Response of unconfined turbidity current to normal‐fault topography

Turbidity currents descending the slopes of deep‐water extensional basins or passive continental margins commonly encounter normal‐fault escarpments, but such large‐magnitude phenomena are hydraulically difficult to replicate at small scale in the laboratory. This study uses advanced computational fluid dynamics numerical simulations to monitor the response of large, natural‐scale unconfined turbidity currents (100 m thick and 2000 m wide at the inlet gate) to normal‐fault topography with a maximum relief of nearly 300 m. For comparative purposes, the turbidity current is first released on a non‐faulted pristine slope of 1·5° (simulation model 1). The expanding and waxing flow bypasses the slope without recognizable deposition within the visibility limit of 8 vol.% sand grain packing. Similar flow is then released towards the tip (model 2) and towards the centre (model 3) of a normal‐fault escarpment. In both of these latter models, the sand carried by flow tends to be entrapped in four distinct depozones: an upslope near‐gate zone of flow abrupt expansion and self‐regulation; a flow‐transverse zone at the fault footwall edge; a flow‐transverse zone at the immediate hangingwall; and a similar transverse zone near the crest of the hangingwall counter‐slope, where some of the deposited sand also tends to be reshuffled to the previous zone by a secondary reverse underflow. The near‐bottom reverse flow appears to be generated on a counter‐slope of 1·1°, increased to 2·0° by deposition. The Kelvin–Helmholtz interface instability plays an important role by causing three‐dimensional fluctuations in the flow velocity magnitude and sediment concentration. The thick deposits of large single‐surge flows may thus show hydraulic fluctuations resembling those widely ascribed to hyperpycnal flows. The study indicates further that the turbiditic slope fans formed on such fault topographies are likely to be patchy and hence may differ considerably from the existing slope‐fan conceptual models when it comes to the spatial prediction of main sand depozones.     

A Wet/Wet Differential Pressure Sensor for Measuring Vertical Hydraulic Gradient

Vertical hydraulic gradient is commonly measured in rivers, lakes, and streams for studies of groundwater–surface water interaction. While a number of methods with subtle differences have been applied, these methods can generally be separated into two categories; measuring surface water elevation and pressure in the subsurface separately or making direct measurements of the head difference with a manometer. Making separate head measurements allows for the use of electronic pressure sensors, providing large datasets that are particularly useful when the vertical hydraulic gradient fluctuates over time. On the other hand, using a manometer-based method provides an easier and more rapid measurement with a simpler computation to calculate the vertical hydraulic gradient. In this study, we evaluated a wet/wet differential pressure sensor for use in measuring vertical hydraulic gradient. This approach combines the advantage of high-temporal frequency measurements obtained with instrumented piezometers with the simplicity and reduced potential for human-induced error obtained with a manometer board method. Our results showed that the wet/wet differential pressure sensor provided results comparable to more traditional methods, making it an acceptable method for future use.     

Mobile evaporite controls on the structural style and evolution of rift basins: Danish Central Graben,North Sea

The Southern Tail‐End Graben, Danish Central Graben, is characterized by a lateral variation in the thickness and mobility of pre‐rift Zechstein Supergroup evaporites, allowing investigation of how supra‐basement evaporite variability influences rift structural style and tectono‐stratigraphy. The study area is divided into two structural domains based on interpretations of the depositional thickness and mobility of the Zechstein Supergroup. Within each domain, we examine the overall basin morphology and the structural styles in the pre‐Zechstein and supra‐Zechstein (cover) units. Furthermore, integration of two‐way travel‐time (TWT)‐structure and ‐thickness maps allows fault activity and evaporite migration maps to be generated for pre‐ and syn‐rift stratal units within the two domains, permitting constraints to be placed on: (i) the timing of activity on pre‐Zechstein and cover faults and (ii) the onset, duration and migration direction of mobile evaporites. The northern domain is interpreted to be free from evaporite‐influence, and has developed in a manner typical of brittle‐only, basement‐involved rifts. Syn‐rift basins display classical half‐graben geometries bounded by thick‐skinned faults. In contrast, the southern domain is interpreted to be evaporite‐influenced, and cover structure reflects a southward increase in the thickness and mobility of the Zechstein Supergroup evaporites. Fault‐related and evaporite‐related folding is prominent in the southern domain, together with variable degrees of decoupling of sub‐Zechstein and cover fault and fold systems. The addition of mobile evaporites to the rift results in: (i) complex and spatially variable modes of tectono‐stratigraphic evolution; (ii) syn‐rift stratal geometries which are condensed above evaporite swells and over‐thickened in areas of withdrawal; (iii) compartmentalized syn‐rift depocentres; and (iv) masking of rift‐related megasequence boundaries. Through demonstrating these deviations from the characteristics of rifts free from evaporite influence, we highlight the first order control evaporites may exert upon rift structural style and the distribution and thicknesses of syn‐rift units.     

Cenozoic cooling and denudation in the North Pennines (northern England,UK) constrained by apatite fission-track analysis of cuttings from the Eastgate Borehole

The Cenozoic landscape development of Britain remains relatively poorly understood. On the one hand, ‘plumists’ have tried to explain the present-day topography as a consequence of effects of the Iceland mantle plume during the Palaeocene-Eocene British Tertiary Igneous Province (BTIP) magmatism, with little or no subsequent modification. On the other hand, abundant evidence exists from fluvial and marine terraces and superimposed karstic levels for significant vertical crustal motions during the Quaternary, which clearly has nothing to do with any mantle plume. To shed light on this issue, we present the first publication of data that constrain the Cenozoic thermal history of the North Pennine uplands of northern England, from apatite fission-track analysis of drill cuttings from the Eastgate Borehole in Weardale, in the western part of County Durham. Our results indicate ～650 m of regional denudation since the latest Oligocene/Early Miocene, plus the ～400 m of localized entrenchment that has created the modern Weardale valley. Before the latest Oligocene/Early Miocene, but following the BTIP magmatism, the crust in this region experienced significant cooling, mainly due to a decrease in the geothermal gradient from ～55 to 61 °C km^?1 to the present 38 °C km^?1, along with ～300 ± 200 m of denudation. Although significant BTIP magmatism occurred in northern England, it thus had only a limited net effect; the crust experienced dramatic heating, but cooled back to its original thermal state within, at most, a few tens of millions of years. We suggest that this rapid cooling effect resulted from westward flow of relatively cold material within the mobile lower-crustal layer, driven by the lateral pressure gradient induced by earlier heating effects and effects of surface processes. Whatever topography developed during the Palaeogene, as a direct result of these heating effects, underplating at the base of the crust, and the associated modest denudation, was presumably also short-lived; significant changes to the crustal thickness, and thus to the topography, can be envisaged as a consequence of subsequent lower-crustal flow.     

Quantitative multi-risk analysis for natural hazards: a framework for multi-risk modelling

This paper introduces a generic framework for multi-risk modelling developed in the project ‘Regional RiskScape’ by the Research Organizations GNS Science and the National Institute of Water and Atmospheric Research Ltd. (NIWA) in New Zealand. Our goal was to develop a generic technology for modelling risks from different natural hazards and for various elements at risk. The technical framework is not dependent on the specific nature of the individual hazard nor the vulnerability and the type of the individual assets. Based on this generic framework, a software prototype has been developed, which is capable of ‘plugging in’ various natural hazards and assets without reconfiguring or adapting the generic software framework. To achieve that, we developed a set of standards for treating the fundamental components of a risk model: hazards, assets (elements at risk) and vulnerability models (or fragility functions). Thus, the developed prototype system is able to accommodate any hazard, asset or fragility model, which is provided to the system according to that standard. The software prototype was tested by modelling earthquake, volcanic ashfall, flood, wind, and tsunami risks for several urban centres and small communities in New Zealand.     

The Pleistocene terrace staircase of the River Thame, central-southern England, and its significance for regional stratigraphic correlation, drainage development, and vertical crustal motions

The Thame is one of the principal left-bank affluents of the Thames, the largest river in southern England; it joins the Upper Thames at Dorchester, ∼20 km downstream of Oxford. Its terraces include a younger group of four, which date from the late Middle Pleistocene and Late Pleistocene, are disposed subparallel to the modern river, and represent drainage within the modern catchment. At higher levels there are three older terraces, the Three Pigeons, Tiddington and Chilworth terraces, which are assigned to MIS 16, 14 and 12. With much gentler downstream gradients, these are fragmentary remnants of much more substantial fluvial deposits, indicating a much larger river that was disrupted by the Anglian (MIS 12) glaciation. This interpretation supersedes an earlier view that the glacigenic deposits in the Thame headwaters correlate with the Blackditch terrace, the highest of the younger group, which has hitherto provided an argument that the glaciation in this region occurred in MIS 10. It is suggested that the headwaters of the pre-Anglian ‘Greater Thame’ river were located near Northampton and that the Milton Sands of that area represent an upstream counterpart of the Chilworth terrace deposits. It is envisaged that this early Middle Pleistocene drainage geometry, located between the Jurassic limestone and Chalk escarpments, developed as a result of the increase in uplift rates that followed the Mid-Pleistocene Revolution (MPR). It is suggested that before this time, including during the Early Pleistocene, the modern Thame catchment and adjacent regions drained southeastward through the Chalk escarpment, but these small rivers lacked the erosional power to cut through the Chalk in pace with the faster uplift occurring in the early Middle Pleistocene, and so became diverted to the southwest, subparallel to the Chalk escarpment, to form the pre-Anglian ‘Greater Thame’ tributary of the Upper Thames. The post-MPR uplift is estimated to decrease northwestward from 90 m in the Middle Thames to 75 m near the Thame-Thames confluence and to 65 m upstream of Oxford. The post-Anglian (post-450 ka) component of uplift decreases northward from 33 m near the Thame-Thames confluence to an estimated ∼20 m in the Northampton area; the relative stability of the latter area makes feasible the proposed correlation between the Milton Sands and the pre-Anglian River Thame. Limited post-Anglian uplift in the Northampton area is also inferred from the upstream convergence of the terraces of the modern rivers Nene and Great Ouse. These observed lateral variations in vertical crustal motions reflect lateral variations in crustal properties (including heat flow, crustal thickness, and thickness of underplating at the base of the crust) that are known independently. This study thus provides, for the first time, an integrated explanation of the Pleistocene drainage development across a large region of central-southern England.     

Overlapping distributions of cryptic Scoloplos cf. armiger species in the western Wadden Sea

Unknowingly lumping cryptic species in biological monitoring studies hinders progress in understanding their functioning in a wide range of research fields including population dynamics, ecophysiology and community ecology. The common polychaete worm Scoloplos cf. armiger is a cryptic species complex comprising entirely different developmental modes: holobenthic and pelago-benthic development. In the northeast Atlantic, three putative species have been described on the basis of molecular data and a breeding study. We report on the development of a fast genotyping assay and on the occurrence and distribution of different molecular types in the western Wadden Sea. The genotyping assay consists of PCR-RFLP analysis by two enzymes of a mitochondrial (cox3-trnQ-nad6) DNA segment. A new, fourth type was observed and this was the only type whose geographical distribution was not uniform but instead skewed toward the eastern part of the study area. All three hitherto known types were also observed and these three displayed a significant difference in depth distribution within the study area. This is the first ecological difference reported for the ‘Subtidal Clade’ (SC) versus the ‘Type Locality Clade’ (TLC). The new type (‘Intertidal Clade 2’) had a similar distribution to what is known as the Intertidal Clade (IC). However, the most striking observation is the large degree of overlap between the depth distributions in the western Wadden Sea, where the clade names ‘Intertidal’ and ‘Subtidal’ do not necessarily reflect local species composition. The necessity to genotype Scoloplos cf. armiger in monitoring programs is emphasized.     

The spatial and temporal patterns of aggradation in a temperate,upland, gravel‐bed river

Intensive field monitoring of a reach of upland gravel‐bed river illustrates the temporal and spatial variability of in‐channel sedimentation. Over the six‐year monitoring period, the mean bed level in the channel has risen by 0·17 m with a maximum bed level rise of 0·5 m noted at one location over a five month winter period. These rapid levels of aggradation have a profound impact on the number and duration of overbank flows with flood frequency increasing on average 2·6 times and overbank flow time increasing by 12·8 hours. This work raises the profile of coarse sediment transfer in the design and operation of river management, specifically engineering schemes. It emphasizes the need for the implementation of strategic monitoring programmes before engineering work occurs to identify zones where aggradation is likely to be problematic. Exploration of the sediment supply and transfer system can explain patterns of channel sedimentation. The complex spatial, seasonal and annual variability in sediment supply and transfer raise uncertainties into the system's response to potential changes in climate and land‐use. Thus, there is a demand for schemes that monitor coarse sediment transfer and channel response. Copyright © 2009 John Wiley & Sons, Ltd.