Mineral inclusions in zircons of para- and orthogneiss from pre-pilot drillhole CCSD-PP1, Chinese Continental Scientific Drilling Project

The pre-pilot drillhole CCSD-PP1, Chinese Continental Scientific Drilling Project (CCSD), with depth of 432 m, is located in the Donghai area in the southwestern Sulu terrane. The core samples are mainly comprised of paragneiss, orthogneiss and ultramafic rock with minor intercalated layers of eclogite and phengite-bearing kyanite quartzite. All analyzed paragneiss and orthogneiss samples were overprinted on amphibolite facies retrograde metamorphism. Coesite and coesite-bearing ultrahigh-pressure (UHP) mineral assemblages were identified by Raman spectroscopy and electron microprobe analysis as inclusions in zircons separated from paragneiss, eclogite and phengite-bearing kyanite quartzite samples. In the paragneiss samples, UHP mineral inclusion assemblages mainly consist of Coe+Omp+Grt+Phe, Coe+Jd+Phe+Ap preserved in the mantles (M) and rims (R) of zircons. These UHP mineral inclusion assemblages yield temperatures of 814–852 °C and pressures of ≥28 kbar, presenting the P–T condition of UHP peak metamorphism of these country rocks. According to the mineral inclusions and cathodoluminescence images of zircons, the orthogneisses can be divided into two types: UHP (OG1) and non-UHP (OG2). In OG1 orthogneisses, low-pressure mineral inclusion assemblage, mainly consisting of Qtz+Phe+Ab+Ksp+Ap, were identified in zircon cores (C), while coesite or coesite-bearing UHP mineral inclusions were identified in the mantles (M) and rims (R) of the same zircons. These features suggest that the OG1 orthogneisses, together with the paragneisses, phengite-bearing kyanite quartzite and eclogite experienced widespread UHP metamorphism in the Sulu terrane. However, in the zircons of OG2 orthogneiss samples, no UHP mineral inclusions were found. Inclusions mainly comprised Qtz+Phe+Ap and were identified in cores (C), mantles (M) and rims (R) of OG2 zircons; the cathdoluminescence images of all analyzed zircons showed clear zonings from cores to rims. These features indicate that the OG2 orthogneisses in pre-pilot drillhole CCSD-PP1 did not experience UHP metamorphism. Therefore, we should not rule out the possibility that some orthogneisses in Sulu terrane might represent relatively low-pressure granitic intrusives emplaced after the UHP event.     

The youngest blueschist belt in SW Japan: implication for the exhumation of the Cretaceous Sanbagawa high-P/T metamorphic belt

The tectonic evolution of the Northern Shimanto belt, central Shikoku, Japan, was examined based on petrological and geochronological studies in the Oboke area, where mafic schists of the Kawaguchi Formation contain sodic amphibole (magnesioriebeckite). The peak P–T conditions of metamorphism are estimated as 4–4.5 kbar (15–17 km depth), and 240–270 °C based on available phase equilibria and sodic amphibole compositions. These metamorphic conditions are transitional between blueschist, greenschist and pumpellyite–actinolite facies. Phengite K–Ar ages of 64.8 ± 1.4 and 64.4 ± 1.4 Ma were determined for the mafic schists, and 65.0 ± 1.4, 61.4 ± 1.3 and 63.6 ± 1.4 Ma for the pelitic schists. The metamorphic temperatures in the Oboke area are below the closure temperature of the K–Ar phengite system, so the K–Ar ages date the metamorphic peak in the Northern Shimanto belt. In the broad sense of the definition of blueschist facies, the highest‐grade part of the Northern Shimanto belt belongs to the blueschist facies. Our study and those of others identify the following constraints on the possible mechanism that led to the exhumation of the overlying Sanbagawa belt: (i) the Sanbagawa belt is a thin tectonic slice with a structural thickness of 3–4 km; (ii) within the belt, metamorphic conditions varied from 5 to 25 kbar, and 300 to 800 °C, with the grade of metamorphism decreasing symmetrically upward and downward from a structurally intermediate position; and (iii) the Sanbagawa metamorphic rocks were exhumed from ～60 km depth and emplaced onto the Northern Shimanto metamorphic rocks at 15–17 km depth and 240–270 °C. Integration of these results with those of previous geological studies for the Sanbagawa belt suggests that the most probable exhumation mechanism is wedge extrusion.     

Magma genesis beneath Northeast Japan arc: A new perspective on subduction zone magmatism

It is being accepted that earthquakes in subducting slab are caused by dehydration reactions of hydrous minerals. In the context of this “dehydration embrittlement” hypothesis, we propose a new model to explain key features of subduction zone magmatism on the basis of hydrous phase relations in peridotite and basaltic systems determined by thermodynamic calculations and seismic structures of Northeast Japan arc revealed by latest seismic studies. The model predicts that partial melting of basaltic crust in the subducting slab is an inevitable consequence of subduction of hydrated oceanic lithosphere. Aqueous fluids released from the subducting slab also cause partial melting widely in mantle wedge from just above the subducting slab to just below overlying crust at volcanic front. Hydrous minerals in the mantle wedge are stable only in shallow (< 120 km) areas, and are absent in the layer that is dragged into deep mantle by the subducting slab. The position of volcanic front is not restricted by dehydration reactions in the subducting slab but is controlled by dynamics of mantle wedge flow, which governs the thermal structure and partial melting regime in the mantle wedge.     

Lost primordial continents

We investigate the bulk density variations of some representative compositions for the lower mantle based on the pressure–volume–temperature equation of state of the constituent mineral phases. The density variations of pyrolite, harzburgite, mid-ocean ridge basalt (MORB), tonalite–trondhjemite–granodiorite (TTG), and anorthosite are studied at a temperature of 300 K and at lower mantle pressures. The density of MORB is greater than that of pyrolite throughout the lower mantle, while the density of harzburgite is slightly lower than that of pyrolite. The density of anorthosite is comparable to that of pyrolite in the lower mantle in general, and greater in the lowermost mantle, while the density of TTG is lower than pyrolite throughout the lower mantle. The above results have important implications for the fate of primordial continents, TTG and anorthosite crust. While subducted TTG might be stagnant in the mantle transition zone, dense subducted anorthositic crust could be expected to sink to the core–mantle boundary (CMB) and thus might be a major component of the D" layer immediately above the CMB. Thus, we propose that significant bodies of continental material could be present in the mantle in the transition zone and immediately above the CMB, in addition to the continents on the Earth's surface.     

Nine requirements for the origin of Earth's life:Not at the hydrothermal vent,but in a nuclear geyser system

The origin of life on Earth remains enigmatic with diverse models and debates.Here we discuss essential requirements for the first emergence of life on our planet and propose the following nine requirements:(1)an energy source(ionizing radiation and thermal energy);(2)a supply of nutrients(P.K.REE.etc.);(3)a supply of life-constituting major elements;(4)a high concentration of reduced gases such as CH_4,HCN and NH_3;(5)dry-wet cycles to create membranes and polymerize RNA;(6)a non-toxic aqueous environment;(7)Na-poor water;(8)highly diversified environments,and(9)cyclic conditions,such as dayto-night,hot-to-cold etc.Based on these nine requirements,we evaluate previously proposed locations for the origin of Earth's life,including:(1)Darwin's "warm little pond",leading to a "prebiotic soup" for life;(2)panspermia or Neo-panspermia(succession model of panspermia);(3)transportation from/through Mars;(4)a deepsea hydrothermal system;(5)an on-land subduct ion-zone hot spring,and(6)a geyser systems driven by a natural nuclear reactor.We conclude that location(6)is the most ideal candidate for the o rigin point for Earth's life because of its efficiency in continuously supplying both the energy and the necessary materials for life,thereby maintaining the essential "cradle" for its initial development.We also emphasize that falsifiable working hypothesis provides an important tool to evaluate one of the biggest mysteries of the universe-the origin of life.     

Kurosegawa zone and its bearing on the development of the Japanese Islands

The Kurosegawa zone in southwest Japan is a 600 km long serpentinite mélange in the Chichibu terrains. It runs generally E-W but is slightly oblique to the subparallel arrangement of the Ryoke, Sanbagawa and Chichibu belts of Southwest Japan. A variety of geological units occurs in the Kurosegawa zone:

1. (1) granodiorite, gneiss and amphibolite of ca. 400 Ma,

2. (2) Siluro-Devonian formations,

3. (3) Upper Carboniferous to Jurassic formations,

4. (4) Upper Jurassic to Lower Cretaceous formations,

5. (5) serpentinite and

6. (6) low- to medium-grade metamorphic rocks of various baric types (ages, 220, 320, 360 and 420 Ma by K-Ar).

The most widespread is a high-pressure intermediate group of metamorphic rocks. Serpentinite is emplaced along the faults between and within the constituent units.Rocks of the Kurosegawa zone represent a mature orogenic belt along a continental margin or an island arc. Its original site as constrained by paleomagnetism was near the equatorial area. Here, 400 Ma old paired metamorphism and related magmatism took place. The island arc or microcontinent migrated northward to collide with the Eurasia plate during Late Jurassic, thus consuming the intervening ocean.     

Numerical modeling of thermal structure, circulation of H2O, and magmatism–metamorphism in subduction zones: Implications for evolution of arcs

Numerical models on thermal structure, convective flow of solid, generation and transportation of H₂O-rich fluid in subduction zones are consolidated to have a comprehensive view of the subduction zone processes: heat balance, circulation of H₂O magmatism–metamorphism, growth of arcs and continental margins. A large scale convection model with steady subduction of a cold old slab (130 Myr old) predicts rapid ( 100 Myr) cooling of subduction zones, resulting in cessation of magmatism. The model also predicts that the mantle temperature beneath arcs and continental margins is greatly affected by the effective temperature of the subducting slab, i.e., the age of the subducting slab. If subduction of a young hot slab, including ridge subduction, occurs every 60 to 120 Myr as is suggested for eastern Asia, the average temperature beneath arcs is increased by about 300 °C, which may explain the long-lasting magmatism in eastern Asia. Associated with subduction of young slabs and ridges, thermal structure and circulation of H₂O are greatly modified to cause a transition from (1) normal arc magmatism, (2) forearc mantle melting, to (3) slab melting to produce a significant amount (100 km³) of granitic melts, associated with both high-P/T and low-P/T type metamorphism. The last stage of (3) can result in formation of a granitic batholith belt and a paired metamorphic belts. Synthesis of the numerical models and observations suggest that episodic subduction of young slabs and ridges can explain heat source for generating a large amount of granitic magmas of batholiths, synchronous formation of batholith and regional metamorphic belts, and P–T conditions of the paired metamorphism. Even the high-P/T metamorphism requires an elevated geothermal structure in the forearc region, associated with ridge subduction. Although the emplacement of the batholiths and the regional metamorphic belts, and the mass balance in subduction zones are not well constrained at present, the episodic event associated with ridge subduction is thought to be essential for net growth of arcs and continental margins, as well as for the long-term heat balance in subduction zones.