Karst spring responses examined by process-based modeling

Ground water in karst terrains is highly vulnerable to contamination due to the rapid transport of contaminants through the highly conductive conduit system. For contamination risk assessment purposes, information about hydraulic and geometric characteristics of the conduits and their hydraulic interaction with the fissured porous rock is an important prerequisite. The relationship between aquifer characteristics and short-term responses to recharge events of both spring discharge and physicochemical parameters of the discharged water was examined using a process-based flow and transport model. In the respective software, a pipe-network model, representing fast conduit flow, is coupled to MODFLOW, which simulates flow in the fissured porous rock. This hybrid flow model was extended to include modules simulating heat and reactive solute transport in conduits. The application of this modeling tool demonstrates that variations of physicochemical parameters, such as solute concentration and water temperature, depend to a large extent on the intensity and duration of recharge events and provide information about the structure and geometry of the conduit system as well as about the interaction between conduits and fissured porous rock. Moreover, the responses of solute concentration and temperature of spring discharge appear to reflect different processes, thus complementing each other in the aquifer characterization.     

Common-Reflection-Surface Stack for Converted Waves

The finite-offset (FO) common-reflection-surface (CRS) stack has been shown to be able to handle not only P-P or S-S but also arbitrarily converted reflections. It can provide different stack sections such as common-offset (CO), common-midpoint (CMP) and common-shot (CS) sections with significantly increased signal-to-noise ratio from the multi-coverage pre-stack seismic data in a data-driven way. It is our purpose in this paper to demonstrate the performance of the FO CRS stack on data involving converted waves in inhomogeneous layered media. In order to do this we apply the FO CRS stack for common-offset to a synthetic seismic data set involving P-P as well as P-S converted primary reflections. We show that the FO CRS stack yields convincing improvement of the image quality in the presence of noisy data and successfully extracts kinematic wavefield attributes useful for further analyses. The extracted emergence angle information is used to achieve a complete separation of the wavefield into its P-P and P-S wave components, given the FO CRS stacked horizontal and vertical component sections.     

Assessing quality of volunteer crowdsourcing contributions: lessons from the Cropland Capture game

Volunteered geographic information (VGI) is the assembly of spatial information based on public input. While VGI has proliferated in recent years, assessing the quality of volunteer-contributed data has proven challenging, leading some to question the efficiency of such programs. In this paper, we compare several quality metrics for individual volunteers’ contributions. The data were the product of the ‘Cropland Capture’ game, in which several thousand volunteers assessed 165,000 images for the presence of cropland over the course of 6 months. We compared agreement between volunteer ratings and an image's majority classification with volunteer self-agreement on repeated images and expert evaluations. We also examined the impact of experience and learning on performance. Volunteer self-agreement was nearly always higher than agreement with majority classifications, and much greater than agreement with expert validations although these metrics were all positively correlated. Volunteer quality showed a broad trend toward improvement with experience, but the highest accuracies were achieved by a handful of moderately active contributors, not the most active volunteers. Our results emphasize the importance of a universal set of expert-validated tasks as a gold standard for evaluating VGI quality.     

Pleistocene mass-flow deposits of basaltic hyaloclastite on a shallow submarine shelf,South Iceland

A Pleistocene subaqueous, volcanic sequence in South Iceland consists of flows of basaltic hyaloclastite and lava with interbedded sedimentary diamictite units. Emplacement occurred on a distal submarine shelf in drowned valleys along the southern coast of Iceland. The higher sea level was caused by eustatic sea-level change, probably towards the end of a glaciation. This sequence, nearly 700 m thick, rests unconformably on eroded flatlying lavas and sedimentary rocks of likely Tertiary age. A Standard Depositional Unit, describing the flows of hyaloclastite, starts with compact columnar-jointed basalt overlain by cubejointed basalt, and/or pillow lava. This in turn is overlain by thick unstructured hyaloclastite containing aligned basalt lobes, and bedded hyaloclastite at the top. A similar lithofacies succession is valid for proximal to distal locations. The flows were produced by repeated voluminous extrusions of basaltic lava from subaquatic fissures on the Eastern Rift Zone of Iceland. The fissures are assumed to lie in the same general area as the 1783 Laki fissure which produced 12 km³ of basaltic lava. Due to very high extrusion rates, the effective water/melt ratio was low, preventing optimal fragmentation of the melt. The result was a heterogeneous mass of hyaloclastite and fluid melt which moved en masse downslope with the melt at the bottom of the flow and increasingly vesicular hyaloclastite fragments above. The upper and distal parts of the flow moved as low-concentration turbulent suspensions that deposited bedded hyaloclastite.     

Re-assessment of the paleoclimate implications of the Shell Bar in the Qaidam Basin,China

The Shell Bar in the Qaidam Basin, China, is a prominent geological feature composed of millions of densely packed Corbicula shells. Since the mid 1980s, it has been regarded as evidence for existence of a large lake during Marine Isotope Stage (MIS) 3 in the presently hyper-arid Qaidam Basin. Early studies suggested the bivalve shells accumulated at the shore of a large lake, whereas more recent work led to the conclusion that the Shell Bar was formed within a deeper water body. Based on our re-assessment of sediments and fossils from the Shell Bar, investigation of exposed fluvio-lacustrine sections upstream of the Shell Bar and study of nearby modern streams, we infer that the Shell Bar represents a stream deposit. Corbicula is a typical stream-dweller around the world. Preservation of Corbicula shells of different sizes, as well as occurrence of many articulated shells, provide evidence against post-mortem transport and accumulation along a lake shore. Additionally, the SE-NW alignment of the Shell Bar is similar to modern intermittent stream beds in its vicinity and corresponds to the present-day slope towards the basin centre further NW, and furthermore, the predominantly sandy sediments also indicate that the Shell Bar was formed in a stream. Abundant ostracod shells in the Shell Bar sediments originated from stream-dwelling species that are abundant in modern streams in the vicinity of the Shell Bar, or in part from fluvio-lacustrine sediments exposed upstream of the Shell Bar, as a result of erosion and re-deposition. Deflation of alluvial fine-grained sediments in the Shell Bar region and protection of the stream deposits by the large and thick-walled Corbicula shells reversed the former channel relief and yielded the modern exposure, which is a prominent morphological feature. Occurrence of Corbicula shells in the Qaidam Basin indicates climate was apparently warmer than present during the formation of the Shell Bar because Corbicula does not live at similar or higher altitudes in the region today. Because the Shell Bar is no longer considered a deposit formed within a lake, its presence does not indicate paleoclimate conditions wetter than today.     

Modest diatom responses to regional warming on the southeast Tibetan Plateau during the last two centuries

A general mean annual temperature increase accompanied with substantial glacial retreat has been noted on the Tibetan Plateau during the last two centuries but most significantly since the mid 1950s. These climate trends are particularly apparent on the southeastern Tibetan Plateau. However, the Tibetan Plateau (due to its heterogeneous mountain landscape) has very complex and spatially differing temperature and precipitations patterns. As a result, intensive palaeolimnological investigations are necessary to decipher these climatic patterns and to understand ecological responses to recent environmental change. Here we present palaeolimnological results from a ²¹⁰Pb/¹³⁷Cs-dated sediment core spanning approximately the last 200 years from a remote high-mountain lake (LC6 Lake, working name) on the southeastern Tibetan Plateau. Sediment profiles of diatoms, organic variables (TOC, C:N) and grain size were investigated. The ²¹⁰Pb record suggests a period of rapid sedimentation, which might be linked to major tectonic events in the region ca. 1950. Furthermore, unusually high ²¹⁰Pb supply rates over the last 50 years suggest that the lake has possibly been subjected to increasing precipitation rates, sediment focussing and/or increased spring thaw. The majority of diatom taxa encountered in the core are typical of slightly acidic to circumneutral, oligotrophic, electrolyte-poor lakes. Diatom species assemblages were rich, and dominated by Cyclotella sp., Achnanthes sp., Aulacoseira sp. and fragilarioid taxa. Diatom compositional change was minimal over the 200-year period (DCCA = 0.85 SD, p = 0.59); only a slightly more diverse but unstable diatom assemblage was recorded during the past 50 years. The results indicate that large-scale environmental changes recorded in the twentieth century (i.e. increased precipitation and temperatures) are likely having an affect on the LC6 Lake, but so far these impacts are more apparent on the lake geochemistry than on the diatom flora. Local and/or regional peculiarities, such as increasing precipitation and cloud cover, or localized climatic phenomena, such as negative climate feedbacks, might have offset the effects of increasing mean surface temperatures.     

Bias of ostracod stable isotope data caused by drying of sieve residues from water

Stable isotope analysis of ostracod shells is used routinely for palaeoenvironmental studies of ostracod-bearing records. Sample treatment usually involves the disaggregation of sediments and sieving; before the sieving residues were washed with water onto petri dishes and oven-dried. In our study, we compared δ¹⁸O and δ¹³C values of shells that were oven-dried from water and from ethanol alternatively. Large isotopic differences of up to 3‰ were determined for δ¹⁸O values, whereas differences in δ¹³C values were less pronounced with differences of up to 1.6‰. Stable isotope values of shells dried from water were lower for both oxygen and carbon as a result of calcite crystals precipitated on the shell surfaces during the drying process. Therefore, ostracod shells for stable isotope analysis should not be prepared by drying from water. Instead, shells should be dried from ethanol to obtain reliable stable isotope data; likewise freeze-drying is expected to provide trustworthy results.