basin passing under the outflow from the Yamato Basin. It is inferred from the property distributions that the JBBW flowing into the Yamato Basin is entrained by the cyclonic circulation in the basin, and modified to become the YBBW. Vertical diffusion and thermal balance in the YBBW are examined using a box model. The results show that the effect of geothermal heating has about 70% of the magnitude of the vertical thermal diffusion and both terms cancel the advection term of the cold JBBW from the Japan Basin. The box model also estimates the turnover time and vertical diffusivity for the YBBW as 9.1 years and 3.4 × 10⁻³ m²s^{− 1}, respectively.     

Stokes' expansion of internal deep water waves to the fifth order

Stokes' expansion is applied to the internal waves of finite amplitude, which propagate on the interface between two layers of infinite thickness. Stream function, wave profile, phase velocity and mass transport velocity are given in the fifth order approximation. It is shown that (a) phase velocity increases with increase of wave steepness, (b) mass transport appears in the direction of the wave propagation in both layers as in the case of the surface waves, and (c) when the density difference is very small, the wave profile is flattened not only at the troughs but also at the crests.     

Skewed Water Temperature Occurrence Frequency in the Sea off Sanriku, Japan, and Intrusion of the Pure Kuroshio Water

Temperature and salinity data obtained by the Iwate Fisheries Technology Center were analyzed for the period 1971–1995. It was found that occurrence frequency distributions of temperature and salinity are very skewed at depths deeper than 200 m and that temperature sometimes exceeds m + 5σ (m: mean and σ: standard deviation. If such abnormally high temperatures are real the 3σ criterion cannot be adopted. Oceanic conditions were surveyed in 1972 and 1979, when temperatures exceeding m + 5σ were observed. It was found that the abnormally high temperature (and high salinity) water was the pure Kuroshio Water introduced into the region due to some special conditions such as abnormal approach of large warm-core ring to the Sanriku Coast or abnormal northward extension of the Kuroshio along the coast. These events are very rare, occurring only twice in the 25-year period analyzed, but the abnormally high temperature observed is real. This revised version was published online in July 2006 with corrections to the Cover Date.     

Water wedge advancing along the interface between two homogeneous layers

The behavior of the water wedge advancing along the interface between two homogeneous layers is investigated experimentally. The horizontally intruding wedge is strongly influenced by the detailed structure of the interface, even when the interface is sharp enough for its position to be visually determined. Within our experimental range, the intrusion velocity is very slow and depends on the thickness of the interface along which the water wedge intrudes. The wedge length is well described by the relation which is derived using an analogy to the linearly stratified case. The results could be useful for understanding the generation mechanism of the oceanic microstructure.