Comparison between measured and predicted values of axial end bearing and skin capacity of piles bored in cohesionless soils in the Arabian Gulf Region

The axial base and skin capacities of piles bored in cohesion less soils are often estimated using empirical, semi-empirical and theoretical methods. The aim of this paper is to assess the applicability and evaluate the accuracy of different predictions methods available in the literature, via comparison with data from 43 field pile load tests conducted on shafts drilled in the region of the United Arab Emirates. Janbu's theoretical method (1989) with the parameter (=75°) and Vesics theoretical method (1975) yielded accurate predictions for the base resistances. Burlands approach (1973) overpredicts the skin capacities with an average predicted-to-estimated ratio (q _p /q _e) of three times greater than the unity while using values of the coefficient of earth pressure (k=05k _o ) and the angle of soil-pile friction (=23).     

Controlling factors of groundwater hydrochemistry in a small island’s aquifer

Factor analysis was applied to the hydrochemical data set of Manukan Island in order to extract the principal factors corresponding to the different sources of variation in the hydrochemistry. The application of varimax rotation was to ensure the clear definition of the main sources of variation in the hydrochemistry. The geochemical data of dissolved major, minor and trace constituents in the groundwater samples indicates the main processes responsible for the geochemistry evolution. By using Kaiser normalization, principal factors were extracted from the data for each location. The analysis reveals that there are four sources of solutes: (1) seawater intrusion; (2) leaching process of underlying rock mediated by pH; (3) minerals weathering process and (4) dissolution of carbonate minerals characterized by high loadings of Ca, Zn and Mg. Such processes are dominated by the significant role of anthropogenic impact from the over abstraction of fresh water from the aquifer. Those factors contributed to the changes of the groundwater geochemistry behavior explain the effect of rising extraction of freshwater from the aquifer.     

Eocene tonalite–granodiorite from the Havza (Samsun) area,northern Turkey: adakite-like melts of lithospheric mantle and crust generated in a post-collisional setting

ABSTRACT

Eocene intermediate to felsic plutons of different sizes and compositions are widespread in the Eastern Pontides Orogenic Belt in northern Turkey. Of these, the Ta?l?k Tepe pluton in the Havza (Samsun) area is fine-to-medium-grained, with granular, porphyritic, and micrographic textures, and include mafic microgranular enclaves (MMEs). LA-ICP-MS U-Pb zircon dating yielded emplacement ages of 42.9 (± 1.4) and 40.5 (± 1.3) Ma for the host granodioritic pluton and the dioritic MMEs, respectively. Petrochemically, the host pluton has I-type, high-K calc-alkaline, and metaluminous-to-slightly peraluminous features (A/CNK = 0.95–1.06). The host pluton also shows geochemical features of adakite-like rocks with high SiO₂ (67–68 wt%) and Al₂O₃ (15.5–16.0 wt%) content and Ba/La (17–23), Sr/Y (40.7–61.6), and La_N/Yb_N (14.4–23.7) ratios and low Y (8.2–9.9 ppm) and Yb_N (3.1–4.4) contents. Whole-rock major and trace element variations suggest that fractional crystallisation played a significant role in the pluton evolution. The N-MORB normalised trace element patterns of the pluton are similar to those of MMEs with enrichment in large-ion lithophile elements, Th and Ce, and negative Nb and Ti anomalies. Chondrite-normalised rare earth element plots show moderate-to-highly enriched concave patterns (La_N/Lu_N = 14.2–21.6) with insignificant negative Eu anomalies (Eu_N/Eu* = 0.86–1.14), all of which imply hornblende fractionation during magmatic evolution. The pluton samples have ⁸⁷Sr/⁸⁶Sr ratios of 0.704767 to 0.704927, ¹⁴³Nd/¹⁴⁴Nd ratios of 0.512767–0.512774, εNd values of (+2.52) – (+2.65), and δ¹⁸O values of 7.9–9.7‰. The isotopic compositions of the host pluton and MMEs are similar to I-type granitoids derived from mantle sources. The MMEs show incomplete magma mixing/mingling, representing small bodies of mafic parental magma. Combined with regional studies, these new data suggest that the parental magma of the studied adakite-like pluton was generated from the lithospheric mantle and then modified by fractional crystallisation and assimilation in a post-collisional setting.     

Swelling Behaviour of Expansive Shales from the Middle Region of Saudi Arabia

Severe and widespread damage in residential buildings, sidewalks and pavements in various parts of the middle region of Saudi Arabia is caused by the development of heave and swelling pressure in the expansive shales in the region. This paper presents the problems and the geotechnical and physicochemical properties of the tested shales. The swelling potential was determined using various methods. Swell tests were conducted under different loading conditions and following different procedures to quantify the amount of vertical swell and swelling pressure. The conventional one-dimensional oedometer swell tests were performed using three different procedures, namely, free swell, constant volume swell and swell overburden. In addition, swell tests were performed in the stress path triaxial apparatus. Tests under different vertical stresses and confinements were conducted. Vertical swell and swelling pressure obtained from the various methods were compared. The reliability of the different methods for estimation of swelling potential is discussed.     

Young magmatism in Afghanistan as the consequence of the neocene-quaternary tectonic movements

A considerable portion of the territory of Afghanistan, having structures of the Mediterranean folded belt, has been subjected to a general tectonomagmatic activization over the Miocene through to the present, resulting in different (predominantly oscillating) tectonic movements, intrusive magmatism, terrestrial volcanism, mineral occurrences, and springs of carbonated and nitrous thermal water.Three types of young magmatism and volcanism products have been recognized in Afghanistan:

1. (1) Miocene alkaline granite intrusions, described as the Share—Arman Complex, resulted from the early orogenic stage of the Late Alpine geosynclinal troughs development and were restricted to transversal uplifts, in both the geosynclinal structures and on their extension, in the surrounding median masses. These transversal uplifts also play the role of mineralization-controlling structures.

2. (2) Late orogenic—Early Quaternary volcanics (the Dash-i-Nawar Complex) cropping out by the periphery of median masses and at the marginal uplifts of the Late Alpine folded area and also restricted to the transversal uplifts with the confined fault zones to them.

3. (3) Alkaline carbonatitic (the Khanneshin Complex) and trachybasaltic (the SarLogh Complex) Early—Middle Quaternary volcanics in the inner parts of the Central Afghanistan Median Mass and in the southeastern segment of the Turan Plateau.

Areas with products of Middle Quaternary volcanism are restricted to knot areas of the major subcrustal faults which are currently active.     

Genesis of tin and tantalum mineralization in pegmatites from the Bynoe area,Pine Creek Geosyncline,Northern Territory

The tin‐ and tantalum‐bearing pegmatites of the Bynoe area are located in the western Pine Creek Geosyncline. They are emplaced within psammopelitic rocks in the contact aureole of the Two Sisters Granite. The latter is a Palaeoproterozoic, fractionated, granite with S‐type characteristics and comprises a syn‐ to late‐orogenic, variably foliated, medium‐grained biotite granite and a post‐orogenic, coarse‐grained biotite‐muscovite granite. The pegmatites comprise a border zone of fine grained muscovite + quartz followed inward by a wall zone of coarse grained muscovite + quartz which is in turn followed by an intermediate zone of quartz + feldspar + muscovite. A core zone of massive quartz is present in some occurrences. Feldspars in the intermediate zone are almost completely altered to kaolinite. This zone contains the bulk of cassiterite, tantalite and columbite mineralization. Fluid inclusions in pegmatitic quartz indicate that early Type A (CO₂ + H₂O ± CH₄) inclusions were trapped at the H₂O‐CO₂ solvus at P～100 MPa, T～300°C (range 240–328°C) and salinity ～6 wt% eq NaCl. Pressure‐salinity corrected temperatures on Type B (H₂O + ～20% vapour), C (H₂O + < 15% vapour) and D (H₂O + halite + vapour) inclusions also fall within the range of Type A inclusions. Oxygen and hydrogen isotope data show that kaolin was either formed in isotopic equilibrium with meteoric waters or subsequent to its formation, from hydrothermal fluid, underwent isotopic exchange with meteoric waters. Fluid inclusion waters from core zone quartz show enrichment in deuterium suggesting metamorphic influence. Isotope values on muscovite are consistent with a magmatic origin. It is suggested that the pegmatites were derived from the post‐orogenic phase of the Two Sisters Granite. Precipitation of cassiterite took place at about 300°C from an aqueous fluid largely as a result of increase in pH due to feldspar alteration.     

Numerical Prediction of Induced Pressure and Lift of the Planing Surfaces

This paper discusses the numerical prediction of the induced pressure and lift of the planing surfaces in a steady motion based on the potential flow solver as well as the spray drag by use of the practical method.The numerical method for computation of the induced pressure and lift is potential-based boundary element method.Special technique is identified to present upwash geometry and to determine the spray drag.Numerical results of a planing flat plate and planing craft model 4666 are presented.It is shown that the method is robust and efficient and the results agree well with the experimental measurements with various Froude humors.     

Understanding nesting ecology and behaviour of green marine turtles at Setiu,Terengganu, Malaysia

In this paper, we emphasize the importance of understanding the nesting ecology and nesting behaviour of green marine turtles (Chelonia mydas). Data were collected from 2007 until 2012 from nesting beaches at Setiu Terengganu, Malaysia. We focused on one of the beaches, Telaga Papan, based on data collected in 2012. We recorded the distribution of nesting areas, the emergence hour and the correlation between successful nesting attempts and false crawls. Telaga Papan had a significantly higher distribution of green marine turtle nesting compared with the other five beaches (ANOVA, F_5,42 = 8.874, P < 0.01, mean = 36.750 ± 3.727). The highest number of successful nesting attempts was recorded in 2012 (mean = 28.714). A majority of the species landed between 22:00 and 23:59 h (25%). There was a strong correlation between successful nesting attempts and false crawls (r_s = 0.883, P = 0.02). Based on these findings on the nesting ecology and nesting behaviour of green marine turtles, we suggest that scientific research, strict monitoring, awareness programs and policy implementation should be carried out proactively. Such activities are necessary to reduce the anthropogenic pressures at the nesting beaches as well as to ensure more successful nesting attempts of green marine turtles in Setiu.     

Comparison of Near Coastal Significant Wave Height Measurements from SARAL/AltiKa with Wave Rider Buoys in the Indian Region

Significant Wave Height (SWH) measurement data from the AltiKa Radar Altimeter (RA) for the first 13 cycles of satellite coverage are compared with the SWH from Wave Rider Buoys (WRB) located at nine stations along the Indian coast to assess the performance of the altimeter over the coastal region. AltiKa SWH observations within a 30-minute interval and 50 km distance from WRBs are found to be over estimated by 6%, the Root Mean Square Error (RMSE) is 0.36 m, the Scatter Index (SI) is 26%, and the correlation coefficient (r) is 0.91. Relaxing the distance criteria by 50 km leads to increase in RMSE and deterioration of r to 0.89. There is a marked difference in the statistics on the comparison pairs pooled separately for the buoys near west and east coasts, with the latter showing RMSE error 26% more than the former. The method of Cressman weights adopted to correct for the errors arising out of the temporal and spatial differences in altimeter and buoy data comparison pairs resulted in reduction of RMSE by 5% and 25%, respectively, for the 30-minute and 50 km criteria and 4% and 56% for the 30-minute and 100 km criteria.