凤太矿田层控铅锌(铜)矿床的成矿物质来源探讨

秦岭凤太矿田层控铅锌(铜)矿床的金属物质、硫和成矿溶液主要来自深部基底的岩石,属海底喷流—沉积成因矿床。从这一理论认识出发可进一步分析控矿地质条件及今后在该区有效地寻找同类矿床。     

断层相关褶皱理论在准噶尔盆地南缘山前带构造研究的应用

利用断层相关褶皱的构造几何分析方法，对准噶尔盆地南缘山前复杂构造带内基于地震剖面进行了构造解析，搭建了中、东段的构造轮廓和构造组合样式，认为东段阜康断裂带主要表现为至地表的推覆逆掩。由于位移量大部分转移至地表，阜康断裂带的前陆部分无喜山期构造带；西段造山带内的挤压往前陆方向传递过程中以前列式不断释放其位移量，造成在纵向上呈现三排主要的断层相关褶皱带。根据正演平衡地质剖面制作技术对山前复杂构造区地震剖面反射波的构造识别进行了模拟与探讨。     

The global joule heat production rate and the AE index

The accuracy of the AE index as a measure of the joule heat production rate is examined for a typical substorm event on 18 March 1978 by estimating the global joule heat production rate, as a function of time, using data obtained from the IMS six meridian chains. In spite of the fact that the AE index had had an initial slow growth which was followed by a rapid growth, the joule heat production rate attained a high level during the slow growth and thus their variations were considerably different from those of the AE index. Therefore, although the AE index is statistically linearly related to the global joule heat production rate, one should be cautious in assuming that details of time variations of the AE index during individual events represent those of the joule heat production rate.     

介绍一个新建立的岩石地层单位——陈刘组

陈刘组为新建立的岩石地层单位，代表广西早三叠世盆地滨岸相带沉积类型。层型剖面位于贵港市陈刘村附近。层型定义指位于龙潭组与板纳组之间的沉积序列，岩性为灰绿、紫红色泥岩、粉砂细砂岩夹少量火山岩及碳酸盐岩，含菊石、双壳类、牙形石等化石，厚３５９ｍ。     

激变食变星PG0027+260的CCD光变曲线

我们于1989年11月30日晚对PG0027+260进行了时间分辨率为108秒的高速CCD测光,得到了一条完整的光变曲线,从而确认其为激变食变星系统,轨道周期0.146~d     

数字宜昌建设初探

数字地球、数字城市是近几年刚提出来的一个全新的概念 ,但数字城市的建设却以空前的速度向前发展着 ,国务院总理朱熔基在视察宜昌时提出要把宜昌建设成世界级的城市 ,未来的城市数字化程度将是衡量一个城市发达程度的重要指标 ,启动数字宜昌建设是跻身世界级城市 ,提高宜昌市综合竞争力的重要举措     

水下滑翔器主体外形优化设计

对水下滑翔器主体外形的优化设计问题进行研究.首先,在考虑内部机械结构限制的条件下,建立了主体外形优化数学模型,并采用CFX计算了若干主体形状的绕流阻力.在此基础上建立了映射主体外形的尺寸参数与绕流阻力的BP神经网络.然后将建立的神经网络作为优化设计问题的目标函数,采用坐标轮换法对滑翔器主体外形进行了优化设计,确定了尺寸参数的最优解.     

未来的国际天球参考架

本文简述了国际天球参考架的发展历史和现在射电参考架的现状—基准源选择的标准和参考架的稳定性。描述了地面上光学观测在依巴谷参考架的维持和加密的一系列工作。介绍由天体测量卫星GAIA和SIM给出的天球参考架可能逵到的精度。详述了在今后十年中地面天体测量的作用以及正在开展有关天球参考架的研究课题 ,同时也列出了我国正在和即将开展天体测量的几个研究课题     

Himalayan magmatism and porphyry copper–molybdenum mineralization in the Yulong ore belt, East Tibet

Summary ?The NW–SE-trending Yulong porphyry Cu–Mo ore belt, situated in the Sanjiang0 area of eastern Tibet, is approximately 400 km long and 35 to 70 km wide. Complex tectonic and magmatic processes during the Himalayan epoch have given rise to favorable conditions for porphyry-type Cu–Mo mineralization. Porphyry masses of the Himalayan epoch in the Yulong ore belt are distributed in groups along regional NW–SE striking tectonic lineaments. They were emplaced mainly into Triassic and Lower Permian sedimentary-volcanic rocks. K–Ar und U–Pb isotopic datings give an intrusion age range of 57–26 Ma. The porphyries are mainly of biotite monzogranitic and biotite syenogranitic compositions. Geological and geochemical data indicate that the various porphyritic intrusions in the belt had a common or similar magma source, are metaluminous to peraluminous, Nb–Y–Ba-depleted, I-type granitoids, and belong to the high-K calc-alkaline series. Within the Yulong subvolcanic belt a number of porphyry stocks bear typical porphyry type Cu–Mo alteration and mineralization. The most prominent porphyry Co–Mo deposits include Yulong, Malasongduo, Duoxiasongduo, Mangzong and Zhanaga, of which Yulong is one of the largest porphyry Cu (Mo) deposits in China with approximately 8 × 10⁶ tons of contained Cu metal. Hydrothermal alteration at Yulong developed around a biotite–monzogranitic porphyry stock that was emplaced within Upper Triassic limestone, siltstone and mudstone. The earliest alteration was due to the effects of contact metamorphism of the country rocks and alkali metasomatism (potassic alteration) within and around the porphyry body. The alteration of this stage was accompanied by a small amount of disseminated and veinlet Cu–Mo sulfide mineralization. Later alteration–mineralization zones form more or less concentric shells around the potassic zone, around which are distributed a phyllic or quartz–sericite–pyrite zone, a silicification and argillic zone, and a propylitic zone. Fluid inclusion data indicate that three types of fluids were involved in the alteration–mineralization processes: (1) early high temperature (660–420 °C) and high salinity (30–51 wt% NaCl equiv) fluids responsible for the potassic alteration and the earliest disseminated and/or veinlet Cu–Mo sulfide mineralization; (2) intermediate unmixed fluids corresponding to phyllic alteration and most Cu–Mo sulfide mineralization, with salinities of 30–50 wt% NaCl equiv and homogenization temperatures of 460–280 °C; and (3) late low to moderate temperature (300–160 °C) and low salinity (6–13 wt% NaCl equiv) fluids responsible for argillic and propylitic alteration. Hydrogen and oxygen isotopic studies show that the early hydrothermal fluids are of magmatic origin and were succeeded by increasing amounts of meteoric-derived convective waters. Sulfur isotopes also indicate a magmatic source for the sulfur in the early sulfide mineralization, with the increasing addition of sedimentary sulfur outward from the porphyry stock. Received August 29, 2001; revised version accepted May 1, 2002 Published online: November 29, 2002