Precision rectification of high resolution satellite imagery without ephemeris data

The huge capability of high resolution satellite imageries (HRSI), that includes spatial, spectral, temporal and radiometric resolutions as well as stereoscopic vision introduces them as a powerful new source for the Photogrammetry, Remote Sensing and GIS communities. High resolution data increases the need for higher accuracy of data modeling. The satellite orbit, position, attitude angles and interior orientation parameters have to be adjusted in the geometrical model to achieve optimal accuracy with the use of a minimum number of Ground Control Points (GCPs). But most high resolution satellite vendors do not intend to publish their sensor models and ephemeris data. There is consequently a need for a range of alternative, practical approaches for extracting accurate 2D and 3D terrain information from HRSI. The flexibility and good accuracy of the alternative models demonstrated with KFA-1000 and the well-known SPOT level 1A images. A block of eight KFA-1000 space photos in two strips with 60% longitudinal overlap and 15% lateral sidelap and SPOT image with rational function, DLT, 2D projective, polynomials, affine, conformal, multiquadric and finite element methods were used in the test. The test areas cover parts of South and West of Iran. Considering the quality of GCPs, the best result was found with the DLT method with a RMSE of 8.44 m for the KFA-1000 space photos.     

Fuzzy Logic System for Road Identification Using Ikonos Images

Research into both extraction of man-made objects and automatic change detection from aerial and satellite images has made significant progress in recent years. This paper presents an approach, based on a fuzzy logic system, for the identification of suburban roads in Ikonos images. The linguistic variables are the mean and standard deviation (SD) of different objects with Gaussian membership function. After the roads have been identified provisionally and their skeleton extracted, the skeleton can be vectorised and then used as direct input to a GIS for further analysis. The method was tested on an Ikonos "Geo" image covering Bilesavar in north-western Iran. For the suburban area of Bilesavar, the results showed that grey scale values ranged from 20 to 190 for non-roads and 226 to 228 for roads, the optimum width of the Gaussian kernel function was 3 and the SD was 0.4. It was also found that about 91% of main roads with a width of 6 to 12 pixels could be extracted from high resolution satellite imagery by the algorithm. The computer program for this study has been developed in visual C++ based on Windows 98     

3D Geomechanical Modeling of Casing Collapse in Plastic Formations (Cap Rock of Hydrocarbon Reservoir)

Natural Resources Research - In the Gachsaran Formation, the casing pipes driven into a number of wells have collapsed within a short span of time in one of the southwest fields of Iran. The casing...     

Time-domain two-dimensional site response analysis of non-homogeneous topographic structures by a hybrid BE/FE method

In this paper, an advanced formulation of the time-domain, two-dimensional hybrid finite element–boundary element method (FEM/BEM) is presented, and applied to carry out site response analysis of homogeneous and non-homogeneous topographic structures subjected to incident in-plane motions. Seismic responses of half-plane, horizontally layered site, alluvial valley and ridge sections subjected to incident P and SV waves are analyzed in order to demonstrate the applicability and efficiency of the presented method. The numerical results show that hybrid BE/FE methods require smaller time steps than those needed by BEM schemes. They also show that in case of surface irregularities with height to half-width ratio of up to one, the topography effect could be noticeable, if incident waves have wavelengths of less than approximately eight times the width.     

Assessment of bioclimatic comfort conditions based on Physiologically Equivalent Temperature (PET) using the RayMan Model in Iran

In this study thermal comfort conditions are analyzed to determine possible thermal perceptions during different months in Iran through the Physiologically Equivalent Temperature (PET). The monthly PET values produced using the RayMan Model ranged from ?7.6°C to 46.8°C. Over the winter months the thermal comfort condition (18–23°C) were concentrated in southern coastal areas along the Persian Gulf and Oman Sea. Most of the country experienced comfort conditions during the spring months, in particular in April, while during the summer months of July and August no thermal comfort conditions were observed. In November coastal areas of the Caspian Sea had the same physiological stress level of thermal comfort as April. The map produced showing mean annual PET conditions demonstrated the greatest spatial distribution of comfortable levels in the elevation range from 1000 to 2000 meter a.s.l., with annual temperatures of 12–20°C and annual precipitation of under 200 mm. The statistical relationship between PET conditions and each controlling parameter revealed a significant correlation in areas above 2000 meter, annual temperature over 20°C and annual precipitation of 200–400 mm with a correlation coefficient (R ²) of 0.91, 0.97 and 0.96, respectively.     

Reservoir operation using system dynamics under climate change impacts: a case study of Yamchi reservoir,Iran

This paper proposes a decision support system for Yamchi reservoir operation in semi-arid region of Iran. The paper consists of the following steps: Firstly, the potential impacts of climate change on the streamflow are predicted. The study then presents the projections of future changes in temperature and precipitation under A2 scenario using the LARS-WG downscaling model and under RCP2.6, RCP4.5, and RCP8.5 using the statistical downscaling model (SDSM) in the northwestern of Iran. To do so, a general circulation model of HadCM3 is downscaled by using the LARS-WG model. As a result, the average temperature, for the horizon 2030 (2011–2030), will increase by 0.77 °C and precipitation will decrease by 11 mm. Secondly, the downscaled variables are used as input to the artificial neural network to investigate the possible impact of climate change on the runoffs. Thirdly, the system dynamics model is employed to model different scenarios for reservoir operation using the Vensim software. System dynamics is an effective approach for understanding the behavior of complex systems. Simulation results demonstrate that the water shortage in different sectors (including agriculture, domestic, industry, and environmental users) will be enormously increased in the case of business-as-usual strategy. In this research, by providing innovative management strategies, including deficit irrigation, the vulnerability of reservoir operation is reduced. The methodology is evaluated by using different modeling tests which then motivates using the methodology for other arid/semi-arid regions.     

Stratigraphy,deposition, and structural framework of the cretaceous (review) and 3D geological model of the lower cretaceous reservoirs,Masila oil field,Yemen

The Masila area is located in the Hadhramaut region in east central Yemen. Oil was first discovered in the area in late 1990 with commerciality being declared in late 1991. Oil production began in July 1993. By the end of December 1999, the daily production rate was set at 210,000 stock tank barrels/day (STB/D) of very low gas–oil ratio (GOR) oil under partial to full water drive. About 90% of the reserves are found in the Lower Qishn Clastics Member of the Qishn Formation. This paper focuses on the detailed 3D geological modeling of the Lower Cretaceous Sequence conducted through an integrated study. There are three critical areas in the process of modeling reservoirs that involve geological and geophysical modeling, reservoir characterization, and reservoir flow modeling. This paper presents methodologies found useful during the modeling of these reservoirs including field case histories for the Lower Cretaceous reservoir in the Masila oilfield.     

Three‐dimensional finite element study of arching behavior in slope/drilled shafts system

Two‐dimensional slope stability analysis for a slope with a row of drilled shafts needs a mechanism to take into account the three‐dimensional effect of the soil arching due to the spaced drilled shafts on slope. To gain a better understanding of the arching mechanisms in a slope with evenly spaced drilled shafts socketed into a stable stratum (or a rock layer), the three‐dimensional finite element modelling technique was used for a comprehensive parametric study, where the nonlinear and plastic nature of the soil and the elastic behavior of the drilled shafts as well as the interface frictions were modelled. Various factors were varied in the parametric study to include (1) the rigidity of the drilled shafts as influenced by its diameter, modulus of elasticity, and total length; (2) shafts spacing and location on the slope; (3) the material properties of rock and the socket length of shaft; and (4) the soil movement and strength parameters. Evidences of soil arching and reduction in the stresses and displacements through the load transfer mechanisms due to the presence of the drilled shafts were elucidated through the finite element method (FEM) simulation results. Design charts based on regression analysis of FEM simulation results were created to obtain a numerical value of the load transfer factor for the arching mechanism provided by the drilled shafts on the slope. Observations of the arching behavior learned from the FEM simulations provide an insight into the behavior of drilled shafts stabilized slope. Copyright © 2009 John Wiley & Sons, Ltd.     

Mapping of the soil texture using geostatistical method (a case study of the Shahrekord plain, central Iran)

Soil texture is a key variable that reflect a number of soil properties such as soil permeability, water holding capacity, nutrient storage and availability, and soil erosion. The main objective of this study was to produce the kriged maps of soils of the Shahrekord region, central Iran. One hundred four soil samples were collected on a 375-m² sampling grid from the depths of 0–30, 30–60, and 60–100 centimeter, and their particle sizes were determined using hydrometer method. The results showed a moderately spatial correlation in the soil particles among sampling soil layers and across the study area. Moreover, increasing clay and therewith observation of heavier soil textures is evident from surface to subsurface layers of the soils in the studied area due to rainfall and/or irrigation agriculture. These findings indicated that study of the soil texture variation with depth can be used as a clue for site-specific management and precision agriculture. Moreover, we suggest further analysis by using other data layers like topographical parameters, land use, parent material, soil erosion, and any other information which might influence the spatial distribution of soil texture.