Collapse assessment of steel moment frames using endurance time method

In endurance time(ET) method structures are subjected to a set of predesigned intensifying excitations. These excitations are produced in a way that their response spectrum, while complying with a specifi ed spectrum, intensifi es with time so they can be used approximately to simulate the average effects of several ground motions scaled to different intensities. In this paper applicability of the ET method for evaluating collapse potential of buildings is investigated. A set of four steel moment frames is used for collapse assessment. The process of using ET method in collapse evaluation is explained and the results are compared with incremental dynamic analysis(IDA) results. It is shown that although the computational effort using the ET method is much less than the IDA analysis, the results of both methods are consistent. Finally collapse fragility curves using ET and IDA methods are produced and it is shown that the probabilities of collapse in different hazard levels are also consistent.     

Large-scale seismic isolation through regulated liquefaction: a feasibility study

Using controlled liquefaction, a seismic isolation technique is introduced by which a large area with dozens of structures can be seismically isolated. The proposed Large Scale Seismic Isolation (LSSI) is in many ways similar to conventional base isolations. The required bearing is provided by a fully undrained pre-saturated liquefiable layer which has substantial vertical stiffness/capacity and minimal lateral stiffness. Moreover, required energy dissipation would be provided through material damping and Biot flow-induced damping within the liquefied layer. LSSI consists of a thick nonliquefiable crust layer and an underlying engineered pre-saturated liquefiable layer bounded by two impermeable thin clay layers. The liquefiable layer should be designed to trigger liquefaction as soon as possible within the early seconds of a design level seismic event. Adopting the energy-based GMP liquefaction theory, optimum gradation of the liquefiable layer is also investigated. It turned out that LSSI would effectively reduce acceleration response spectrum within short to medium periods. Contribution of the proposed LSSI is more pronounced in the case of stronger ground motions such as near field events as well as ground motions with longer return periods.     

Delineation of groundwater potential zones using remote sensing,GIS, and AHP technique in Tehran–Karaj plain,Iran

Evaluation of groundwater resources in dry areas without enough data is a challenging task in many parts of the world, including Tehran–Karaj plain in Iran, which includes Tehran, the capital city of Iran and Karaj, one of Iran’s biggest cities. Water demand due to increasing agricultural and industrial activities caused many problems in the field of water resources management. In this study, the potential of groundwater resources was evaluated using remote sensing, geographic information system (GIS), and analytic hierarchy process (AHP) for the first time. Digital Elevation Model from Shuttle Radar Topography Mission was used to generate a slope map and drainage density map. Three Landsat-8 satellite images were utilized to provide lineament density and land cover/land use maps. Geological and soil type maps were provided from the Geological Survey and Mineral Explorations of Iran (GSI). Tropical Rainfall Measuring Mission data were used to prepare average annual precipitation map. Discharge values from 102 pumping wells in the time period of 2002–2014 were used to evaluate the results. Seven data layers were prepared, and the geodatabase was made in GIS. The layers and their classes were assigned weights using AHP method. Finally, the layers were overlaid based on their weights, and the potential map of groundwater resources was generated. The area was classified into five zones with very high, high, moderate, low, and very low potentials. The zones covered 5.95, 32.90, 22.70, 10.20, and 28.25% of the study area, respectively. The results showed good agreement with the field data obtained from discharge wells.     

Comparison of different gravity field implied density models of the topography

Density within the Earth crust varies between 1.0 and 3.0 g/cm³. The Bouguer gravity field measured in south Iran is analyzed using four different regional-residual separation techniques to obtain a residual map of the gravity field suitable for density modeling of topography. A density model of topography with radial and lateral distribution of density is required for an accurate determination of the geoid, e.g., in the Stokes-Helmert approach. The apparent density mapping technique is used to convert the four residual Bouguer anomaly fields into the corresponding four gravity im-plied subsurface density (GRADEN) models. Although all four density models showed good correlation with the geological density (GEODEN) model of the region, the GRADEN models obtained by high-pass filter-ing and GGM high-pass filtering show better numerical correlation with GEODEN model than the other models.     

The application of GPR and ERI in combination with exposure logging and retrodeformation analysis to characterize sinkholes and reconstruct their impact on fluvial sedimentation

This work illustrates the practicality of investigating sinkholes integrating data gathered by ground penetrating radar (GPR), electrical resistivity imaging (ERI) and trenching or direct logging of the subsidence‐affected sediments in combination with retrodeformation analysis. This mutidisciplinary approach has been tested in a large paleosinkhole developed during the deposition of a Quaternary terrace on salt‐bearing evaporites. The subsidence structure, exposed in an artificial excavation, is located next to Puilatos, a village that was abandoned in the 1970s due to severe subsidence damage. Detailed logging of the exposure revealed that the subsidence structure corresponds to an asymmetric sagging and collapse paleosinkhole with no clear evidence of recent activity. The sedimentological and structural relationships together with the retrodeformation analysis indicate that synsedimentary subsidence controlled channel location, the development of a palustrine environment and local changes in the channel pattern. GPR profiles were acquired using an array of systems with different antenna frequencies, including some recently developed shielded antennas with improved vertical resolution and penetration depth. Although radargrams imaged the faulted sagging structure and provided valuable data on fault throw, they did not satisfactorily image the complex architecture of the fluvial deposit. ERI showed lower resolution but higher penetration depth when compared to GPR, roughly capturing the subsidence structure and yielding information on the thickness of the high‐resistivity alluvium and the nature of the underlying low‐resistivity karstic residue developed on top of the halite‐bearing evaporitic bedrock. Data comparison allows the assessment of the advantages and limitations of these complementary techniques, highly useful for site‐specific sinkhole risk management. Copyright © 2016 John Wiley & Sons, Ltd.     

GeoTxt: A scalable geoparsing system for unstructured text geolocation

In this article we present GeoTxt, a scalable geoparsing system for the recognition and geolocation of place names in unstructured text. GeoTxt offers six named entity recognition (NER) algorithms for place name recognition, and utilizes an enterprise search engine for the indexing, ranking, and retrieval of toponyms, enabling scalable geoparsing for streaming text. GeoTxt offers a flexible application programming interface (API), allowing for customized attribute and/or spatial ranking of retrieved toponyms. We evaluate the system on a corpus of manually geo‐annotated tweets. First, we benchmark the performance of the six NERs that GeoTxt provides access to. Second, we assess GeoTxt toponym resolution accuracy incrementally, demonstrating improvements in toponym resolution achieved (or not achieved) by adding specific heuristics and disambiguation methods. Compared to using the GeoNames web service, GeoTxt's toponym resolution demonstrates a 20% accuracy gain. Our results show that places mentioned in the same tweet do not tend to be geographically proximate.