越南岸外上升流区48万年来高分辨率的生源组分记录及其古海洋学意义

南海西部越南岸外MD05-2901孔沉积物分析显示,该孔覆盖氧同位素1-12期,底界年龄约为48万年。生源组分记录显示表层古生产力冰期高、间冰期低,体现间冰期海平面下降、陆源物质输入增强的影响。生产力在末次冰期达到最高,体现末次盛冰期海陆差异增强,东北风发育对生产力提高的促进作用。碳酸钙含量变化呈现冰期早期含量低、冰消期和间冰期含量高的趋势。其冰消期的高值在MIS1/2、MIS3/4和MIS5/6分界处,与浮游有孔虫碳同位素低值对应,揭示该地区的碳酸钙沉积旋回是“稀释旋回”。同时碳酸钙含量变化领先于同一地区浮游有孔虫氧同位素的变化,证明低纬海区碳酸钙泵作用对大气二氧化碳浓度和温度有影响。滤波分析结果显示碳同位素存在23 ka的岁差周期和偏心率长周期,生源组分的含量变化显示出典型的岁差周期,体现南海季风环流的轨道响应,证明低纬热带过程是调节气候变化的重要因素。     

碳水化合物的组合合成

碳水化合物的组合合成是一项新兴技术，该技术可以在短时间内合成大量用于进行生物活性筛选的寡糖及拟糖物。液相与固相合成技术可以极大地加快药物研究与开发进程。作者针对该技术在碳水化合物合成方面的研究进展情况进行讨论。     

海洋细菌抑菌活性菌株的筛选

从不同海区的海洋底质，生物样，水样中分离到480株海洋细菌，其中包括150株芽孢细菌和108株粪大肠杆菌，利用纸片法对其抑菌活性进行检测，结果表明：117株海洋细菌具有抑菌活性，占总分离菌株的24.4%；一般细菌，芽孢细菌，粪大肠杆菌的抑菌活性菌株分别占各供测菌株的17.1%,27.3%,35.2%；抑菌活性菌株的比例与样品来源密切相关，且各类海洋细菌的抗菌谱有很大的不同。     

The Effect of Internal Fluid on the Response of Vortex-Induced Vibration of Marine Risers

Based on Iwan‘s wake oseillator model developed with the classical van der Pol equalion, the differential equation for the response of the vortex-induced vihration (VIV) of the riser considering the effect of the internal flowing fluid and the external marine environmental condition is derived. The effect of the intermal flowing fluid on the response of VIV of the riser is studied by means of the Finite Element Method. The results show that the effect of the internal fluid velocity on the VIV of the riser is strong when the natural frequency of the riser is close to the vortex shedding frequency. In addition, the increase of the top tension can decrease the sensitivity of the riser to the internal fluid velocity.     

乐清湾港池开挖后骤淤可能性分析

乐清湾避风条件好,潮流动力强,含沙量小,具有较好的建港条件。通过对骤淤机理的分析和试挖槽在台风期间的监测以及大风浪下的悬沙淤积的估算等多种研究后,认为乐清湾港池开挖后不会发生骤淤,实行浅水深用的开发方案是可行的。     

闽江河口区湿地生态旅游环境容量研究

本文讨论了生态旅游环境容量的定义及内涵，分析了生态旅游环境容量的特征及构成，在此基础上估算了闽江河口区湿地生态旅游环境容量．结果表明：闽江河口区湿地生态旅游环境容量的限制因子是鳝鱼滩自然保护区生态旅游环境空间容量．鳝鱼滩旅游步行道可分成南路和北路，北路为水路游线，南路为陆路游线．北路游线环境空间日容量为800人次／d，南路游线环境空间日容量为1144人次／d．鳝鱼滩湿地生态旅游环境空间年容量为451202人次／a．这一环境容量可作为闽江河口区湿地生态旅游活动环境容量的最高限制量．     

基于多源数据的三维城市建模方法

以天津新港三维城市建模为例,介绍了基于二维数据、DEM和3D模型等多源数据的三维城市建模的方法和关键技术。为有效利用现有数据资源快速、准确建立三维城市模型提供了一种经济、灵活、省时、高效的方法。     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

A NUMERICAL MODEL OF PHYTOPLANKTON BIOMASS IN THE CENTRAL WATERS OF SOUTH CHINA SEA

The present study is based on the materials collected from the middle waters of the South China Sea between 12°-15°N and 111°-118°E during May to July in 1978.The biomass of the phytoplankton (Y, dependent variable) is established to give the biomass of each Species and the environmental factors (i. e. water temperature, salinity, oxygen, silicate and phosphate contents), X1,X2...,X139tt are independent variables that are used to stepwisc regression analysis. Accordicg to the mathematical tests and the practical experience by which a lot of species are deleted and added to the equation, the authors consider that the 4th equation as shown below is optimal one for the model of the biomass on the phytoplankton from this waters.The optimal equation refers to text.