Stable isotope dynamics of groundwater interactions with Ganges river

Groundwater depletion has been an emerging crisis in recent years, especially in highly urbanized areas as a result of unregulated exploitation, thus leaving behind an insufficient volume of usable freshwater. Presently Ganges river basin, the sixth largest prolific fluvial system and sustaining a huge population in South Asia, is witnessed to face (i) aquifer vulnerability through surface waterborne pollutant and (ii) groundwater stress due to summer drying of river as a result of indiscriminate groundwater abstraction. The present study focuses on a detailed sub-hourly to seasonally varying interaction study and flux quantification between river Ganges and groundwater in the Indian subcontinent which is one of the first documentations done on a drying perennial river system that feeds an enormous population. Contributing parameters to the total discharge of a river at its middle course on both temporal and spatial scale is estimated through three-component hydrograph separation and end-member mixing analysis using high-resolution water isotope (δ¹⁸O and δ²H) and electrical conductivity data. Results from this model report groundwater discharge in river to be the highest in pre-monsoon, that is, 30%, whereas, during post-monsoon the contribution lowers to 25%; on the contrary, during peak monsoon, the flow direction reverses thus recharging the groundwater which is also justified using annual piezometric hydrographs of both river water and groundwater. River water-groundwater interaction also shows quantitative variability depending on river morphometry. The current study also provides insight on aquifer vulnerability as a result of pollutant mixing through interaction and plausible attempts towards groundwater management. The present study is one of the first in South Asian countries that provides temporally and spatially variable detailed quantification of baseflow and estimates contributing parameters to the river for a drying mega fluvial system.     

Spatial patterns and temporal trends of precipitation in Iran

Spatial patterns of monthly, seasonal and annual precipitation over Iran and the corresponding long-term trends for the period 1951–2009 are investigated using the Global Precipitation Climatology Centre gridded dataset. Results suggest that the spatial patterns of annual, winter and spring precipitation and the associated coefficients of variation reflect the role of orography and latitudinal extent between central-southern arid and semi-arid regions and northern and western mountainous areas. It is also shown that precipitation occurrence is almost regularly distributed within the year in northern areas while it is more concentrated in a few months in southern Iran. The spatial distribution of Mann–Kendal trend test (Z statistics) for annual precipitation showed downward trend in north-western and south-eastern Iran, whereas western, central and north-eastern exhibited upward trend, though not statistically significant in most regions. Results for winter and autumn revealed upward trend in most parts of the country, with the exception of north-western and south-eastern where a downward trend is observed; in spring and summer, a downward trend seems to prevail in most of Iran. However, for all seasons the areas where the detected trend is statistically significant are limited to a few spot regions. The overall results suggest that the precipitation is decreasing in spring and summer and increasing in autumn and winter in most of Iran, i.e. less precipitation during the warm season with a consequent intensification of seasonality and dryness of the country. However, since the detected trends are often not statistically significant, any stringent conclusion cannot be done on the future tendencies.     

Application of Multi-Criteria Decision-Making in Land Evaluation of Agricultural Land Use

The present study was carried out to evaluate agricultural capability of a watershed located in Khuzestan; a province in southern Iran. It is aimed to examine the applicability of Multi Criteria Decision-Making (MCDM) methods in site selection process. Accordingly, the ecological resources of the watershed were initially identified. To specify the criteria required for agricultural land evaluation, Delphi method was applied. After selecting the criteria, they were weighted using Analytical Hierarchy Process (AHP) Method. Weighted Overlay (WO) Method was also used to overlay the map layers in the GIS environment. Afterwards, sensitivity analysis was performed using Weights Sensitivity Analysis (WSA) method to show the impressibility rate of the results against a certain changes in the inputs. The results revealed that out of 6591.2 ha of the total watershed area, 50.8 % has unsuitable potentiality while 27.32 % has a poor suitability for irrigated agriculture. It was also determined that only 6.96 % of the whole study area has a suitable potential for this purpose. Besides, the findings indicated that 23.38 % of the total watershed area is unsuitable for rain-fed farming. the results also showed that 31.78 % and 19.12 % of the entire study area has moderate and high potentials for rain-fed agriculture, respectively. In a general overview, this study could present how MCDM is effective in handling land capability studies.     

Geochemical and geochronological evidence for a Middle Permian oceanic plateau fragment in the Paleo-Tethyan suture zone of NE Iran

The mafic–ultramafic Fariman complex in northeastern Iran has been interpreted as a Paleo-Tethyan ophiolitic fragment with subduction- and plume-related characteristics as well as a basin deposit on an active continental margin. Contributing to this issue, we present geochemical, geochronological, and mineralogical data for transitional and tholeiitic basalts. Thermodynamic modeling suggests picritic parental magmas with 16–21 wt% MgO formed at plume-like mantle potential temperatures of ca. 1460–1600 °C. Rare pyroxene spinifex textures and skeletal to feather-like clinopyroxene attest to crystallization from undercooled magma and high cooling rates. Chromium numbers and TiO₂ concentrations in spinel are similar to those in intraplate basalts. ⁴⁰Ar–³⁹Ar dating of magmatic hornblende yielded a plateau age of 276?±?4 Ma (2σ). Transitional basalt with OIB-like trace element characteristics is the predominant rock-type; less frequent are tholeiitic basalts with mildly LREE depleted patterns and picrites with intermediate trace element characteristics. All samples show MORB-OIB like Pb/Ce, Th/La, and Th/Nb ratios which preclude subduction-modified mantle sources and felsic crustal material. Tholeiitic basalts and related olivine cumulate rocks show MORB-like initial ε_Nd values of +?9.4 to +?6.2 which define a mixing line with the data for the transitional basalts (ε_Nd ca. +?2.6). Initial ¹⁸⁷Os/¹⁸⁸Os ratios of 0.124–0.293 support mixed sources with a high proportion of recycled mafic crust in the transitional basalts. High concentrations of highly siderophile elements are in agreement with the high mantle potential temperatures and inferred high-melting degrees. It is argued that the Fariman complex originated by melting of a mantle plume component as represented by the OIB-like transitional basalt and entrained asthenosphere predominant in the MORB-like tholeiites. Two lines of evidence such as association of the Fariman complex with pelagic to neritic sedimentary rocks and the tectonic position at the boundary of two continental blocks defined by ophiolites and accretionary complexes of different ages suggest formation in an oceanic domain. Thus, we interpret it as a fragment of an oceanic plateau, which escaped subduction and was accreted as exotic block in the Paleo-Tethyan suture zone.     

Investigation of RS and GIS techniques on MPSIAC model to estimate soil erosion

Soil erosion due to surface water is a standout among the serious threat land degradation problem and an hazard environmental destruction. The first stage for every kind of soil conservation planning is recognition of soil erosion status. In this research, the usability of two new techniques remote sensing and geographical information system was assessed to estimate the average annual specific sediments production and the intensity erosion map at two sub-basins of DEZ watershed, southwest of Lorestan Province, Iran, namely Absorkh and Keshvar sub-basins with 19,920 ha, using Modified Pacific Southwest Inter-Agency Committee (MPSIAC) soil erosion model. At the stage of imagery data processing of IRS-P6 satellite, the result showed that an overall accuracy and kappa coefficient were 90.3% and 0.901, respectively, which were considered acceptable or good for imagery data. According to our investigation, the study area can be categorized into three level of severity of erosion: moderate, high, and very high erosion zones. The amount of specific sediments and soil erosion predicted by MPSIAC model was 1374.656 and 2396.574 m³ km^?2 year^?1, respectively. The areas situated at the center and south parts of the watershed were subjected to significant erosion because of the geology formation and ground cover, while the area at the north parts was relatively less eroded due to intensive land cover. Based on effective of nine factors, the driving factors from high to low impact included: Topography > Land use > Upland erosion > Channel erosion > Climate > Ground cover > Soil > Runoff > Surface geology. The measured sediment yield of the watershed in the hydrometric station (Keshvar station) was approximately 2223.178 m³ km^?2 year^?1 and comparison of the amount of total sediment yield predicted by model with the measured sediment yield indicated that the MPSIAC model 38% underestimated the observed value of the watershed.     

Study of Dominant Factors Affecting Cerchar Abrasivity Index

The Cerchar abrasion index is commonly used to represent rock abrasion for estimation of bit life and wear in various mining and tunneling applications. Although the test is simple and fast, there are some discrepancies in the test results related to the equipment used, condition of the rock surface, operator skills, and procedures used in conducting and measuring the wear surface. This paper focuses on the background of the test and examines the influence of various parameters on Cerchar testing including pin hardness, surface condition of specimens, petrographical and geomechanical properties, test speed, applied load, and method of measuring wear surface. Results of Cerchar tests on a set of rock specimens performed at different laboratories are presented to examine repeatability of the tests. In addition, the preliminary results of testing with a new device as a potential alternative testing system for rock abrasivity measurement are discussed.     

Numerical study of power production from tidal energy in the Khuran Channel and its feedback on background hydrodynamics

This study focuses on the development of a farm of tidal turbines in the Khuran Channel. The important factors include the location of turbines and their hydrodynamic effects on the environment. A three-dimensional circulation model for the Persian Gulf is employed for the comprehensive evaluation of the tidal energy potential throughout the study area. The model is validated by using in situ observations of water level and current data.The appropriate potential points for extracting the tidal e...     

Hydrogeochemical investigation in an arid region of Iran (Tabas, Central Iran)

Groundwater is the most important source of water supply in Iran and understanding the geochemical evolution of groundwater is important for sustainable development of the water resources in Tabas area. A total of 29 samples of groundwater in Tabas area have been analyzed for ions and major elements. Groundwater of the study area is characterized by the dominance of Na–Cl water type. Groundwater was generally acidic to high alkaline with pH ranging from 5.42 to 10.75. The TDS as a function of mineralization characteristics of the groundwater ranged from 479 to 10,957 mg/l, with a mean value of 2,759 mg/l. The Ca²⁺, Mg²⁺, SO₄ ^2? and HCO₃ ^? were mainly derived from the dissolution of calcite, dolomite and gypsum. The Cu, Pb and Zn ions are not mobile in recent pH–Eh, but these conditions controlled dissolved Se, V and Mo in groundwater. The As is released in groundwater as a result of the weathering of sulfide minerals like arsenopyrite.     

Seismicity Characterization of Iran: A Multivariate Statistical Approach

This paper presents the results of two multivariate analysis techniques—principal component and cluster analysis—as they are applied to the seismicity characterization of Iran. The seismic data used in this study covers a period of 50 years, from the beginning of 1957 to the end of 2006. The values of eight seismic variables were calculated on a grid of equally spaced points at one geographic degree spacing in both latitude and longitude. The data matrix was analyzed using principal component and cluster analysis. Principal component analysis identified two significant components, introduced in this study as the Seismic Frequency Index (SFI) and the Seismic Severity Index (SSI), responsible for the data structure. The SFI and SSI explain 34.34 % and 32.33 % of the total variance of the data set, respectively, and allowed grouping of the selected variables according to their common features. The standardized data matrix was analyzed using Ward’s clustering method. The resulting seismicity pattern recognition maps of the region at three levels of similarity are presented. From these maps, differentiated seismic zones are outlined in detail and compared quantitatively. Comparison between the seismic zoning maps obtained in this analysis and the general tectonic map of the region indicates that the seismic zones are consistent with the tectonic zones of the region. This study presents the necessity and usefulness of multivariate analysis in evaluating and interpreting seismic data catalogues with the goal of obtaining more objective information about the seismicity pattern of regions.