Model analysis of radar echo split observed in an artificial cloud seeding experiment

An artificial cloud seeding experiment was performed over the Japan Sea in winter to show how massive seeding could be effective to mitigate heavy snowfall damage. The results showed that 20 min after cloud seeding, a portion of the radar echo beneath the seeding track was weakened to divide the radar echo into two parts. In order to analyze the results, a numerical simulation was conducted by using the Weather Research and Forecasting model verion 3.5.1. In this simulation, the seeding effects were represented as phenomena capable of changing rain particles by accreting cloud ice and snow to form graupel particles and by changing cloud liquid water to snow particles. The graupel particles fell rapidly, thus temporarily intensifying the rainfall, which subsequently decreased. Therefore, the weakened radar echo in the field experiment is deemed to have been caused by the increase in rapidly falling graupel particles.     

Can the visualization of rip currents prevent drowning accidents? Consideration of the effect of optimism bias

Drowning accidents at beach in Japan are caused by rip currents. To reduce these accidents, a new technology that can detect rip currents and notify beachgoers by using the Internet of Things (IoT) and Artificial Intelligence (AI) was proposed. However, studies on the effect of visualizing rip currents or considering the effect of optimism bias have not been conducted. This study investigates if visualization of rip currents might help in preventing drowning accidents, while considering the effect of optimism bias. The participants were 90 Japanese beachgoers. They were asked to answer questions based on their knowledge of the beach and rip currents, their optimism bias regarding rip currents, and awareness with or without visualization. The results of the analyses suggest that despite optimism bias, the visualization of rip currents increases the tendency of beachgoers to perceive and avoid rip currents. As described above, it was found that by visualizing the rip current, beachgoers were able to perceive and avoid rip currents. In addition, an understanding of rip currents is positively related to the intent to avoid rip currents even when rip currents are visualized. Therefore, it is necessary not only to enhance the avoidance tendency by visualizing rip currents, but also to further enhance knowledge of beachgoers to deepen the understanding of rip currents including the danger associated and methods to avoid them.

     

Episodic exhumation of accretionary complexes: Fission-track thermochronologic evidence from the Shimanto Belt and its vicinities, southwest Japan

Abstract Apatite and zircon fission-track (FT) analyses of the Shimanto accretionary complex and its vicinities, southwest Japan, unraveled the episodic material migration of the deep interiors of the accretionary complex. Apatite data with 100°C closure temperature (T_e) generally indicate ~10 Ma cooling throughout the Shimanto complex. In contrast, zircon data with 260°C T_e exhibit a wide range of apparent ages as a consequence of paleotemperature increase to the zircon partial annealing zone. In the Muroto and Kyushu regions, maximum temperatures tend to have been higher in the northern, older part of the complex, with indistinguishable temperature differences between coherent and melange units adjacent to each other. It thus suggests, along with vitrinite reflectance data, that older accretionary units occurring to the north sustain greater maximum burial during the accretion-burial-exhumation process. Zircon data suggest two cooling episodes: ~70 Ma cooling at widespread localities in the Cretaceous Shimanto Belt and Sambagawa Belt, and ~15 Ma cooling in the central Kii Peninsula. The former is consistent with ⁴⁰Ar/³⁹Ar cooling ages from the Sambagawa Belt, whereas the latter slightly predates the widespread 10 Ma apatite cooling ages. These data imply that the extensive material migration and exhumation took place in and around the Shimanto complex in Late Cretaceous as well as in Middle Miocene. Considering tectonic factors to control evolution of accretionary complexes, the episodic migration is best explained by accelerated accretion of sediments due to increased sediment influx at the ancient Shimanto trench, probably derived from massive volcano-plutonic complexes contemporaneously placed inland. Available geo- and thermochronologic data suggest that extensive magmatism triggered regional exhumation twice in the past 100 Ma, shedding new light on the cordilleran orogeny and paired metamorphism concepts.     

K-Ar Ages of Tin-Polymetallic Mineralization in the Oruro Mining District, Central Bolivian Tin Belt

Abstract. K-Ar age determinations were carried out on vein- and rock-forming minerals from five vein-type tin-polymetallic ore deposits of the Oruro mining district in the central part of the Bolivian tin belt. The sericite from vein selvedges and an altered host rock provides good estimates of the ages of hypogene mineralization, and supergene alunite and jarosite provide ages for erosional and weathering episodes. It is concluded that hypogene mineralization in the Oruro mining district took place during the early to middle Miocene: 15.8±0.8 Ma at San José, 20.1±l.l Ma at Morococala, 20.5±1.0 Ma at Avicaya, and 19.6±1.0 Ma at Llallagua. Fine grained supergene alunite (δ³⁴S = -10.1 960) and jarosite yield K-Ar ages of 6.7±0.7 Ma at Avicaya and 3.9±0.7 Ma at Bolivar, respectively, suggesting that erosion and chemical weathering were active at those times.     

Three‐dimensional microstructure of samples recovered from asteroid 25143 Itokawa: Comparison with LL5 and LL6 chondrite particles

In this study, the three‐dimensional (3‐D) microstructure of 48 Itokawa regolith particles was examined by synchrotron microtomography at SPring‐8 during the preliminary examination of Hayabusa samples. Moreover, the 3‐D microstructure of particles collected from two LL6 chondrites (Ensisheim and Kilabo meteorites) and an LL5 chondrite (Tuxtuac meteorite) was investigated by the same method for comparison. The modal abundances of minerals, especially olivine, bulk density, porosity, and grain size are similar in all samples, including voids and cracks. These results show that the Itokawa particles, which are surface materials from the S‐type asteroid Itokawa, are consistent with the LL chondrite materials in terms of not only elemental and isotopic composition of the minerals but also 3‐D microstructure. However, we could not determine whether the Itokawa particles are purely LL5, LL6, or a mixture of the two. No difference between the particles collected from Rooms A and B of the sample chamber, corresponding to the sampling sequence of the spacecraft's second and first touchdowns, respectively, was detected because of the statistically small amount of particles from Room B.     

Evolution and effect of the stress concentration and rock failure in the deep multi-seam coal mining

Supports crushing accident occasionally occurs in the protected seam exploitation of deep multi-seam coal mining structure and results in adverse effect to the production. To prevent its recurrence in a newly developed working field, a 3D numerical extraction model was built based on the geologic and mining conditions of Jining coal mine to evolve the changes, state and characteristics of the reconstructed vertical and lateral stress in rock interlayer after protective seam exploitation. Stress release and increase zones of this mining structure were separated. Mining-induced localized stress concentration and the interlayer rock failure behavior were explored. The action of concentrated stress on the hydraulic supports in protected seam was discussed upon the major stress redistribution. Using the infinitesimal strain method, a mechanical model was created to further explore, from the vertical and lateral directions, the cause and mechanism of localized stress concentration and rock failure behavior in rock interlayer. The field investigation was finally performed to verify the numerical and mechanical results, and the essential control measures were proposed to prevent this accident. Key findings of this study bring some new insights into the deep multi-seam coal extraction and help to promote a more reliable underground mining.     

Experimental and Numerical Investigations of Ground Deformation Using Chemical Grouting for Pipeline Foundation

Based on experimental and numerical investigations, the present paper focuses on under ground scope (UGS) chemical grouting method that can actually improve the pipeline surrounding foundation to solve pipeline saggy damage. According to the experimental results, a solution-type injection material could make lager soil deformation, using less total slurry amount than suspension-type injection material. Therefore, a suspension-type injection material with shorter gel time is more suitable for the UGS method, making it more effective to reinforce the pipeline foundation and restore pipelines. The results of some patterns of injection tests revealed relationship between the behavior of the grouting material and the deformation of the soil. It is found that the material can be injected into a foundation by fracture grouting if the permeation coefficient is lower than 1.00 × 10⁻³ mm/s. The situation was analyzed by using 2-D finite element method analysis software Phase2, and the analysis result proposes that the real data and simulation data are nearly the same in impermeable soil. Furthermore, even if the construction object is permeable soil, it can also be become impermeable soil by two phases grouting: soil improvement grouting and restoration grouting.