Hydrodynamic simulations of propagating warps and bending waves in accretion discs

We present the results of a study of propagating warp or bending waves in accretion discs. Three-dimensional hydrodynamic simulations were performed using smoothed particle hydrodynamics (SPH), and the results are compared with calculations based on the linear theory of warped discs.
We examine the response of a gaseous disc to an initially imposed warping disturbance under a variety of physical conditions. We consider primarily the physical regime in which the dimensionless viscosity parameter α < H r , where H r is the disc aspect ratio, so that bending waves are expected to propagate. We also performed calculations for disc models in which α > H r , where the warps are expected to evolve diffusively. Small-amplitude (linear) perturbations are studied in both Keplerian and slightly non-Keplerian discs, and we find that the results of the SPH calculations can be reasonably well fitted by those of the linear theory. The main results of these calculations are: (i) the warp in Keplerian discs when α < H r propagates with little dispersion, and damps at a rate expected from estimates of the code viscosity; (ii) warps evolve diffusively when α > H r ; (iii) the slightly non-Keplerian discs lead to a substantially more dispersive behaviour of the warps, which damp at a similar rate to the Keplerian case, when α < H r .
Initially imposed higher amplitude, non-linear warping disturbances were studied in Keplerian discs. The results indicate that non-linear warps can lead to the formation of shocks, and that the evolution of the warp becomes less wave-like and more diffusive in character.
This work is relevant to the study of the warped accretion discs that may occur around Kerr black holes or in misaligned binary systems, and is mainly concerned with discs in which α < H r . The results indicate that SPH can model the hydrodynamics of warped discs, even when using rather modest numbers of particles.     

Space weathering on the Moon: Patina on Apollo 17 samples 75075 and 76015

Abstract— We studied patinas on lunar rocks 75075 and 76015 from the Apollo collection using a multi-disciplinary approach, including scanning electron microscopy (SEM), energy dispersive x-ray spectrometry (EDS), transmission electron microscopy (TEM), wavelength-dispersive x-ray (WDS) mapping, Mössbauer spectroscopy, spectral reflectance, and microspectrophotometry. Based on SEM petrography, we have defined three textural types of patina: glazed, fragmental, and classic (cratered). The presence of classic patina is diagnostic of lunar samples that have been exposed directly to the space weathering environment. It is characterized by the presence of microcraters and glass pancakes and is the patina type studied by earlier workers. Classic patina is found on 76015 but not on 75075. Glazed patina is found on both 76015 and 75075, whereas fragmental patina is found only on 75075. The glazed and fragmental patinas on 75075 were probably formed as a result of relatively large nearby impacts; and although these two types of patina are not strictly the result of direct exposure to the space weathering environment, they are important because they affect the optical properties of the rocks. Field emission gun SEM (FE-SEM) of classic patina on 76015 shows evidence of possible solar wind sputtering erosion. Transmission electron microscope studies of 76015 reveal the presence of impact-generated deposits and solar flare particle tracks which, like microcraters and pancakes, are diagnostic of direct exposure to space weathering processes. The outermost surface of the 76015 patina consists of an amorphous rim very much like the rims found on individual lunar soil grains; this amorphous patina rim probably formed by similar processes of impact-generated vapor condensation and possible sputter deposition. Wavelength-dispersive x-ray element maps of polished thin sections of 75075 and 76015 indicate that patina compositions are poor indicators of the compositions and mineralogies of the rocks underlying them. On average, the reflectance spectra of patinas on both samples are slightly darker than those of their unweathered equivalents. Microreflectance measurements show that a thick patina can dramatically alter the optical properties of the rock on which it forms. The backscatter Mössbauer (BaMS) spectrum of a patina-covered surface of 76015 is very similar to that of an unweathered surface, indicating that the Mössbauer signal is generated from beneath the patina. Because BaMS “sees” through surface space-weathering effects to the underlying rock, this technique has great potential for use in robotic missions to other planetary bodies.     

加拿大内陆水的保护

Contrary to general international perception, Canada does not have an unlimited supply of freshwater. However, because Canada has a small population, it does have a generous water allocation on a per capita basis. Nor is Canada immune from water quality problems:its cold continental climate, urbanization and industrial activities all contribute to water quality concerns and deterioration. Generally, the authority to manage water in Canada is held by the country''s provincial governments. The Great Lakes basin is the world''s largest freshwater ecosystem and is located in Canada''s industrial heartland. Water issues, starting with phosphorus in the 1960''s, created international headlines. In the 1970''s toxics became the predominant issue and this led to the Great Lakes Water Quality Agreement which established the ecosystem approach to water quality management. This approach is now the standard approach to water quality management and has been successfully applied to a number of other lake and river ecosystems in Canada. While there have been improvements in the water quality of the Great Lakes much remains to be done on toxic elimination and the large contaminant stores in the sediments. Atmospheric deposition has become a significant source of chemicals from outside the basin The Canadian prairies, the agricultural heartland of Canada, is one major ecozone that has not been selected to have current and potential water quality problems examined by a federal government program. Both the quantity and quality of water in this region are potentially significant factors limiting economic diversification and sustainable development in this vast and ecologically disturbed region.     

Using constrained inversion of gravity and magnetic field to produce a 3D litho‐prediction model

Geologically constrained inversion of gravity and magnetic field data of the Victoria property (located in Sudbury, Canada) was undertaken in order to update the present three‐dimensional geological model. The initial and reference model was constructed based on geological information from over 950 drillholes to constrain the inversion. In addition, downhole density and magnetic susceptibility measured in six holes were statistically analysed to derive lower and upper bounds on the physical properties attributed to the lithological units in the reference model. Constrained inversion of the ground gravity and the airborne magnetic data collected at the Victoria property were performed using GRAV3D and MAG3D, respectively. A neural network was trained to predict lithological units from the physical properties measured in six holes. Then, the trained network was applied on the three‐dimensional distribution of physical properties derived from the inversion models to produce a three‐dimensional litho‐prediction model. Some of the features evident in the lithological model are remnants of the constraints, where the data did not demand a significant change in the model from the initial constraining model (e.g., the thin pair of diabase dykes). However, some important changes away from the initial model are evident; for example, a larger body was predicted for quartz diorite, which may be related to the prospective offset dykes; a new zone was predicted as sulfide, which may represent potential mineralisation; and a geophysical subcategory of metabasalt was identified with high magnetic susceptibility and high density. The litho‐prediction model agrees with the geological expectation for the three‐dimensional structure at Victoria and is consistent with the geophysical data, which results in a more holistic understanding of the subsurface lithology.     

Simulating Stable Isotope Ratios in Plumes of Groundwater Pollutants with BIOSCREEN‐AT‐ISO

BIOSCREEN is a well‐known simple tool for evaluating the transport of dissolved contaminants in groundwater, ideal for rapid screening and teaching. This work extends the BIOSCREEN model for the calculation of stable isotope ratios in contaminants. A three‐dimensional exact solution of the reactive transport from a patch source, accounting for fractionation by first‐order decay and/or sorption, is used. The results match those from a previously published isotope model but are much simpler to obtain. Two different isotopes may be computed, and dual isotope plots can be viewed. The dual isotope assessment is a rapidly emerging new approach for identifying process mechanisms in aquifers. Furthermore, deviations of isotope ratios at specific reactive positions with respect to “bulk” ratios in the whole compound can be simulated. This model is named BIOSCREEN‐AT‐ISO and will be downloadable from the journal homepage.     

Experimental study of deformable connection consisting of buckling‐restrained brace and rubber bearings to connect floor system to lateral force resisting system

This paper presents experimental and numerical studies of a full‐scale deformable connection used to connect the floor system of the flexible gravity load resisting system to the stiff lateral force resisting system (LFRS) of an earthquake‐resistant building. The purpose of the deformable connection is to limit the earthquake‐induced horizontal inertia force transferred from the floor system to the LFRS and, thereby, to reduce the horizontal floor accelerations and the forces in the LFRS. The deformable connection that was studied consists of a buckling‐restrained brace (BRB) and steel‐reinforced laminated low‐damping rubber bearings (RB). The test results show that the force–deformation responses of the connection are stable, and the dynamic force responses are larger than the quasi‐static force responses. The BRB+RB force–deformation response depends mainly on the BRB response. A detailed discussion of the BRB experimental force–deformation response is presented. The experimental results show that the maximum plastic deformation range controls the isotropic hardening of the BRB. The hardened BRB force–deformation responses are used to calculate the overstrength adjustment factors. Details and limitations of a validated, accurate model for the connection force–deformation response are presented. Numerical simulation results for a 12‐story reinforced concrete wall building with deformable connections show the effects of including the RB in the deformable connection and the effect of modeling the BRB isotropic hardening on the building seismic response. Copyright © 2016 John Wiley & Sons, Ltd.     

Sediment and nutrient storage in a beaver engineered wetland

Beavers, primarily through the building of dams, can deliver significant geomorphic modifications and result in changes to nutrient and sediment fluxes. Research is required to understand the implications and possible benefits of widespread beaver reintroduction across Europe. This study surveyed sediment depth, extent and carbon/nitrogen content in a sequence of beaver pond and dam structures in South West England, where a pair of Eurasian beavers (Castor fiber) were introduced to a controlled 1.8 ha site in 2011. Results showed that the 13 beaver ponds subsequently created hold a total of 101.53 ± 16.24 t of sediment, equating to a normalised average of 71.40 ± 39.65 kg m². The ponds also hold 15.90 ± 2.50 t of carbon and 0.91 ± 0.15 t of nitrogen within the accumulated pond sediment. The size of beaver pond appeared to be the main control over sediment storage, with larger ponds holding a greater mass of sediment per unit area. Furthermore, position within the site appeared to play a role with the upper‐middle ponds, nearest to the intensively‐farmed headwaters of the catchment, holding a greater amount of sediment. Carbon and nitrogen concentrations in ponds showed no clear trends, but were significantly higher than in stream bed sediment upstream of the site. We estimate that >70% of sediment in the ponds is sourced from the intensively managed grassland catchment upstream, with the remainder from in situ redistribution by beaver activity. While further research is required into the long‐term storage and nutrient cycling within beaver ponds, results indicate that beaver ponds may help to mitigate the negative off‐site impacts of accelerated soil erosion and diffuse pollution from agriculturally dominated landscapes such as the intensively managed grassland in this study. © 2018 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd.     

Effects of rainfall,overland flow and their interactions on peatland interrill erosion processes

Interrill erosion processes on gentle slopes are affected by mechanisms of raindrop impact, overland flow and their interaction. However, limited experimental work has been conducted to understand how important each of the mechanisms are and how they interact, in particular for peat soil. Laboratory simulation experiments were conducted on peat blocks under two slopes (2.5° and 7.5°) and three treatments: Rainfall, where rainfall with an intensity of 12 mm h^?1 was simulated; Inflow, where upslope overland flow at a rate of 12 mm h^?1 was applied; and Rainfall + Inflow which combined both Rainfall and Inflow. Overland flow, sediment loss and overland flow velocity data were collected and splash cups were used to measure the mass of sediment detached by raindrops. Raindrop impact was found to reduce overland flow by 10 to 13%, due to increased infiltration, and reduce erosion by 47% on average for both slope gradients. Raindrop impact also reduced flow velocity (80–92%) and increased roughness (72–78%). The interaction between rainfall and flow was found to significantly reduce sediment concentrations (73–85%). Slope gradient had only a minor effect on overland flow and sediment yield. Significantly higher flow velocities and sediment yields were observed under the Rainfall + Inflow treatment compared to the Rainfall treatment. On average, upslope inflow was found to increase erosion by 36%. These results indicate that overland flow and erosion processes on peat hillslopes are affected by upslope inflow. There was no significant relationship between interrill erosion and overland flow, whereas stream power had a strong relationship with erosion. These findings help improve our understanding of the importance of interrill erosion processes on peat. Copyright © 2017 John Wiley & Sons, Ltd.