Late Pleistocene and Holocene vegetation and climate records from Lake Kotokel, central Baikal region

Climatically driven Late Pleistocene and Holocene vegetation changes were reconstructed based on pollen records from the sediments of Lake Kotokel and Cheremushka Bog, located on the eastern shore of Lake Baikal. The described paleoenvironmental record has higher resolution than records collected from Lake Baikal and unites individual events identified in prior studies of bottom and onshore cores. Remarkable shifts in landscapes and expansions of index plants are as follows. Forest tundra and/or forest steppe landscape with birch, spruce, Artemisia, and Poaceae prevailed at ca. 50–25 ¹⁴C kyr BP. Tundra and/or steppe vegetation dominated by Artemisia and Poaceae was typical for the Last Glacial Maximum. The expansion of shrub birch and willow occurred at ca. 15.5 ¹⁴C kyr BP. Two peaks of spruce expansion at ca. 47.5–42.4 ¹⁴C kyr BP (Karginian time) and at ca. 14.5–13 ka (Bølling-Allerød warm intervals) suggest that the condition were more humid than today. A slight increase in Artemisia at ca. 11–10.5 ¹⁴C kyr BP (13–12 ka) was indicative of the Younger Dryas event. An expansion of birch forests with fir at ca. 12–6.4 ka suggests higher humidity. The currently dominant Scots and Siberian pine forests with birch expanded since 6.4 ka.     

Stable carbon isotope behaviour of natural seepage of deep underground C-rich methane detected along a fault zone and adsorbed in mudstone: Tokyo Bay area,Japan

Gas was sampled regionally, including by drilling into faults, in the South Kanto gas-field around Tokyo Bay, Japan. Gas samples were collected from cores in a gas sampling container immediately after drilling. A value of δ¹³C₁ = −44.3‰ was obtained for gas in the container and δ¹³C₁ = −36.3‰ for seeping gas in a fault zone. However, typical CH₄ in this dissolved-in-water gas-field is mainly depleted in ¹³C, and δ¹³C₁ values range from −66‰ to −68‰ owing to microbial degradation of organic material. ¹³C-rich CH₄ is so far uncommon in the South Kanto gas-field. Seepages were observed from the surface along the north–south fault zone. The natural gas is stored below the sandstone layer by impermeable mudstone underlying the boundary at a depth of 30 m. Gas seepages were not observed below a depth of 40 m. Gas rises along the fault zone dissolved-in-groundwater up to the shallow region and then separates from the groundwater. ¹³C-rich CH₄ (adsorbed CH₄) was found to have desorbed from drilled mudstone core samples taken at depths of 1400–1900 m in the main gas-production strata. Similarly, ¹³C-rich CH₄ was found in black shale overlying the oceanic crust forming part of a sedimentary accretionary prism underling the Tokyo region. It also appears in the spring-water of spa wells, originating at a depth of 1200–1500 m along a tectonic line. Methane generated by microbial degradation of organic material through CO₂ reduction in the South Kanto gas-field mainly originates as biogenic gas mixed with a small amount of ¹³C-rich CH₄, derived from thermogenic gas without oil components in strata. It is assumed that ¹²C-rich CH₄ is easily detached from core or pore water through gas production, whereas ¹³C-rich CH₄ is strongly adsorbed on the surfaces of particles. The ¹³C-rich CH₄ rises along the major tectonic line or up the 50 m wide normal fault zone from relatively deep sources in the Kanto region.     

Correlation of large displacement drained shear strength of landslide soils measured by direct shear and ring shear devices

Based on a laboratory study of drained direct shear tests of remoulded, pre-cut and polished specimens and drained ring shear tests of uncut and remoulded specimens of slip surface materials of five landslide soils, significant correlations of the mobilized shear strength parameters, cohesion (c, c _r) and internal friction angle (Φ, Φ_r), are proposed. The investigated soils consisted of the slip surface material belonging to tuffaceous clay, mudstone, loess and siltstone. Most of the previous studies on residual shear strength measured by reversal direct shear and ring shear devices have obtained significantly different results using the two devices, even when pre-cut and polished specimens were used in the direct shear device. In this study, the residual shear strength values of remoulded specimens measured by a ring shear device are shown to significantly correlate with the drained large displacement shear strength values of remoulded specimens, which were measured using pre-cut and polished specimens in a direct shear device. The correlation between the cohesion measured in the two shear devices is expressed by the linear relationship, $ {c_{\text{r}}} = 0.{7394}c - {6}.{6857} $ , while the correlation between the friction angle measured in the two devices is expressed by the linear relationship, $ {\Phi_{\text{r}}} = {1}.0{852}\Phi - {6}.0{247} $ . The proposed linear correlations for effective cohesion (c′) and effective friction angle (Φ′) have yielded significant coefficients of determination within an effective normal stress range of 30–150?kN/m².     

Levels and distribution of polybrominated diphenyl ethers and organochlorine compounds in sea turtles from Japan

Three species of sea turtles (green, hawksbill and loggerhead turtles) stranded along the coasts or caught (by-catch) around Ishigaki Island and Kochi, Japan were collected between 1998 and 2006 and analyzed for six organohalogen compounds viz., PBDEs, PCBs, DDTs, CHLs, HCHs and HCB. The present study is the first and foremost to report the occurrence of organohalogen compounds in the sea turtles from Japan. Among the compounds analyzed, concentrations of PCBs, DDTs and CHLs were the highest in all the turtle samples. PBDEs were ubiquitously present in all the turtle species. Comparing with the other two species, concentrations of organohalogens in green turtle were relatively low and decreasing trend in the concentrations were noted with increasing carapace length. Concentrations of OCs in sea turtles from the coasts of Ishigaki Island and Kochi were relatively low as compared to those from other locations in the world.     

Multistage melt/fluid-peridotite interactions in the refertilized lithospheric mantle beneath the North China Craton: constraints from the Li–Sr–Nd isotopic disequilibrium between minerals of peridotite xenoliths

Elemental and Li–Sr–Nd isotopic data of minerals in spinel peridotites hosted by Cenozoic basalts allow us to refine the existing models for Li isotopic fractionation in mantle peridotites and constrain the melt/fluid-peridotite interaction in the lithospheric mantle beneath the North China Craton. Highly elevated Li concentrations in cpx (up to 24 ppm) relative to coexisting opx and olivine (<4 ppm) indicate that the peridotites experienced metasomatism by mafic silicate melts and/or fluids. The mineral δ⁷Li vary greatly, with olivine (+0.7 to +5.4‰) being isotopically heavier than coexisting opx (−4.4 to −25.9‰) and cpx (−3.3 to −21.4‰) in most samples. The δ⁷Li in pyroxenes are considerably lower than the normal mantle values and show negative correlation with their Li abundances, likely due to recent Li ingress attended by diffusive fractionation of Li isotopes. Two exceptional samples have olivine δ⁷Li of −3.0 and −7.9‰, indicating the existence of low δ⁷Li domains in the mantle, which could be transient and generated by meter-scale diffusion of Li during melt/fluid-peridotite interaction. The ¹⁴³Nd/¹⁴⁴Nd (0.5123–0.5139) and ⁸⁷Sr/⁸⁶Sr (0.7018–0.7062) in the pyroxenes also show a large variation, in which the cpx are apparently lower in ⁸⁷Sr/⁸⁶Sr and slightly higher in ¹⁴³Nd/¹⁴⁴Nd than coexisting opx, implying an intermineral Sr–Nd isotopic disequilibrium. This is observed more apparently in peridotites having low ⁸⁷Sr/⁸⁶Sr and high ¹⁴³Nd/¹⁴⁴Nd ratios than in those with high ⁸⁷Sr/⁸⁶Sr and low ¹⁴³Nd/¹⁴⁴Nd, suggesting that a relatively recent interaction existed between an ancient metasomatized lithospheric mantle and asthenospheric melt, which transformed the refractory peridotites with highly radiogenic Sr and unradiogenic Nd isotopic compositions to the fertile lherzolites with unradiogenic Sr and radiogenic Nd isotopic compositions. Therefore, we argue that the lithospheric mantle represented by the peridotites has been heterogeneously refertilized by multistage melt/fluid-peridotite interactions.     

Groundwater flow system in Bengal Delta,Bangladesh revealed by environmental isotopes

A total number of 328 groundwater samples are analysed to evaluate the groundwater flow systems in Bengal Delta aquifers, Bangladesh using environmental isotope (²H, ¹⁸O, ¹³C, ³H, and ¹⁴C) techniques. A well-defined Local Meteoric Water Line (LMWL) δ²H = 7.7 δ¹⁸O + 10.7 ‰ is constructed applying linear correlation analyses to the monthly weighted rainfall isotopic compositions (δ¹⁸O and δ²H). The δ¹⁸O and δ²H concentrations of all groundwater samples in the study area are plotted more or less over the LMWL, which provides compelling evidence that all groundwaters are derived from rainfall and floodwater with a minor localized evaporation effects for the shallow groundwaters. Tritium concentration is observed in 40 samples out of 41 with values varying between 0.3 and 5.0 TU, which represents an evidence of young water recharge to the shallow and intermediate aquifers. A decreasing trend of ¹⁴C activity is associated with the heavier δ¹³C values, which indicates the presence of geochemical reactions affecting the ¹⁴C concentration along the groundwater flow system. Both vertical and lateral decrease of ¹⁴C activity toward down gradient show the presence of regional groundwater flow commencing from the unconfined aquifers, which discharges along the coastal regions. Finally, shallow, intermediate, and deep groundwater flow dynamics has revealed in the Bengal Delta aquifers, Bangladesh.     

Hydrothermal activity on the southern Mid-Atlantic Ridge: Tectonically- and volcanically-controlled venting at 4–5°S

We report results from an investigation of the geologic processes controlling hydrothermal activity along the previously-unstudied southern Mid-Atlantic Ridge (3–7°S). Our study employed the NOC (UK) deep-tow sidescan sonar instrument, TOBI, in concert with the WHOI (USA) autonomous underwater vehicle, ABE, to collect information concerning hydrothermal plume distributions in the water column co-registered with geologic investigations of the underlying seafloor. Two areas of high-temperature hydrothermal venting were identified. The first was situated in a non-transform discontinuity (NTD) between two adjacent second-order ridge-segments near 4°02′S, distant from any neovolcanic activity. This geologic setting is very similar to that of the ultramafic-hosted and tectonically-controlled Rainbow vent-site on the northern Mid-Atlantic Ridge. The second site was located at 4°48′S at the axial-summit centre of a second-order ridge-segment. There, high-temperature venting is hosted in an  18 km² area of young lava flows which in some cases are observed to have flowed over and engulfed pre-existing chemosynthetic vent-fauna. In both appearance and extent, these lava flows are directly reminiscent of those emplaced in Winter 2005−06 at the East Pacific Rise, 9°50′N and reference to global seismic catalogues reveals that a swarm of large (M 4.6−5.6) seismic events was centred on the 5°S segment over a  24 h period in late June 2002, perhaps indicating the precise timing of this volcanic eruptive episode. Temperature measurements at one of the vents found directly adjacent to the fresh lava flows at 5°S MAR (Turtle Pits) have subsequently revealed vent-fluids that are actively phase separating under conditions very close to the Critical Point for seawater, at  3000 m depth and 407 °C: the hottest vent-fluids yet reported from anywhere along the global ridge crest.     

Elevated sedimentation in lake records linked to agricultural activities in the Ishikari River floodplain,northern Japan

The purpose of this study was to examine the historical change in sedimentation rates in lakes that have been impacted by river regulation and agricultural activities in the Ishikari River floodplain. We dated sediment cores using caesium‐137 (¹³⁷Cs) dating and tephrochronology, and we estimated sediment sources from ¹³⁷Cs concentrations in the topsoil of representative land covers. We found that, between 1739 and 1963, the distance between the lake and the main river channel and whether or not the lake was connected to the river affected the sedimentation rates. After 1963, agricultural drainage systems were established in the Ishikari River floodplain. The average sedimentation rate before and after the construction of drainage ditches varied between 1–66 and 87–301 mg cm^–2 a^–1, respectively. The increase in the sedimentation rate after 1963 was caused by the construction of a number of drainage networks, as well as extensive cultivation activity and/or fragmentation of the swamp buffers surrounding the lakes. The ¹³⁷Cs activities at the surfaces of the lake as well as the catchment‐derived ¹³⁷Cs contributions and ¹³⁷Cs inventory in the lake profiles were used to examine the sediment influx from the various drainage areas after the establishment of the drainage system. Our results indicate that the majority of the lake sediments were derived from cultivated areas, and therefore the catchment‐derived ¹³⁷Cs contribution in the lakes was strongly correlated with the sedimentation rate. The ¹³⁷Cs inventory across all of the lake profiles was also significantly greater than the atmospheric fallout. We identified a negative correlation between the ¹³⁷Cs lake profile inventory and the sedimentation rate. This is because the sediment originating from the drainage areas contained low ¹³⁷Cs concentrations, which diluted the overall concentration of ¹³⁷Cs in the lake sediment. Copyright © 2009 John Wiley & Sons, Ltd.     

Diffusive dehydration and bubble resorption during open-system degassing of rhyolitic melts

Degassing through open paths such as bubble and/or fracture networks is considered to be the principal mode of degassing in silicic magmas. However, its detailed mechanisms remain unclear. To investigate the behavior of bubbles in a hypothetical open-system condition, we performed a series of vesiculation experiments on natural rhyolitic obsidian using a newly designed semipermeable cell, which artificially maintains a pressure difference between its inside and outside. The thick-wall cell maintains a constant volume within the sample chamber, while allowing water vapor to escape the cell during the experimental runs. The cells containing obsidian cores with ca. 0.66 wt.% initial water content were externally heated to 1000 °C for a period of 1–288 h. The run charges generally showed a zonal structure composed of two contrasting regions: a central region within which the bubbles were concentrated (bubble-rich core, BC) and a bubble-free melt region surrounding the BC (bubble-free margin, BFM). With increased heating duration, the thickness of the BFM increased via dissolution of the outermost bubbles in the BC. The water content was nearly uniform throughout the BC, whereas an outward-decreasing gradient was observed in the BFM. We found that diffusive dehydration occurred from the sample surface, and the bubbles were resorbed into the melt. Thus, the BFM–BC boundary moved inwards. These processes were modelled numerically, and the calculation results were in good agreement with the experimental data. If a “lifetime” of open paths is approximated as the relaxation time of a melt in a shallow volcanic environment, then the paths have to be pinched off quickly (1.2 h at maximum pressure difference between the open path and the melt) and thus the thickness of the bubble-free layer reaches at most ~ 0.1 mm. For the formation of bubble-free obsidian layers with a width of a few millimeters, which are often observed in natural obsidian flows, open paths should be maintained for at least a few hundred hours.     

Large aperture seismic imaging at a convergent margin: Techniques and results from the Costa Rica seismogenic zone

In March and April 1995 a cooperative German, Costa Rican, and United States research team recorded onshore-offshore seismic data sets along the Pacific margin of Costa Rica using the R/V Ewing. Off the Nicoya Peninsula we used a linear array of ocean bottom seismometers and hydrophones (OBS/H) with onshore seismometers extending across much of the isthmus. In the central area we deployed an OBS/H areal array consisting of 30 instruments over a 9 km by 35-km area and had land stations on the Nicoya Peninsula adjacent to this marine array and also extending northeast on the main Costa Rican landmass. Our goal in these experiments was to determine the crustal velocity structure along different portions of this convergent margin and to use the dense instrument deployments to create migrated reflection images of the plate boundary zone and the subducting Cocos Plate. Our specific goal in the central area was to determine whether a subducted seamount is present at the location of the 1990, M 7 earthquake off the Nicoya Peninsula and can thus be linked to its nucleation. Subsequently we have processed the data to improve reflection signals, used the data to calculate crustal velocity models, and developed several wide-aperture migration techniques, based on a Kirchhoff algorithm, to produce reflection images. Along the northern transect we used the ocean bottom data to construct a detailed crustal velocity model, but reflections from the plate boundary and top and bottom of the subducting Cocos plate are difficult to identify and have so far produced poor images. In contrast, the land stations along this same transect recorded clear reflections from the top of the subducting plate or plate boundary, within the seismogenic zone, and we have constructed a clear image from this reflector beneath the Nicoya shelf. Data from the 3-D seismic experiment suffer from high-amplitude, coherent noise (arrivals other than reflections), and we have tried many techniques to enhance the signal to noise ratio of reflected arrivals. Due to the noise, an apparent lack of strong reflections from the plate boundary zone, and probable structural complexity, the resulting 3-D images only poorly resolve the top of the subducting Cocos Plate. The images are not able to provide compelling evidence of whether there is a subducting seamount at the 1990 earthquake hypocenter. Our results do show that OBS surveys are capable of creating images of the plate boundary zone and the subducting plate well into the seismogenic zone if coherent reflections are recorded at 1.8 km instrument spacing (2-D) and 5 km inline by 1 km crossline spacing for 3-D acquisition. However, due to typical high amplitude coherent noise, imaging results may be poorer than expected, especially in unfavorable geologic settings such as our 3-D survey area. More effective noise reduction in acquisition, possibly with the use of vertical hydrophone arrays, and in processing, with advanced multiple removal and possibly depth filtering, is required to achieve the desired detailed images of the seismogenic plate boundary zone.