Phase relations of a serpentine composition between 5 and 14 GPa: significance of clinohumite and phase E as water carriers into the transition zone

Run products from high pressure experiments at 800-1,200 °C and 5-14 GPa (corresponding to depths of 150 to 420 km) on a serpentine bulk composition [close to Mg₃Si₂O₅(OH)₄] were analysed by optical microscopy, micro-Raman spectroscopy and electron microprobe. All charges exhibit strong chemical zoning. Fluid, melt and hydrous solids were mostly concentrated at the top, bottom and along the wall of the capsules. The central part of the charge was devoid of H₂O. Both fluid and hydrous magnesian phases exhibit a Mg/Si ratio higher than forsterite. In contrast, the centre of the capsule was enriched in SiO₂. The observed zoning can neither be explained by gravitational settling nor by a thermal gradient alone. Most likely the fluid was separated from the solids by surface forces and thereby established the chemical gradient by preferentially dissolving MgO. If strong chemical zoning is taken into account, the occurrence of more phases than allowed by the phase rule can be explained by separating the bulk into several domains of different bulk compositions. Results indicate that small amounts of F increase the stability field of clinohumite, Mg₉Si₄O₁₆(OH,F)₂, compared to OH-clinohumite in pure MSH previously reported. Clinohumite coexists with enstatite up to 975 °C at 5 GPa, and up to 1,100 °C at 12 GPa. At 14 GPa (close to the !/#-Mg₂SiO₄ transition) phase E becomes the most important water carrier. The new results indicate that clinohumite could be an important mantle mineral for transporting water into the Earth's transition zone due to its high thermal stability compared to other important water carriers such as serpentine and phase A.     

Estimating groundwater recharge rates in the southeastern Holstein region, northern Germany

In the southeastern Holstein region, located to the east of the metropolitan zone of Hamburg, northern Germany, a groundwater investigation program was conducted from 1984 to 2000 by the State Agency for Nature and Environment (Landesamt für Natur und Umwelt, LANU) of Schleswig-Holstein, Germany, with the aim of providing long-term, ecologically acceptable groundwater management plans for the region. The focal point of the investigation comprised the determination of groundwater recharge rates. The investigation method was based on the transfer of available lysimeter results from other regions to comparable regions within the area studied. With the help of lysimeter equations, potential amounts of percolation water were calculated. The groundwater recharge rate was then determined after subtraction of the surface runoff which was calculated for the entire area. All computations were performed with a spreadsheet program. Groundwater recharge rates were calculated for two areas. One consisted of roughly determining groundwater recharge rates for the total region (1,392 km²) of southeastern Holstein. The overall goal of these investigations was to identify potential areas of water exploitation. Areas in which groundwater recharge rates are high and groundwater outflow is low are particularly suited to water exploitation, since inflow rates into deeper aquifers are high. These areas are located on the flanks of the Elbe and Stecknitz River valleys. Subsurface groundwater runoff to these lowlands would be reduced through groundwater withdrawal. However, the resulting decline in shallow groundwater tables would be so small that it would have no detrimental ecological effects. Groundwater recharge rates were also calculated for a 110-km² area in the outskirts of Hamburg (Grosshansdorf model area) which is intensively developed for water supply. These investigations showed that the amount of groundwater recharge is already being withdrawn to a large extent. Approximately 65% of the recharge rate is currently withdrawn by the waterworks in this area, thus making further increases in exploitation rates unjustifiable from an ecological point of view. Electronic Publication     

Application of transilient turbulent theory to study interactions between the atmospheric boundary layer and forest canopies

The new Forest-Land-Atmosphere ModEl called FLAME is presented. The first-order, nonlocal turbulence closure called transilient turbulence theory (Stull, 1993) is applied to study the interactions between a forested land-surface and the atmospheric boundary layer (ABL). The transilient scheme is used for unequal vertical grid spacing and includes the effects of drag, wake turbulence, and interference to vertical mixing by plant elements. Radiation transfer within the vegetation and the equations for the energy balance at the leaf surface have been taken from Norman (1979). Among others, the model predicts profiles of air temperature, humidity and wind velocity within the ABL, sensible and latent heat fluxes from the soil and the vegetation, the stomata and aerodynamic resistances, as well as profiles of temperature and water content in the soil. Preliminary studies carried out for a cloud free day and idealized initial conditions are presented. The canopy height is 30 m within a vertical domain of 3 km. The model is able to capture some of the effects usually observed within and above forested areas, including the relative wind speed maximum in the trunk space and the counter gradient-fluxes in the lower part of the plant stand. Of special interest is the determination of the location and magnitude of the turbulent mixing between model layers, which permits one to identify the effects of large eddies transporting momentum and scalar quantities into the canopy. A comparison between model simulations and field measurements will be presented in a future paper.     

Comparative hydrogeology – reference analysis of groundwater dynamics from neighbouring observation wells

ABSTRACT

Groundwater level fluctuations are caused by spatial and temporal superposition of processes within and outside the aquifer system. Most of the subsurface processes are usually observed on a small scale. Upscaling to the regional scale, as required for future climate change scenarios, is difficult due to data scarcity and increasing complexity. In contrast to the limited availability of system characteristics, high-resolution data records of groundwater hydrographs are more generally available. Exploiting the information contained in these records should thus be a priority for analysis of the chronical lack of data describing groundwater system characteristics. This study analyses the applicability of 63 indices derived from daily hydrographs to quantify different dynamics of groundwater levels in unconfined gravel aquifers from three groundwater regions (Bavaria, Germany). Based on the results of two different skill tests, the study aids index selection for different dynamic components of groundwater hydrographs.     

Volume contents

Volume Contents

Volume contents     

Geometry and chronology of growth and drowning of Middle Triassic carbonate platforms (Cernera and Bivera/Clapsavon) in the Southern Alps (northern Italy)

The depositional architecture and the geometric relationships between platform-slope deposits and basinal sediments along with paleontological evidence indicate the time interval of the younger Anisian Reitziites reitzi ammonoid zone to largely represent the main stage of platform aggradation at the Cernera and Bivera/Clapsavon carbonate platforms. Published and new U-Pb age data of zircons from volcaniclastic layers bracketing the stratigraphic interval of platform growth constrain the duration of platform evolution to a time span shorter than 1.8±0.7m.y., probably in the order of 0.5-1m.y., reflecting fast rates of vertical platform aggradation exceeding 500 m/m.y. In the range of growth potentials for shallow-water carbonate systems estimated in relation to the time span of observation, this high rate is in agreement with values for short intervals of 10⁵-10⁶yrs (e.g., Schlager 1999). After drowning, the platforms at Cernera and Bivera/Clapsavon were blanketed by thin pelagic carbonates. On the former platform flanks the draping sediments in places comprise red nodular pelagic limestones (Clapsavon Limestone) similar in facies to the Han Bulog Limestones occurring elsewhere in Middle Triassic successions of the Mediterranean Tethys. The drowning of vast areas of former carbonate platforms possibly triggered the onset of bottom-water circulation in adjacent basins as suggested by the abrupt transition from laminated to bioturbated pelagic nodular limestones in the Buchenstein Formation which occurred close to the time of initial platform submergence. During the Late Ladinian the topographic features of the drowned platforms were onlapped by rapidly deposited, predominantly clastic successions including coarse breccias and volcanic rocks sealing and preserving the peculiar stratigraphic setting.     

The energy balance experiment EBEX-2000. Part II: Intercomparison of eddy-covariance sensors and post-field data processing methods

The eddy-covariance method is the primary way of measuring turbulent fluxes directly. Many investigators have found that these flux measurements often do not satisfy a fundamental criterion—closure of the surface energy balance. This study investigates to what extent the eddy-covariance measurement technology can be made responsible for this deficiency, in particular the effects of instrumentation or of the post-field data processing. Therefore, current eddy-covariance sensors and several post-field data processing methods were compared. The differences in methodology resulted in deviations of 10% for the sensible heat flux and of 15% for the latent heat flux for an averaging time of 30 min. These disparities were mostly due to different sensor separation corrections and a linear detrending of the data. The impact of different instrumentation on the resulting heat flux estimates was significantly higher. Large deviations from the reference system of up to 50% were found for some sensor combinations. However, very good measurement quality was found for a CSAT3 sonic together with a KH20 krypton hygrometer and also for a UW sonic together with a KH20. If these systems are well calibrated and maintained, an accuracy of better than 5% can be achieved for 30-min values of sensible and latent heat flux measurements. The results from the sonic anemometers Gill Solent-HS, ATI-K, Metek USA-1, and R.M. Young 81000 showed more or less larger deviations from the reference system. The LI-COR LI-7500 open-path H₂O/CO₂ gas analyser in the test was one of the first serial numbers of this sensor type and had technical problems regarding direct solar radiation sensitivity and signal delay. These problems are known by the manufacturer and improvements of the sensor have since been made. The National Center for Atmospheric Research is supported by the National Science Foundation.     

Strain parameters of discontinuities in rock for finite element calculation

The bulk strain induced by excavation of rooms for storage of highly radioactive waste is usually unimportant, but the change in aperture and shear displacement of permeable fractures may be of practical importance. Hence, the normal and shear of such discontinuities have to be considered and are commonly predicted by using special deformation moduli termed “normal” and “shear” stiffnesses in numerical calculations. For the use of some finite element methods, these have to be converted to compression and shear moduli ,which, in turn, requires that the thickness of the discontinuity is known. The normal and shear strain can be expressed in terms of soil mechanical parameters, yielding the compression modulus M and the shear modulus G, with the required form for finite element calculations. By definition they are functions of the normal and shear stiffness K_n and K_s. It is concluded that calculation of the normal and shear strain of discontinuities with clastic fillings by the use of finite element methods and deformation moduli derived from stiffness numbers is very uncertain except when the geometry of the weaknesses can be accurately defined.     

Applications of a two-flow model for remote sensing of substances in water

A version of the two-flow radiative transfer model is presented as a simple method to study the relationship between substances in water and the backscattered radiation field. It is shown that under the assumption of a diffuse radiative input into a water body, the irradiance attenuation coefficient k can be regarded as an inherent property. A cuvette system is presented which allows one to measure and calculate the attenuation coefficient k, the absorption coefficient a and the backscattering coefficient Bb of various substances. The model can be used to check the applicability of a remote sensing technique for a specific research area and for specific parameters, and to estimate the expected accuracy, and the signal depth. The inversion of the model can be applied as a technique to estimate concentrations in water from the backscattered radiation. The critical assumption of a diffuse radiative input and transfer, which has to be made when using the model for natural conditions, is discussed.The research work was supported by the Deutsche Forschungsgemeinschaft.