A mathematical hysteretic model for elastomeric isolation bearings

An analytical model for high damping elastomeric isolation bearings is presented in this paper. The model is used to describe mathematically the damping force and restoring force of the rubber material and bearing. Ten parameters to be identified from cyclic loading tests are included in the model. The sensitivity of the ten parameters in affecting the model is examined. These ten parameters are functions of a number of influence factors on the elastomer such as the rubber compound, Mullins effect, scragging effect, frequency, temperature and axial load. In this study, however, only the Mullins effect, scragging effect, frequency and temperature are investigated. Both material tests and shaking table tests were performed to validate the proposed model. Based on the comparison between the experimental and the analytical results, it is found that the proposed analytical model is capable of predicting the shear force–displacement hysteresis very accurately for both rubber material and bearing under cyclic loading reversals. The seismic response time histories of the bearing can also be captured, using the proposed analytical model, with a practically acceptable precision. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimal design of passive energy dissipation systems based on H∞ and H2 performances

Passive energy dissipation devices (EDDs), such as viscous dampers, viscoelastic dampers, etc., have been used to effectively reduce the dynamic response of civil infrastructures, such as buildings and bridges, subject to earthquakes and strong winds. The design of these passive energy dissipation devices (EDDs) involves the determination of the optimal locations and the corresponding capacities. In this paper, we present two optimal design methodologies for passive EDDs based on active control theories, including H_∞ and H₂ performances, respectively. The optimal design methodologies presented are capable of determining the optimal locations and the corresponding capacities of EDDs. Emphasis is placed on the application of linear matrix inequality (LMI) for the effective design of passive EDDs using the popular MATLAB toolboxes. One important advantage of the proposed approaches is that the computation of the structural response is not needed in the design process. The proposed optimal design methodologies have been applied to: (i) a 10‐storey building and a 24‐storey building both subject to earthquake excitations, and (ii) a 76‐storey wind‐excited benchmark building, to demonstrate the advantages of the proposed design methodologies over the conventional equal capacity design. Copyright © 2002 John Wiley & Sons, Ltd.     

Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.     

Study on effects of damping in laminated rubber bearings on seismic responses for a ⅛ scale isolated test structure

The effects of damping in various laminated rubber bearings (LRB) on the seismic response of a ?‐scale isolated test structure are investigated by shaking table tests and seismic response analyses. A series of shaking table tests of the structure were performed for a fixed base design and for a base isolation design. Two different types of LRB were used: natural rubber bearings (NRB) and lead rubber bearings (LLRB). Three different designs for the LLRB were tested; each design had a different diameter of lead plug, and thus, different damping values. Artificial time histories of peak ground acceleration 0.4g were used in both the tests and the analyses. In both shaking table tests and analyses, as expected, the acceleration responses of the seismically isolated test structure were considerably reduced. However, the shear displacement at the isolators was increased. To reduce the shear displacement in the isolators, the diameter of the lead plug in the LLRB had to be enlarged to increase isolator damping by more than 24%. This caused the isolator stiffness to increase, and resulted in amplifying the floor acceleration response spectra of the isolated test structure in the higher frequency ranges with a monotonic reduction of isolator shear displacement. Copyright © 2002 John Wiley & Sons, Ltd.     

初论古文化类型演替与传承模式的区域分异——以西拉沐沦河流域和汶泗流域为例

西拉沐沦河流域地处中国地貌大势三大台阶之中台阶与低台阶的过渡区。该区的中度抬升和下切,造成了西拉沐沦河流域考古文化遗址在空间上的垂向迁移;频繁的迁移也导致了考古遗址在堆积形态上主要表现为单一型,体现了不同考古文化之间“间断”的,不稳定的传承方式。位于中国地貌大势之低台阶上的汶泗流域,属自下古生代以来就十分稳定的剥蚀区,这些自然条件造成了汶泗流域遗址在堆积形态上主要表现为叠置型,考古文化在时空上,很少随着时间做空间上的改变,基本上在同一水平空间稳定不动,体现了不同考古文化之间“连续”、稳定的传承方式。两个流域的对比研究说明,不同地域、不同的自然条件,可以造成考古文化演替与传承模式的区域分异     

沙漠化:从圈层耦合到全球变化

从沙漠化概念提出伊始 ,沙漠化成因机理的研究就一直成为学术界关注的焦点。沙漠化过程究竟有多少是由自然因素所致 ,多少是由人类活动所为 ,诸因素与沙漠化之间有何内在关系 ,沙尘天气发生发展过程及其诱因等 ,当属地球系统科学应解决的难题。文章从全球变化的角度 ,将沙漠系统视作一种类生命的非线性动力系统 ,指出沙漠化源于地球表层系统各圈层之间复杂的相关与耦合作用 :气候变化是控制沙漠进退的首要因素 ;陆表水持续亏损则是导致干旱、半干旱地区沙漠化发展的直接原因 ;岩石圈构造运动塑造了不同的地形地貌单元 ,奠定了沙漠分布的地理格局 ;人类的不当活动和气候变化引起的生物生产力的衰退及土地覆盖的破坏 ,造成了现代沙漠化的快速扩张。     

华北古大陆与哥伦比亚超大陆

由Rogers和Santosh等 (2 0 0 2 )提出的哥伦比亚超大陆 ,是约从 1.9～ 1.5Ga由Nena ,Ur和Atlantic等 3个大陆块体群 ,通过逐步汇聚而形成的一个超级大陆。它是前罗迪尼亚古 -中元古时期的超大陆。从 1.5Ga开始的裂解作用使哥伦比亚超大陆逐步破裂 ,并在 1.0Ga左右这些破裂的大陆块体又重新汇聚形成罗迪尼亚超大陆。文中除介绍Rogers等提出的哥伦比亚超大陆的概念、组成和古大陆重建图外 ,重点阐述了中国华北古大陆 2 .0～ 1.8Ga期间吕梁—中条造山运动和 1.8～1.6Ga时期大规模裂解事件群的性质、特点和同位素年龄数据。文中提出哥伦比亚超大陆汇聚主要峰期与吕梁—中条造山运动的时限相一致 ,华北古大陆属于哥伦比亚超大陆的组成部分 ,并可能为Nena大陆块体群的一员 ,在造山及裂解事件群的性质、特点和时代等特征上 ,华北与北美、西伯利亚和西北欧有更大的相似性。     

中国区域成矿研究的若干问题及其与陆-陆碰撞的关系

在中国区域成矿作用研究中 ,遇到诸多重大问题 ,如 :(1)中国东部属于环太平洋地区之一 ,但为什么热液矿床大规模成矿时代不同于环太平洋的新生代 ,而爆发于中生代的燕山期 ?(2 )中国陆区经历了 >3.0Ga的演化 ,为什么大规模成矿作用在东部地区爆发于燕山期 ,西南特提斯成矿域爆发于新生代 ,而西北中亚成矿域爆发于海西期晚期 ?(3)国外不少著名成矿省位于太古宙克拉通内部 ,为什么中国的有色贵金属等热液矿床却集中分布于显生宙造山带内部或其边缘 ?(4)按照绿岩带金矿成矿理论 ,绿岩带型金矿化伴随或尾随于克拉通化 ,形成在太古宙 ,为什么中国绿岩带型金矿却形成在克拉通化后的 2 0多亿年以后的中生代 ?(5 )世界范围内 ,海相油田的重要性远大于陆相 ,为什么中国情况恰相反 ,陆相油田远比海相油藏重要 ?……。笔者认为这些问题彼此相关 ,代表了中国区域成矿的特色 ,其根本原因在于中国陆区不同构造单元经历了晚古生代以来的强烈碰撞事件 ,因此加强研究碰撞造山体制的成岩、成矿、成藏和流体作用是解决这些问题的关键途径。     

塑性岩体与逆冲构造变形关系讨论——库车坳陷西部实例分析

在冲断构造分析过程中 ,常常把塑性岩体仅仅作为滑脱层看待 ,忽略了一些地区塑性变形与冲断构造变形的复合作用。根据露头、钻井、地震等资料 ,应用平衡剖面等技术对库车坳陷西部的构造变形进行了恢复分析 ,发现库车坳陷西部的下第三系盐、膏、泥等塑性体受重力和构造应力联合作用发生了复杂的变形。以往单纯用冲断构造模式分析其成因机制 ,没能科学地反映中生界与新生界之间的变形缩短量的差异 ,通过塑性体的底辟变形和滑脱变形依存关系的剖析 ,能够恢复库车坳陷西部构造演化过程 ,进而为油气勘探提供指导。     

华北板块北缘活动带元古宙构造岩片

新的研究证实 ,华北板块北缘残存一条元古宙构造岩片堆集带 ,包括古元古代、中元古代、新元古代等多期构造岩片。并相伴有 180 0Ma±、140 0Ma±、10 0 0Ma±、6 5 0Ma±的花岗岩类的侵入活动和构造变质成矿等热事件的年代记录 ,并在华北板块北部金镶边带中保存了相一致的信息 ,揭示了它们是陆缘多期拼贴造山的产物。这为超大陆旋回 ,特别是元古宙两次超大陆的聚合与裂解及其构造演化过程的研究提供了良好的野外实验园地 ,并为元古宙、特别是古元古代大陆的增生及Rodinia超大陆在北半球的存在或构造响应提出新的课题。