基于最优分割分级法的月球撞击坑分级及其演化分析

撞击坑是月球表面广泛分布的重要构造形态,占据了月球表面的大部分面积。撞击坑的直径差别很大,从几微米到数百千米,其退化程度与形成年代具有密切关系。为了研究不同地质年代形成的撞击坑直径大小及其演化规律,需采用量化分级方法对大小不同的撞击坑进行定量分级和统计分析。本文在月表撞击坑数据库LU60645GT和Lunar_Impact_Crater_Database(2011)的基础上,结合数据库中撞击坑的直径、深度和年代信息,利用最优分割分级法对撞击坑直径进行定量化分级,并根据分级结果,综合分析撞击坑几何形态特征及其演化规律。研究结果表明,撞击坑形态特征的演化与年代有密切的关系。在相同级别、相同地体下,撞击坑形成的年代越早,其形态特征的精细结构退化程度越明显,只保留了大体的几何形状;而在不同级别、相同地体、相同年代下的撞击坑形态特征则由简单逐渐变为复杂,坑物质也逐渐变得复杂。     

Late-Quaternary Slip Rate and Seismic Activity of the Xianshuihe Fault Zone in Southwest China

The Xianshuihe fault zone is a seismo-genetic fault zone of left-lateral slip in Southwest China. Since 1725, a total of 59 Ms ≥ 5.0 earthquakes have occurred along this fault zone, including 18 Ms 6.0–6.9 and eight Ms ≥ 7.0 earthquakes. The seismic risk of the Xianshuihe fault zone is a large and realistic threat to the western Sichuan economic corridor. Based on previous studies, we carried out field geological survey and remote sensing interpretation in the fault zone. In addition, geophysical surveys, trenching and age-dating were conducted in the key parts to better understand the geometry, spatial distribution and activity of the fault zone. We infer to divide the fault zone into two parts: the northwest part and the southeast part, with total eight segments. Their Late Quaternary slip rates vary in a range of 11.5 mm/a –(3±1) mm/a. The seismic activities of the Xianshuihe fault zone are frequent and strong, periodical, and reoccurred. Combining the spatial and temporal distribution of the historical earthquakes, the seismic hazard of the Xianshuihe fault zone has been predicted by using the relationship between magnitude and frequency of earthquakes caused by different fault segments. The prediction results show that the segment between Daofu and Qianning has a possibility of Ms ≥ 7.0 earthquakes, while the segment between Shimian and Luding is likely to have earthquakes of about Ms 7.0. It is suggested to establish a GPS or In SAR-based real-time monitoring network of surface displacement to cover the Xianshuihe fault zone, and an early warning system of earthquakes and post seismic geohazards to cover the major residential areas.     

Characteristics and Origin of Tight Oil Accumulations in the Upper Triassic Yanchang Formation of the Ordos Basin, North-Central China

The Upper Triassic oil accumulations in the Ordos Basin is the most successful tight oil play in China,with average porosity values of less than 10% and permeability values below 1.0 mD.This study investigated the geological characteristics and origin of the tight oil accumulations in the Chang 6 member of the Upper Triassic Yanchang Formation in the Shanbei area based on over 50,000 petrological,source-rock analysis,well logging and production data.The tight oil accumulation of the Chang 6 member is distributed continuously in the basin slope and the centre of the basin.The oilwater relationships are complex.Laumontite dissolution pores are the most important storage spaces,constituting 30%-60% of total porosity and showing a strong positive relationship with oil production.The pore-throat diameter is less than 1 μm,and the calculated critical height of the oil column is much larger than the tight sand thickness,suggesting that the buoyancy was probably of limited importance for oil migration.The pressure difference between the source rocks and sandstone reservoirs is inferred to have provided driving force for hydrocarbon migration.Two factors of source-reservoir configuration and laumontite dissolution contributed to the formation of the Chang 6 tight oil accumulations.Intense hydrocarbon generation and continuous sand bodies close to the hydrocarbon kitchen are the foundation for the large-scale oil distribution.Dissolution of feldspar-laumontite during the process of organic matter evolution generated abundant secondary pores and improved the reservoir quality.     

Status of Stratigraphy Research in China

Scientific research and productive practice for earth history are inseparable from the accurate stratigraphic framework and time framework. Establishing the globally unified, precise and reliable chronostratigraphic series and geological time series is the major goal of the International Commission on Stratigraphy(ICS). Under the leadership of the ICS, the countries around the world have carried out research on the Global Standard Stratotype-section and Points(GSSPs) for the boundaries of chronostratigraphic systems. In the current International Chronostratigraphic Chart(ICC), 65 GSSPs have been erected in the Phanerozoic Eonothem, and one has yet been erected in the Precambrian Eonothem. Based on the progress of research on stratigraphy especially that from its subcommissions, the ICS is constantly revising the ICC, and will publish a new International Stratigraphic Guide in 2020. After continual efforts and broad international cooperation of Chinese stratigraphers, 10 GSSPs within the Phanerozoic Eonothem have been approved and ratified to erect in China by the ICS and IUGS. To establish the standards for stratigraphic division and correlation of China, with the support from the Ministry of Science and Technology, the National Natural Science Foundation of China and the China Geological Survey, Chinese stratigraphers have carried out research on the establishment of Stages in China. A total of 102 stages have been defined in the "Regional Chronostratigraphic Chart of China(geologic time)", in which 59 stages were studied in depth. In 2014, the "Stratigraphic Chart of China" was compiled, with the essential contents as follows: the correlation between international chronostratigraphy and regional chronostratigraphy of China(geologic time), the distributive status of lithostratigraphy, the characteristics of geological ages, the biostratigraphic sequence, the magnetostratigraphy, the geological events and eustatic sea-level change during every geological stage. The "Stratigraphical Guide of China and its Explanation(2014)" was also published. Chinese stratigraphers have paid much attention to stratigraphic research in south China, northeast China, north China and northwest China and they have made great achievements in special research on stratigraphy, based on the 1:1000000, 1:250000, 1:200000 and 1:50000 regional geological survey projects. Manifold new stratigraphic units were discovered and established by the regional geological surveys, which are helpful to improve the regional chronostratigraphic series of China. On the strength of the investigation in coastal and offshore areas, the status of marine strata in China has been expounded. According to the developing situation of international stratigraphy and the characteristics of Chinese stratigraphic work, the contrast relation between regional stratigraphic units of China and GSSPs will be established in the future, which will improve the application value of GSSPs and the standard of regional stratigraphic division and correlation. In addition, the study of stratigraphy of the Precambrian, terrestrial basins and orogenic belts will be strengthened, the Stratigraphic Chart of China will be improved, the typical stratigraphic sections in China will be protected and the applied study of stratigraphy in the fields of oil and gas, solid minerals, etc. will be promoted. On the ground of these actions, stratigraphic research will continue to play a great role in the social and economic development of China.     

云南会泽铅锌矿床分散元素的富集机制——兼论浅色闪锌矿富集Cd的原因

文章对云南会泽铅锌矿床的黄铁矿、方铅矿和闪锌矿中的分散元素进行了电子探针分析(EMPA),探讨了分散元素的富集机制.结果表明,分散元素含量已达到综合利用指标,且富集规律为:分散元素以类质同象的形式赋存,黄铁矿中分散元素含量较低,而方铅矿中分散元素的含量稍高于闪锌矿.闪锌矿中:Cd富集顺序为红色＞杂色＞黑色,在高温阶段Cd置换Fe,低温阶段Cd置换Zn;Ga通过置换Zn进入闪锌矿,Ge可能主要替代Fe而进入闪锌矿晶格.方铅矿中:Cd和Ga元素置换Fe或Pb先进入方铅矿晶格内,Ge则富集较晚,具体表现为:当Ga含量较低时,元素进入方铅矿品格顺序为Fe,Zn→Cd→Ga,Ge,当Ga含量较高时,元素进入方铅矿品格的顺序依次为Cd,Ga→Ge.     

刚果(金)地质特征与主要矿产资源概况

刚果(金)主要由刚果盆地和环盆地高原组成,盆地主要由中生代到新生代地层及近现代沉积物组成,沿着盆地内边缘分布有泛非时期的火山沉积物,环盆地高原主要为抬升的前寒武纪基底。刚果(金)优势金属矿产资源主要分布环盆地高原的加丹加新元古代铜-钴多金属成矿带、KIB-KAB中元古代锡-铌-钽-钨多金属成矿带、刚果东北太古代绿岩带型金-铁多金属成矿带上,而金刚石则主要分布开赛及东北部地区中新生代金刚石成矿区内。     

连续弯道水流模拟中二次流修正效果评价

为了选择适用于复杂连续弯道的二次流修正方法,选取了线性方法中两种典型的计算模式,通过在正交曲线坐标系二维浅水动量方程中增加扩散应力项开发了考虑二次流影响的平面二维水流模型。基于不同复杂度的4个连续弯道试验的水位和流速分布资料,通过理论分析和数值试验对比定量评估了传统二维模型和两种二次流修正方法在连续弯道水流模拟中的效果。测试结果表明,Delft3D模型的二次流修正方法自由度较高,适用于不同复杂度的连续弯道水流模拟,而Lien模型二次流修正方法适用于微弯或中弯,应用于中弯时需要慎重选用,不适用于急弯连续弯道模拟。两种方法比较,建议连续弯道水流模拟中优选Delft3D模型的二次流修正方法。     

植被作用下土壤抗剪强度和径流侵蚀力的耦合效应

利用野外径流小区动态监测和人工模拟降雨试验,阐明了草被和灌木的减流减沙效应,从力学层面揭示了坡面侵蚀产沙的过程机理。结果表明,与裸地相比,野外坡面草地和灌木地径流量分别减少28.1%~56.5%和85.7%~100%、产沙量分别减少84.9%~90.7%和98.5%~100%;在人工模拟降雨强度下,草地和灌木地径流量分别减少51.9%~90.9%和61.7%~80.6%、产沙量分别减少93.6%~99.2%和95.5%~99.2%;植被具有明显的增强土壤抗剪强度的作用,不同植被坡面抗剪强度与剪切面上的法向压力成正比,且符合库仑定律;不同下垫面条件下土壤黏聚力与坡面径流量和侵蚀产沙量呈显著的负相关关系,随着黏聚力的增大,径流量和侵蚀产沙量呈下降趋势;草地和灌木地坡面侵蚀临界径流切应力分别为裸地的2.64~3.16倍和2.44~3.18倍,建立了不同被覆坡面临界径流切应力与土壤抗剪强度和黏聚力的关系。研究结果对定量评价植被减蚀作用和深化土壤侵蚀力学过程有一定的参考意义。     

利用被动示踪物模拟对黑潮入侵南海的数值研究

由于缺少观测数据和对黑潮水准确定义,很难识别出从太平洋入侵到南海的黑潮水团。本文基于一个经过观测验证的三维模式MITgcm,利用被动示踪物标记黑潮水,研究了入侵南海的黑潮水的时空变化。研究表明,在冬季,黑潮水入侵的范围最广,几乎占据了18°N-23°N和114°E-121°E的区域;并有一个分支进入台湾海峡;黑潮入侵的范围随深度增加逐渐减小。在夏季,黑潮水被限制在118°E以东,且没有分支进入台湾海峡;入侵的范围从海面到约205米是增大的,之后随深度增加逐渐减小。通过分析从2003年到2012年黑潮入侵的年际变化,与厄尔尼诺年和正常年相比,冬季黑潮入侵后向台湾海峡的分支在拉尼娜年是最弱的,这可能与中国大陆东南方向的风应力旋度有关。通过吕宋海峡的黑潮入侵通量（KIT）是西向的,其年平均值约为-3.86×10⁶ m³/s,大于吕宋海峡通量（LST,约-3.15×10⁶ m³/s）。250米以上的KIT约占了全深度通量的60-80%。此外,从2003年到2012年KIT与Niño 3.4指数的相关系数到达0.41,小于LST与Niño 3.4指数的相关系数0.78。     

海洋生态重要性区域的内涵与识别方法研究——以黄河口为例

海洋生态环境目前正在承受来自人类活动和气候变化的巨大压力;急需必要的管理工具或决策支持系统来应对这些压力所带来的生态环境问题。对海洋生境的分类识别是开展生物多样性保护的基础和前提;海洋生态重要区识别作为一种客观、科学和灵活的生境分类评估和选划方法;已被科学界和管理者广泛接受和认可。本文首先介绍了海洋生态重要区的概念内涵以及识别方法的研究进展;给出了海洋生态重要区的定义;之后以黄河口为例;初步建立了针对该区域的生态重要区识别标准和评价方法;对黄河口及邻近海区进行了生态重要性等级划分。本文是对生态重要区识别方法在我国近海的首次应用尝试;研究结果可为我国基于生态系统的海洋管理提供科学方法和工具;也可为其他区域的研究提供借鉴。