Experimental partitioning of trace elements into schreibersite with applications to IIG iron meteorites

Some of the defining characteristics of the IIG iron meteorite group are their high bulk P contents and massive, coarse schreibersite, which have been calculated to make up roughly 11–14 wt% of each specimen. In this study, we produced two data sets to investigate the formation of schreibersites in IIG irons: measurements of trace elements in the IIG iron meteorite Twannberg and experimental determinations of trace element partitioning into schreibersite. The schreibersite‐bearing experiments were conducted with schreibersite in equilibrium with a P‐rich melt and with bulk Ni contents ranging from 0 to 40 wt%. The partitioning behavior for the 20 elements measured in this study did not vary with Ni content. Comparison of the Twannberg measurements with the experimental results required a correction factor to account for the fact that the experiments were conducted in a simplified system that did not contain a solid metal phase. Previously determined solid metal/P‐rich melt partition coefficients were applied to infer schreibersite/solid metal partitioning behavior from the experiments, and once this correction was applied, the two data sets showed broad similarities between the schreibersite/solid metal distribution of elements. However, there were also differences noted, in particular between the Ni and P contents of the solid metal relative to the schreibersite inferred from the experiments compared to that measured in the Twannberg sample. These differences support previous interpretations that subsolidus schreibersite evolution has strongly influenced the Ni and P content now present in the solid metal phase of IIG irons. Quantitative attempts to match the IIG solid metal composition to that of late‐stage IIAB irons through subsolidus schreibersite growth were not successful, but qualitatively, this study corroborates the striking similarities between the IIAB and IIG groups, which are highly suggestive of a possible genetic link between the groups as has been previously proposed.     

Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

Phase Shift between Changes in Global Temperature and Atmospheric CO2 Content under External Emissions of Greenhouse Gases into the Atmosphere

Izvestiya, Atmospheric and Oceanic Physics - The phase shift between changes in the global surface temperature Tg and atmospheric CO2 content $${{q}_{{{\text{C}}{{{\text{O}}}_{2}}}}}$$ has been...     

Integration of Electrofacies and Hydraulic Flow Units to Delineate Reservoir Quality in Uncored Reservoirs: A Case Study,Nubia Sandstone Reservoir,Gulf of Suez,Egypt

Natural Resources Research - Recognition of reservoir quality is an important objective in reservoir characterization process. By definition, the quality of a reservoir is described by its...     

The <Emphasis Type="Italic">Wind</Emphasis>/EPACT Proton Event Catalog (1996 – 2016)

We present the finalized catalog of solar energetic proton events detected by the Wind/EPACT instrument over the period 1996?–?2016. Onset times, peak times, peak proton intensity and onset-to-peak proton fluence are evaluated for the two available energy channels, at about 25 and 50 MeV. We describe the procedure utilized to identify the proton events and to relate them to their solar origin (in terms of flares and coronal mass ejections). The statistical relationships between the energetic protons and their origin (linear and partial correlation analysis) are reported and discussed in view of earlier findings. Finally, the different trends found in the first 8 years of Solar Cycles 23 and 24 are discussed.     

Simulating the Propagation of Infrasonic Waves and Estimating the Energy of the Chelyabinsk Meteoroid Explosion Observed on February 15, 2013

Results obtained from simulating the propagation of infrasonic waves from the Chelyabinsk meteoroid explosion observed on February 15, 2013, are given. The pseudodifferential parabolic equation (PDPE) method has been used for calculations. Data on infrasonic waves recorded at the IS31 station (Aktyubinsk, Kazakhstan), located 542.7 km from the likely location of the explosion, have been analyzed. Six infrasonic arrivals (isolated clearly defined pulse signals) were recorded. It is shown that the first “fast” arrival (F) corresponds to the propagation of infrasound in a surface acoustic waveguide. The rest of the arrivals (T1–T5) are thermospheric. The agreement between the results of calculations based on the PDPE method and experimental data is satisfactory. The energy E of the explosion has been estimated using two methods. One of these methods is based on the law of conservation of the acoustic pulse I, which is a product of the wave profile area S/2 of the signal under analysis and the distance to its source E _I [kt] = 1.38 × 10^–10 (I [kg/s])^1.482. The other method is based on the relation between the energy of explosion and the dominant period T of recorded signal E _T [kt] = 1.02 × (T [s]²/σ)^3/2, where σ is the dimensionless distance determining the degree of nonlinear effects during the propagation of sound along ray trajectories. According to the data, the explosion energy E _I,T ranges from 1.87 to 32 kt TNT.     

民间信仰载体的地域格局及其影响因素——以兰州市榆中县祠庙文化为例

以祠庙祭祀为主体且祠庙保存良好的民间信仰是甘肃陇中地区民间文化的重要组成。甘肃陇中地区的民间信仰具有很强的趋同性，本文以陇中地区的榆中县为例，以各村的祠庙为民间文化载体，通过核密度分析、Logistic回归等方法探讨榆中县民间文化载体的空间分布及其影响因素对于探讨陇中地区人地关系，保护和弘扬民俗文化有着重要意义。研究结果表明：（1）根据已有研究将榆中县民间信仰归纳为山神信仰、水神信仰、天地信仰、女性信仰、英雄崇拜和祖先崇拜，祖先崇拜的祠庙数量占有重要地位；（2）榆中县祠庙主要分布在西北黄河南岸、中部陇海铁路沿线及南部风景名胜集聚区，村级层面空间差异不显著、乡镇空间差异相对较大。通过核密度分析，不同类别民间信仰空间分布热点各有不同；（3）榆中县民间信仰空间分布受到区位条件限制，民间信仰的祠庙多位于海拔高度较低、人口密度较大、交通可达性较好的地区，坡度和到水源的距离成为山神信仰和水神信仰祠庙空间分布显著的影响因子，榆中县祠庙呈现出山神信仰类祠庙“依山”，水神信仰类祠庙“傍水”的空间特点。     

Daily-Seasonal Variation in the Number of Remotely Observed,Pulsed, ULF Electromagnetic Earthquakes and the Spatial Distribution of Their Generation Zones on the Earth’s Surface

Geomagnetism and Aeronomy - Based on data from long-term observations at two geophysical observatories, Borok and College, distantly spaced in latitude and longitude, the results of remote...     

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.