Study on “J”Type Offshore Pipeline-Laying Method

-Considering both the seabed foundation and wave, an analytic model of "J" type is proposed for offshore pipeline-laying. The governing differential equation is also obtained for the pipeline on the seabed and for the suspension sections. By utilizing weighted- residual method and dual iteration technique, an approximate solution is obtained, too. In the end, calculation examples are given for analyzing the changeable relationship among the major parameters.     

Design of Mooring System for Oil Storage Vessels

The floating oil storage system has been proposed as a new facility for Strategic Petroleum Reserve (SPR) in China. Mooring is one of the key technologies to ensure the safety, reliability, and performance of the oil storage system. This paper describes the concept, analysis, design and reliability of the mooring system. For mooring system design of these oil vessels, analysis is essential of the behavior of the vessel in connection with mooring facilities of nonlinear resilience. A nonlinear mathematical model for analyzing a moored vessel is established and solved. Some results of numerical simulations are presented. Assessment of the safety regarding the mooring system in terms of failure probability is carried out. Another simulation model for calculating the failure probability of the mooring system is proposed. The design parameters that have an influence on the characteristics of the failure probability have been identified. The simulation results show that the mooring system has an annual reliab     

Molecular identification of bloom-forming species Phaeocystis globosa(Prymnesiophyta)and its dispersal based on rDNA ITS sequence analysis

Abstract-The colony-forming Phaeocystis species are causative agents of dense bloom occurrences incoastal waters worldwide. It is difficult to separate them because of the different morphologies associatedwith their colonial stages. In this study we applied molecular approaches to analyze the genetic variationof Phaeocystis globosa and Phaeocystis pouchetii from several geogrtaphic regions, and to assist in tracingthe dispersal of bloom-forming Phaeocystis species in coastal waters of China. The Sequences of the inter-nal transcribed sacers (ITS1 and ITS2) of rDNA and the 5.8S ribosomal RNA gene of Phaeocystisstrains were determined. Sequence comparison shows that P.globosa was the most divergent toP. pouchetii, exhibiting sequence divergence higher than 0.08. However, lower genetic divergences ex-isted between strains of P.globosa. The sequence comparison of the Phaeocystis rDNA ITS clearlyshows that the species isolated from the southeast coast of China is identified as P. globosa rather thanP. cf. po     

Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.     

The Structure of A Turbulent Jet in A Crossflow-Effect of Jet-Crossflow Velocity

A comprehensive numerical study on the three-dimensional structure of a turbulent jet in crossflow is performed. The jet-to-crossflow velocity ratio (R) varies in the range of 2 - 16; both vertical jets and inclined jets without excess streamwise momentum are considered. The numerical results of the Standard two-equation k-ε model show that the turbulent structure can be broadly categorised according to the jet-to-crossflow velocity ratio. For strong to moderate jet discharges, i.e. R> 4, the jet is characterized by a longitudinal transition through a bent-over phase during which the jet becomes almost parallel with the main freestream, to a sectional vortex-pair flow with double concentration maxima; the computed flow details and scalar mixing characteristics can be described by self-similar relations beyond a dimensionless distance of around 20-60. The similarity coefficients are only weakly dependent on R. The cross-section scalar field is kidney-shaped and bifurcated, vvith distinct double concentr     

Regression Formulations for the Stress at Hot Spot of Multiplanar Tubular DT Joints

- Stress concentration analysis of multiplanar tubular DT joints plays an important role in the fatigue design of offshore platforms. A semi-analytic method for stress analysis under the condition of any loads is briefly introduced in the paper. Nineteen multiplanar tubular DT joints with one of two braces of the same dimension subjected to axial loads and out- of- plane bending moments are computed for parametric stress analysis by using the present method. The influence of geometrical parameters on the stresses of multiplanar tubular DT joints is discussed and compared with corresponding uniplanar T joints. The regression formulae for the stress at hot spot of multiplanar DT joints are found by modification of SCF of corresponding uniplanar T joints. The parametric formulae for the maximum stress by superposition. Finally, the influences of stiffening effect and load-interaction effect on the maximum stress of DT joints are discussed.     

Effect of Sea Level Variation on Tidal Characteristic Values for the East China Sea

1 .IntroductionTheglobalairtemperatureroseabout 0 .5～ 0 .6°Coverthepast 2 0thcentury ,andtheglobalmeansealevelincreasedbyabout2 0cmduringtheperiod .Theregionalmeansealevelriseswiththerisingglobalmeansealevel.Zuoetal.( 1 997)indicatedthatthemeanrisingrateofabsolutemeansealevelalongtheChinacoastontheassumptionofunifiedisostaticdatumis 2mm a .Woodworth( 1 999)analyzedsealevelspanning 1 76 8tothepresentinLiverpool,andobtainedaseculartrendforheperiodupto 1 880of0 .39± 0 .1 7mm a ,andatrendfort…     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

Estimation of Water Particle Velocities by Empirical Transfer Function

-In previous and this studies it appears that the linear and nonlinear wave theory can notaccurately and easily predict the water particle velocities.Therefore,different from the theoretical consider-ations,in this study we have attempted to determine the transfer function empirically.Laboratory experi-ments were performed under various wave conditions.The empirical formulas of the transfer function ofthe wave height,angular frequency and water particle velocity were obtained on the basis of these test databy dimensional analysis and regression analysis.In intermediate and deep water depth conditions,thetransfer function was only a function of a nondimensional parameter which is composed of the angular fre-quency,the depth of the velocity gauge under the still water level,water depth and the acceleration of grav-ity.Finally,the empirical formulas were compared with experimental data and observational data formpresent and Cavaleri's(1978)studies.The empirical formulas were found to be in sufficient correl