New friends in new places: Network formation during the migration process among Poles in the UK

This paper contributes to on-going work that seeks to understand the dynamic nature of immigrant social network formation. We explore three propositions, derived from the literature, that might be expected to characterise the ways in which migrant associational ties evolve during and immediately after arrival in their destination country. Evidence is drawn from 42 interviews conducted between January and December 2008 with predominantly Polish migrants to the UK (28) as well as domestic service providers (14). In agreement with the existing literature on immigrant social network formation we find that weak associational ties between migrants are locally dense and rapidly formed. More surprisingly, we also find that the Poles in our sample from lower socio-economic groups tended to rely heavily upon weak associational ties while higher socio-economic group Poles tended to rely on associations made through their employing institutions. This illustrates the importance of socio-economic status in framing co-ethnic migrant network formation. This is significant because we also find that weak associational ties are not unambiguously beneficial to lower socio-economic group migrants who tend to (have to be) more compromising about, and therefore more compromised by, the social ‘friendships’ that result.     

Sedimentary recycling in arc magmas: geochemical and U–Pb–Hf–O constraints on the Mesoproterozoic Suldal Arc, SW Norway

The Hardangervidda-Rogaland Block within southwest Norway is host to ~1.52 to 1.48 Ga continental building and variable reworking during the ~1.1 to 0.9 Ga Sveconorwegian orogeny. Due to the lack of geochronological and geochemical data, the timing and tectonic setting of early Mesoproterozoic magmatism has long been ambiguous. This paper presents zircon U–Pb–Hf–O isotope data combined with whole-rock geochemistry to address the age and petrogenesis of basement units within the Suldal region, located in the centre of the Hardangervidda-Rogaland Block. The basement comprises variably deformed grey gneisses and granitoids that petrologically and geochemically resemble mature volcanic arc lithologies. U–Pb ages confirm that magmatism occurred from ~1,521 to 1,485 Ma, and conspicuously lack any xenocrystic inheritance of distinctly older crust. Hafnium isotope data range from εHf_(initial) +1 to +11, suggesting a rather juvenile magmatic source, but with possible involvement of late Palaeoproterozoic crust. Oxygen isotope data range from mantle-like (δ¹⁸O ~5 ‰) to elevated (~10 ‰) suggesting involvement of low-temperature altered material (e.g., supracrustal rocks) in the magma source. The Hf–O isotope array is compatible with mixing between mantle-derived material with young low-temperature altered material (oceanic crust/sediments) and older low-temperature altered material (continent-derived sediments). This, combined with a lack of xenoliths and xenocrysts, exposed older crust, AFC trends and S-type geochemistry, all point to mixing within a deep-crustal magma-generation zone. A proposed model comprises accretion of altered oceanic crust and the overlying sediments to a pre-existing continental margin, underthrusting to the magma-generation zone and remobilisation during arc magmatism. The geodynamic setting for this arc magmatism is comparable with that seen in the Phanerozoic (e.g., the Sierra Nevada and Coast Range batholiths), with compositions in the Suldal Sector reaching those of average upper continental crust. As within these younger examples, factors that drive magmatism towards the composition of the average continental crust include the addition of sedimentary material to magma source regions, and delamination of cumulate material. Underthrusting of sedimentary materials and their subsequent involvement in arc magmatism is perhaps a more widespread mechanism involved in continental growth than is currently recognised. Finally, the Suldal Arc magmatism represents a significant juvenile crustal addition to SW Fennoscandia.     

Effect of melt composition on basalt and peridotite interaction: laboratory dissolution experiments with applications to mineral compositional variations in mantle xenoliths from the North China Craton

Interaction between basaltic melts and peridotites has played an important role in modifying the lithospheric and asthenospheric mantle during magma genesis in a number of tectonic settings. Compositions of basaltic melts vary considerably and may play an important role in controlling the kinetics of melt–peridotite interaction. To better understand the effect of melt composition on melt–peridotite interaction, we conducted spinel lherzolite dissolution experiments at 2 GPa and 1,425 °C using the dissolution couple method. The reacting melts include a basaltic andesite, a ferro-basalt, and an alkali basalt. Dissolution of lherzolite in the basaltic andesite and the ferro-basalt produced harzburgite–lherzolite sequences with a thin orthopyroxenite layer at the melt–harzburgite interface, whereas dissolution of lherzolite in the alkali basalt produced a dunite–harzburgite–lherzolite sequence. Systematic variations in mineral compositions across the lithological units are observed. These mineral compositional variations are attributed to grain-scale processes that involve dissolution, precipitation, and reprecipitation and depend strongly on reacting melt composition. Comparison of mineral compositional variations across the dissolution couples with those observed in mantle xenoliths from the North China Craton (NCC) helps to assess the spatial and temporal variations in the extent of siliceous melt and peridotite interaction in modifying the lithospheric mantle beneath the NCC. We found that such melt–rock interaction mainly took place in Early Cretaceous, and is responsible for the enrichment of pyroxene in the lithospheric mantle. Spatially, siliceous melt–peridotite interaction took place in the ancient orogens with thickened lower crust.     

Groundwater supply and demand from southern Africa’s crystalline basement aquifer: evidence from Malawi

Failure of borehole sources in weathered and fractured crystalline basement aquifers in Malawi in southern Africa has been linked with poor borehole design, mechanical failure and badly sited boreholes. However, recent work in Malawi indicates that demand may now exceed long-term resource potential in some places and that this is also a cause of water point failure. An 11-year climate cycle (including a wet and dry period) necessitates overdraft from groundwater storage during the dry-cycle years before episodic rainfall events in the wetter part of the cycle again recharge the aquifers. Data, particularly groundwater hydrograph data, are sparse, but sufficient to evaluate the long-term renewable groundwater potential for both fractured and weathered basement-aquifer types in each of the 15 management areas in Malawi. The groundwater potential or long-term renewable resource (recharge) is given by the sum of Darcian throughflow and dry-season depletion of storage. Estimated rural demand exceeds the renewable resource in the fractured-rock aquifer in two management units and in the weathered-rock aquifer in two other units. Although there is inherent uncertainty in the water-balance estimates, the likelihood that rural demand is exceeding long-term average recharge in some areas is cause for concern.     

Bioassessment Techniques for Monitoring of Eutrophication and Nutrient Limitation in Coastal Ecosystems

Bioassesment by the use of the macroalga, Ulva lactuca L., was carried out in the Limfjord, Denmark, to assess the significance of nitrogen and phosphorus as limiting factors for primary production during 1985, 1993, 1994 and 1995 and for the detection of changes in eutrophication levels.

Minimum and critical tissue concentrations for nitrogen and phosphorus in macroalgae were identified. The concentrations of nitrogen were generally below the critical concentration level in June–October in 1985, 1993, and 1995 but in 1994 nitrogen was only limiting for primary production in short periods. Only in early spring in 1985 and 1993 were the tissue concentrations of phosphorus below the critical concentration level, whereas in 1994 up to 3–4 months showed phosphorus limited growth, indicating that significant changes in limitation patterns can occur between different years.

It was concluded that the use of biomonitoring techniques is well suited as a bioassessment method for direct detection and for providing a time-integrated measure of nutrient availability in coastal waters, and thus for assessing ecosystem health with regard to eutrophication. It is recommended that biomonitors and the concept of critical tissue concentrations should be used in environmental management and incorporated in future monitoring programmes.     

Finite Element Solvers for Biot’s Poroelasticity Equations in Porous Media

We study and compare five different combinations of finite element spaces for approximating the coupled flow and solid deformation system, so-called Biot’s equations. The permeability and porosity fields are heterogeneous and depend on solid displacement and fluid pressure. We provide detailed comparisons among the continuous Galerkin, discontinuous Galerkin, enriched Galerkin, and two types of mixed finite element methods. Several advantages and disadvantages for each of the above techniques are investigated by comparing local mass conservation properties, the accuracy of the flux approximation, number of degrees of freedom (DOF), and wall and CPU times. Three-field formulation methods with fluid velocity as an additional primary variable generally require a larger number of DOF, longer wall and CPU times, and a greater number of iterations in the linear solver in order to converge. The two-field formulation, a combination of continuous and enriched Galerkin function space, requires the fewest DOF among the methods that conserve local mass. Moreover, our results illustrate that three out of the five methods conserve local mass and produce similar flux approximations when conductivity alteration is included. These comparisons of the key performance indicators of different combinations of finite element methods can be utilized to choose the preferred method based on the required accuracy and the available computational resources.

     

Multi-scale permeability estimation for a tropical catchment

Physically based and spatially distributed modelling of catchment hydrology involves the estimation of block or whole-hillslope permeabilities. Invariably these estimates are derived by calibration against rainfall–runoff response. Rarely are these estimates rigorously compared with parameter measurements made at the small scale. This study uses a parametrically simple model, TOPMODEL, and an uncertainty framework to derive permeability at the catchment scale. The utility of expert knowledge of the internal catchment dynamics (i.e. extent of saturated area) in constraining parameter uncertainty is demonstrated. Model-derived estimates are then compared with core-based measurements of permeability appropriately up-scaled. The observed differences between the permeability estimates derived by the two methods might be attributed to the role of intermediate scale features (natural soil pipes). An alternative method of determining block permeabilities at the intermediate or hillslope scale is described. This method uses pulse-wave tests and explicitly incorporates the resultant effects of phenomena such as soil piping and kinematic wave migration. The study aims to highlight issues associated with parameterizing or validating distributed models, rather than to provide a definitive solution. The fact that the permeability distribution within the Borneo study catchment is comparatively simple, assists the comparisons. The field data were collected in terrain covered by equatorial rainforest. Combined field measurement and modelling programmes are rare within such environments. © 1998 John Wiley & Sons, Ltd.     

Understanding historical coastal spit evolution: A case study from Spurn,East Yorkshire,UK

Globally sandy coastlines are threatened by erosion driven by climatic changes and increased storminess. Understanding how they have responded to past storms is key to help manage future coastal changes. Coastal spits around the world are particularly dynamic and therefore potentially vulnerable coastal features. Therefore, how they have evolved over the last few centuries is of great importance. To illustrate this, this study focuses on the historical evolution of a spit at Spurn on the east coast of the UK, which currently provides critical protection to settlements within the Humber estuary. Through the combination of digitized historical mapping and luminescence dating, this study shows that Spurn has been a consistent coastal feature over at least the past 440 years. No significant westward migration was observed for the last 200 years. Results show a long-term extension of the spit and a decrease in its overall area, particularly in the last 50 years. Breaches of the neck cause temporary sediment pathway changes enabling westward extension of the head. Use of digitized historical maps in GIS combined with OSL dating has allowed a more complete understanding of long-term spit evolution and sediment transport modes at Spurn. In doing so it helps inform future possible changes linked to pressures, such as increases in storm events and sea-level rise. © 2020 The Authors. Earth Surface Processes and Landforms published by John Wiley & Sons Ltd     

Regional magma plumbing and emplacement mechanisms of the Faroe‐Shetland Sill Complex: implications for magma transport and petroleum systems within sedimentary basins

The movement of magma through the shallow crust and the impact of subsurface sill complexes on the hydrocarbon systems of prospective sedimentary basins has long been an area of interest and debate. Based on 3D seismic reflection and well data, we present a regional analysis of the emplacement and magmatic plumbing system of the Palaeogene Faroe‐Shetland Sill Complex (FSSC), which is intruded into the Mesozoic and Cenozoic sequences of the Faroe‐Shetland Basin (FSB). Identification of magma flow directions through detailed seismic interpretation of approximately 100 sills indicates that the main magma input zones into the FSB were controlled primarily by the NE–SW basin structure that compartmentalise the FSB into its constituent sub‐basins. An analysis of well data shows that potentially up to 88% of sills in the FSSC are <40 m in thickness, and thus below the vertical resolution limit of seismic data at depths at which most sills occur. This resolution limitation suggests that caution needs to be exercised when interpreting magmatic systems from seismic data alone, as a large amount of intrusive material could potentially be missed. The interaction of the FSSC with the petroleum systems of the FSB is not well understood. Given the close association between the FSSC and potential petroleum migration routes into some of the oil/gas fields (e.g. Tormore), the role the intrusions may have played in compartmentalisation of basin fill needs to be taken fully into account to further unlock the future petroleum potential of the FSB.